Results 1 to 11 of 11
  1. #1
    Member Array
    Join Date
    Jun 2007
    Location
    Victoria
    Car:
    Civic EG4 GLi

    DIY HSD coilover shock rebuild

    I have a set of HSD HS coilovers that are siezed up. No-one in town will touch them. So I was talking to some guys from work and the suggested because I can't get anything for them why not give a DIY rebuild a go.
    Is this possible? I'm concerned about the gas/hydraulic fluid in the shock mainly. Anything else related?

  2. #2
    Can't you go back to the retailer? I thought their ads all say rebuildable and they should be able to direct you someone who can.

    Another thing to consider, sometimes its cheaper to just buy a replacement tube than to rebuilt them.
    MFactory Competition Products

  3. #3
    Member Array
    Join Date
    Jun 2007
    Location
    Victoria
    Car:
    Civic EG4 GLi
    Quote Originally Posted by e240 View Post
    Can't you go back to the retailer? I thought their ads all say rebuildable and they should be able to direct you someone who can.

    Another thing to consider, sometimes its cheaper to just buy a replacement tube than to rebuilt them.
    Sorry, I bought them second hand, and no Suspension Specialist in my area will touch HSD.
    Im trying not to lose anymore money on them so I was just looking into a rebuild DIY stylez.

  4. #4
    similar boat as you for just getting advice and info about HSD coils.

    i tried emailing main office otomoto.com.au and honestly, they are the worst customer service you can get for aftermarket support on a product. about 3-4 emails and up to 12 weeks (since april) and got no response.

    what sussy placs in VIC did you try mate?

  5. #5
    Quote Originally Posted by Red_EG4 View Post
    Sorry, I bought them second hand, and no Suspension Specialist in my area will touch HSD.
    Im trying not to lose anymore money on them so I was just looking into a rebuild DIY stylez.
    As they're gas shocks, I'm guessing the cost of the equipment needed to service them would cost much more.

    But good luck
    MFactory Competition Products

  6. #6
    Member Array
    Join Date
    Jun 2007
    Location
    Victoria
    Car:
    Civic EG4 GLi
    Quote Originally Posted by googed View Post
    similar boat as you for just getting advice and info about HSD coils.

    i tried emailing main office otomoto.com.au and honestly, they are the worst customer service you can get for aftermarket support on a product. about 3-4 emails and up to 12 weeks (since april) and got no response.

    what sussy placs in VIC did you try mate?
    I am in Central Victoria. Just tried my local tyre/suspension places. To be honest I think there is only 2 places in town that would have any idea and one of them is Pedder's.
    Quote Originally Posted by e240 View Post
    As they're gas shocks, I'm guessing the cost of the equipment needed to service them would cost much more.

    But good luck
    What kind of equipment are we talking about?

  7. #7
    i'll let you know what happens with mine
    im going to a sussy place this weeek

    im sure somone here will touch them

  8. #8
    Member Array
    Join Date
    Nov 2004
    Location
    NSW
    Car:
    EG6ish
    Quote Originally Posted by Red_EG4 View Post
    I am in Central Victoria. Just tried my local tyre/suspension places. To be honest I think there is only 2 places in town that would have any idea and one of them is Pedder's.

    What kind of equipment are we talking about?
    probably equipment capable of re gassing shocks.... u cant just 'pour' gas in
    Ctrl + W



  9. #9
    Quote Originally Posted by aimre View Post
    probably equipment capable of re gassing shocks.... u cant just 'pour' gas in
    exactly.

    do not attempt to "rebuild" or take apart gas filled shocks yourself. they can explode or suddenly vent and cause bodily harm. They need to be captive in a machine to properly vent the gas and then take em aparrt etc.

    NOT a diy thing.

  10. #10
    Quote Originally Posted by Red_EG4 View Post
    I am in Central Victoria. Just tried my local tyre/suspension places. To be honest I think there is only 2 places in town that would have any idea and one of them is Pedder's.

    What kind of equipment are we talking about?
    I had the Ohlins on my bike rebuilt by this shop many moons ago

    BMW Motorcycles
    Parts Accessories Service
    Motohansa
    29 Clyde Street Rydalmere
    NSW 2116 Australia
    Phone 1300 557 889
    Fax 02 9638 5044

    But those were Ohlins, not..erm..haha.
    MFactory Competition Products

  11. #11
    Member Array
    Join Date
    Jun 2007
    Location
    Victoria
    Car:
    Civic EG4 GLi
    Quote Originally Posted by aimre View Post
    probably equipment capable of re gassing shocks.... u cant just 'pour' gas in
    Mmm I was going to try to find somewhere to have them regassed. I thought I might be able to clean up the valves etc myself if it was possible.

    Thanks for the help guys. Im gunna leave them alone.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.