Hey guys,

So I have a DC2, currently I'm not quite satisfied with my handling..

The rears keep on pig tailing and doesn't hold grip, so at some stages, I do spin out (or almost) and keep in mind I'm not taking 45degrees bend at a high speed.. Lol
I'm not too sure if my coilovers are causing the issue or alignment.. Thought I'll ask the forums and hope for some suspension guru to shine me some light!

Current suspension / handling mods

- skunk 2 pro series II coilovers (non damper adjustable)
- F7 rear LCA's
- ASR subframe
- 22mm rear DC2R sway bar
- hardrace RTA bushings
- hardrace toe arms
- hardrace caster bush
- pretty much all the bushes are already changed to hardrace
- hardrace front lower control arm bushings
- 16x8 enkei RPF1
- brand new 205/45 Federal RSR


I also don't have any camber kit.. If that makes a big difference?

So the only issue is how can I improve my handling and what can possibly cause the 'pig tailing'


Thanks in advance and I do apologize if this sort of question has already been asked before