Page 1 of 3 123 LastLast
Results 1 to 12 of 34
  1. #1
    Member Array
    Join Date
    Nov 2007
    Location
    Penrith, nsw
    Car:
    Dc2r CW

    Civic EG rim size

    I was checking out this site urbanimport.com i think its a american site but they sell rota slipstream for pretty cheap and i was wondering what type of offset and size would be for my 93 EG

    Im looking for a 15" or 16" but not sure which 15x6.5, 15x7, 15x8, and the same in 16"s

    Just looking for a little advise on which fits/looks best or anyone else that has this rim on their civic.

  2. #2
    DBG Krogoth Array
    Join Date
    Sep 2005
    Location
    DBG Garage
    Car:
    M35
    EG stock rims are 14" steelies, and by law (in VIC and most states) u can increase the rolling diameter by 15mm...

    on most practical uses, u can use 15 or 16" rims (without sacrificing fuel economy)...on another note, i've seen ppl use 19s on EGs but they'd have to roll their guards...

    the rim offset for EGs are between 35-45...so it would be 15/16x7 max if u're not lowering the car...

    if u're asking which one looks best...we're all have our own opinions, so i'd say go for the one that u like best
    Team Yum Cha Daily

    DBG - A New Revolution in Car Modding

  3. #3
    Member Array
    Join Date
    Nov 2007
    Location
    Penrith, nsw
    Car:
    Dc2r CW
    Quote Originally Posted by Sydsyd View Post
    EG stock rims are 14" steelies, and by law (in VIC and most states) u can increase the rolling diameter by 15mm...

    on most practical uses, u can use 15 or 16" rims (without sacrificing fuel economy)...on another note, i've seen ppl use 19s on EGs but they'd have to roll their guards...

    the rim offset for EGs are between 35-45...so it would be 15/16x7 max if u're not lowering the car...

    if u're asking which one looks best...we're all have our own opinions, so i'd say go for the one that u like best
    Yea i dont think i will be lowering the car since it looks pretty low already, do you think i could sneak in a 17" without mods?

  4. #4
    yes i have 17 inch on my eg and fits perfectly

  5. #5
    Member Array
    Join Date
    Nov 2007
    Location
    Penrith, nsw
    Car:
    Dc2r CW
    Well if 17s fit ive seen these lenso rims from tempetyres that i think would look pretty good heres a pic let me know what you guys think.





  6. #6

    Wink

    Quote Originally Posted by fabezzz View Post
    I was checking out this site urbanimport.com i think its a american site but they sell rota slipstream for pretty cheap and i was wondering what type of offset and size would be for my 93 EG

    Im looking for a 15" or 16" but not sure which 15x6.5, 15x7, 15x8, and the same in 16"s

    Just looking for a little advise on which fits/looks best or anyone else that has this rim on their civic.
    beware , u need to clarified the correct offset if u r planning to put in spoon calipers in future.

    Rota Slipstream.... a good start too for install spoon calipers
    Yo~~! Vtec go ! go ! go !

    Check this :

    Garage Sales ( Brand New items ) For sale : http://www.ozhonda.com/forum/showthread.php?t=83889

  7. #7
    Quote Originally Posted by fabezzz View Post
    Well if 17s fit ive seen these lenso rims from tempetyres that i think would look pretty good heres a pic let me know what you guys think.




    Lenso still have this wheel company ?

    how come they website is no more..??
    Yo~~! Vtec go ! go ! go !

    Check this :

    Garage Sales ( Brand New items ) For sale : http://www.ozhonda.com/forum/showthread.php?t=83889

  8. #8
    Member Array
    Join Date
    Dec 2007
    Location
    melbourne
    Car:
    eg5 si
    they kinda look like the works cr kai's!

    but yeaaa my friend had 17" and they fitted perfectly and, looked awsome as well

  9. #9
    Newcomer Array
    Join Date
    Nov 2007
    Location
    HILLZ DISTRICT NSW
    Car:
    93' Civic Hatchback
    i have 17'' on my eg fits great but have to change the tyres ever 12 months
    .

  10. #10
    Newcomer Array
    Join Date
    Oct 2007
    Location
    Dirty South, Melbourne
    Car:
    EG8 Civic
    ive got 18's..fit great but when im full locked to the left it scrapes its not lowered though but whenever ive got a full car look out cuz a slight bump makes the guards hit the tyre


    WTB: DRAGONBALL Z DVD'S (USED)

  11. #11
    Newcomer Array
    Join Date
    Dec 2006
    Location
    Melbourne
    Car:
    06 Euro Lux MT
    I've currently got 17s on mine... Car's lowered and i don't have any problems with scraping or bottoming out... only issue is i go through tyres about once a year, but i do drive a lot!

  12. #12
    Newcomer Array
    Join Date
    Oct 2007
    Location
    Dirty South, Melbourne
    Car:
    EG8 Civic
    Quote Originally Posted by CivicSi View Post
    I've currently got 17s on mine... Car's lowered and i don't have any problems with scraping or bottoming out... only issue is i go through tyres about once a year, but i do drive a lot!
    have u re done your suspension set up?


    WTB: DRAGONBALL Z DVD'S (USED)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.