Lost Alarm/immobiliser remote, how can i start my car to get it fixed?

**FastFwd** · 11-09-2007 01:25 AM

Ive got a Cheetah 777 Alarm system like in link below:

http://www.actionalarms.com.au/Alarms/Cheetah%20777.htm

Lost my keys with remote but found a spare car key but doesnt have have the remote and i cant start the car without it. anyone know an override so i can get it to a shop tomorrow to fix

**IZY-10** · 11-09-2007 02:00 AM

check your manual it usually tells you how to override it

**FastFwd** · 11-09-2007 02:05 AM

don't have manual...was installed on the car like 5 yrs ago

**D4rk4n63l** · 11-09-2007 07:43 AM

do you know where the alarm module is? if so, just cut the wires and bypass the ignition / starter motor / fuel pump immobilizer circuit... looking at the website you gave us, it looks like your alarm only has 2 point immobilizer circuits, so it should be a combination of the three I mentioned...

**Bayani** · 11-09-2007 08:48 AM

Ensure you turn your Siren off too. :]

**FastFwd** · 11-09-2007 02:17 PM

all good, gettin RAC to come out and disable my ammobiliser then goin to cyclops joint tomorrow to get two remotes replaced...costin me $165

harsh

**Bayani** · 15-09-2007 02:27 AM

You can jsut call Cyclops you know mate.

**FastFwd** · 15-09-2007 11:53 AM

Originally Posted by Bayani

You can jsut call Cyclops you know mate.

All done....got the RAC to come out to disable my immobilizer then the next day i brought it to my mate who works at a cyclops joint. and he hooked me up with two new remotes for fek all...