Page 1 of 7 1234 ... LastLast
Results 1 to 12 of 81
  1. #1

    Interchangable Parts for EP3

    since parts are not readily available for the EP, we need to source parts from other hondas, should use this thread to list whats interchangeble and what is not so we can save a bit of time and $$. ill kick it off...

    format:
    the part the car is off - description of the part - does it fit the EP?

    EU3 - A-Pillar Garnish - DOESNT FIT EP3
    EU3 - Windshield - DOESNT FIT EP3
    EU3 - Headlights - FITS EP3
    EU3 - Door Solenoid - FITS EP3
    AP1/2 - Brake Pads - FITS EP3
    DC5/R - Air Filter - FITS EP3
    DC5R - Clutch Cylinder - FITS EP3
    DC5R - Fuel Filter - FITS EP3
    DC5R - Brake Rotor - FITS EP3
    DC5R - Brake Pads (non brembo) F&R - FITS EP3
    DC5R - Rear Sway Bar - FITS EP3
    DC5R - Brake Booster - DOESNT FIT EP3
    DC5/R - Steering Wheel - FITS EP3
    DC5/R - Fujitsubo Catback - DOESNT FIT EP3
    EK9 - Steering Wheel - FITS EP3
    Last edited by ekhybrid; 01-02-2010 at 11:23 PM.

  2. #2
    Member Array
    Join Date
    Oct 2006
    Location
    Perth
    Car:
    EP3R
    EU - door solenoid - it fits ep3

  3. #3
    Member Array
    Join Date
    Sep 2007
    Location
    Sydney
    Car:
    EP3R
    Quote Originally Posted by typercivic View Post
    EU - door solenoid - it fits ep3
    hey is that the solenoid that makes the door button go up and down ?? because my passenger door went and needs to b replaced *sigh*

    if it is u wouldnt happen to know how much it costs

    thanks mate


    Also great idea for a thread ! when i get ahold of some info ill diffinately post it

  4. #4
    Quote Originally Posted by SuperSteve View Post
    hey is that the solenoid that makes the door button go up and down ?? because my passenger door went and needs to b replaced *sigh*

    if it is u wouldnt happen to know how much it costs

    thanks mate


    Also great idea for a thread ! when i get ahold of some info ill diffinately post it
    thanks mate, i thought itd be heaps useful.
    i bought an EU garnish assuming itd fit the ep, look identical but the clips are in dif positions wtf

  5. #5
    Member Array
    Join Date
    Oct 2006
    Location
    Perth
    Car:
    EP3R
    Quote Originally Posted by SuperSteve View Post
    hey is that the solenoid that makes the door button go up and down ?? because my passenger door went and needs to b replaced *sigh*

    if it is u wouldnt happen to know how much it costs

    thanks mate
    yeh it's the actuator for the locking mechanism so when you press the remote it auto goes up and down. My passenger one was dead when the car came across, I spoke to some wreckers and Honda and apparently it's a common fault. Had to get a new one from honda as no wreckers had one as they get snapped up....$195.20 new which is a rip but what can you do.

    part number: 72155-S5A-003

  6. #6
    Member Array
    Join Date
    Nov 2003
    Location
    Tasmania
    Car:
    Honda Corolla G
    Im sure you can also have parts from DC5's that are swappable to the EP3.

  7. #7
    Member Array
    Join Date
    Feb 2004
    Location
    sydney
    Car:
    scooby doobydoo
    Quote Originally Posted by Chi View Post
    Im sure you can also have parts from DC5's that are swappable to the EP3.
    like rear strut brace
    EPisode3 : revenge of the civic

  8. #8
    Member Array
    Join Date
    Oct 2006
    Location
    Perth
    Car:
    EP3R
    brake rotors are the same and i think pads as well but have to confirm that one.

  9. #9
    Member Array
    Join Date
    Apr 2007
    Location
    Sydney
    Car:
    EP3
    $2000 is also interchangable with anything you want!

    Internal engine parts, clutch and most service parts (air, oil fuel etc) with the DC5.

    Yep pads are same as S2000/DC5R.

  10. #10
    Member Array
    Join Date
    Sep 2007
    Location
    Sydney
    Car:
    EP3R
    thanks typercivic. WOAH 200 bucks ! ! i think i might just go to supercheap and try 1 of there solenoid kits and see how that goes

  11. #11
    Member Array
    Join Date
    Oct 2006
    Location
    Perth
    Car:
    EP3R
    Front camber bolts and rear bushes are the same as DC5.

  12. #12
    Member Array
    Join Date
    Nov 2003
    Location
    Tasmania
    Car:
    Honda Corolla G
    You can use DC5R coilovers into EP3, but you need to shave the metal bushings a bit and use DC5R tie rod ends.

    You can also use JDM/AUDM DC5R rear sway bar, but only AUDM Front sway bar.

    Front and rear brake pads are the same as AUDM DC5R.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.