Trust sandwich plate

[iced]

where is the sump plug on your motor?
angle to the side near the bottom or what?
if the sump itself will still be lower than the sender with adaptor attached to the sump bolt fitting then you wont have a problem with it getting a bashing

[Steer^Gimic]

12xP1.25 OIL ADAPTER


Temp. replaces oil pan drain plug
16400713 10.50
14xP1.25 OIL ADAPTER

Temp. replaces oil pan drain plug
16400714 10.50
18xP1.25 OIL ADAPTER


Temp. replaces oil pan drain plug
16400721 10.50
its one of those heheh think its the last one

thanks for the the tip vinh

[BlitZ]

thanks for the the tip vinh

Steer gimic... have u got also got the trsut snadwich plate?
Ive found a product needed to use the 1/8npt onto it
Let me know if thats what u need..

[BlitZ]

where is the sump plug on your motor?
angle to the side near the bottom or what?
if the sump itself will still be lower than the sender with adaptor attached to the sump bolt fitting then you wont have a problem with it getting a bashing

its just ugly and inconvenient when changing oil..

[iced]

less chance of dropping your nut into the pan
lol

[BlitZ]

less chance of dropping your nut into the pan
lol

its gonna be welded in man... the only thing i would drop in the pan is a piston.