Page 1 of 2 12 LastLast
Results 1 to 12 of 18
  1. #1
    Member Array
    Join Date
    Apr 2007
    Location
    Redcliffe, QLD
    Car:
    EG Civic

    Rubber Seal Around Windows

    Im selling my Civic now i lost my license so im prettying it up as much as i can before it goes.
    The seals around the windows and windscreen are all cracked and ones actually missing so i want to get a new set of them... Does anyone know where i should start looking? Because the few wreckers i called last week only had cracked and faded ones...

    Thanks
    Rhys

  2. #2
    Member Array
    Join Date
    Apr 2006
    Location
    Melbourne
    Car:
    EK>DC5R>S2K&JAZ
    if you real deal. go to honda. its going to cost quiet abit from my past experience with honda.

    however, i would suggest trying Clark Rubber first and have and look there. im sure they can make something for you and for a decent price too!

    good luck

  3. #3
    Member Array
    Join Date
    Apr 2007
    Location
    Redcliffe, QLD
    Car:
    EG Civic
    I'll try Clark Rubber then, would they really make them to fit?

  4. #4
    Member Array
    Join Date
    Apr 2006
    Location
    Melbourne
    Car:
    EG civic
    can't you buy it at honda and just incorporate the cost into the price for the civic? I'm sure buyers would appeal to new rubber seals.

  5. #5
    Member Array
    Join Date
    Jan 2007
    Location
    Sydney
    Car:
    EM1
    if i knew he jacked up the price lets say $200 for seals i would ask him too "waive" it as part of negotiations. better cost him $50 (prob less) at clark rubber rather than risk being set back whatever honda charge him

  6. #6
    Member Array
    Join Date
    Apr 2007
    Location
    Redcliffe, QLD
    Car:
    EG Civic
    Lol i keep thinking that i'll just drive down and see what Clark Rubber can do but ARGH!!!

    If you guys had the choice between selling a 92 civic, and buying a stock Prelude Si n 3 months...

    Or, keeping the civic and spending a grand or 2 on upgrades etc...

    Which would you choose?

  7. #7
    Member Array
    Join Date
    Jan 2007
    Location
    Sydney
    Car:
    EM1
    prelude for sure! Si = dohc engine, what would be your cash adjustment
    i doubt ud spent 2k on the 92 civic unless you got alot of damage on it.

    look a buying a used car is buying new problems right? thats the only thing id think of from stopping u getting a prelude. i mean you know whats wrong with your 92 civic

    make sure this prelude you gets in decent condition, you dont wanna be like me getting a civic about $2k cheaper than usual but know that the gearbox is on its way out ok granted i probably saved about $1500 but its a real pain in the ass
    Last edited by steve88; 29-04-2007 at 02:35 PM.

  8. #8
    Member Array
    Join Date
    Apr 2007
    Location
    Redcliffe, QLD
    Car:
    EG Civic
    Ok, well i payed $4500 for the civic with breeze engine...
    I put the new engine in for $1800

    It needs a respray which i can get for $600
    Then i want to do a leather interior etc (I can do that myself).. custom decal job on the side... spend a few hundred on audio... basically rice it up... then add a few performance things etc...

    A Prelude Si i could pick up for like
    $7-8grand if i go for over 200,000k's... theres one in the next suburb for $5200!

    Wats the 4WS like? lol...

    How much would i get for the civic you reckon, If it was sprayed...

  9. #9
    TRIPLE OG Array
    Join Date
    Aug 2004
    Location
    MEL/JPN
    Car:
    b18c crx/that's
    just get the seals from honda, they're generally still available for the older cars. some may require the dealer to get it in from japan which can take a couple weeks
    www.lozzz.com - car spotting, food and other random crap from Japan

  10. #10
    Member Array
    Join Date
    Aug 2006
    Location
    Sydney
    Car:
    97 Del Sol
    Damn! $600 for a respray? Thats very cheap. I would hazard a guess and say you would be cleaning up the overspray for years to come. LOL

  11. #11
    How much do the seals cost??

    Quote Originally Posted by panda[cRx] View Post
    just get the seals from honda, they're generally still available for the older cars. some may require the dealer to get it in from japan which can take a couple weeks

  12. #12
    Member Array
    Join Date
    Jul 2006
    Location
    JDM PARTS BRISBANE
    Car:
    EURO LUX
    i would keep the eg for sure !
    just do the things u said u were going to do the see if u are happy with it
    the 4ws on the prelude is a pain in the butt if u bump a kerb or damage a sensor it will cost u a arm and leg to fix
    it only aids u on slow cornering and for parking purposes

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.