Ingalls ETD

[Pumped]

Ive got the Ingalls ETD, i'll try adjusting it, might be set to harsh

[Suntzu]

I dont get "wheel hop" my launches are very smooth. Must be my skill+suspension tune+tyres.

[aaronng]

I dont get "wheel hop" my launches are very smooth. Must be my skill+suspension tune+tyres.

Probably the tyres, or maybe you are slipping the clutch more than us.

[EUR003act]

im only buying it for the bling

[aaronng]

im only buying it for the bling

Next thing to do would be to respray your rocker and intake manifold covers.

[EuroAccord13]

And put diamonds on your rims to make it more bling bling too...


I found the photos of the modifications I did to the Ingalls brackets.. I'll post it up soon!

[EUR003act]

Next thing to do would be to respray your rocker and intake manifold covers.

lol way ahead of you there - ordered the DC5R red rocker cover and spark plug cover last week

once everything is installed ill have to post pics too

[aaronng]

lol way ahead of you there - ordered the DC5R red rocker cover and spark plug cover last week

once everything is installed ill have to post pics too

Haha, you're much richer than me then. My EDFC costed much less than even just your rocker cover.

[EUR003act]

Haha, you're much richer than me then. My EDFC costed much less than even just your rocker cover.

lol ill be eating baked beans on toast for the next 3months ill tell you that much lol

quick question - to change the valve/rocker cover, i dont need to drain the oil or anything? just straight un bolt and swap over?

cheers

[aaronng]

lol ill be eating baked beans on toast for the next 3months ill tell you that much lol

quick question - to change the valve/rocker cover, i dont need to drain the oil or anything? just straight un bolt and swap over?

cheers

You don't need to drain the oil. But make sure that the gasket is still fine and get some RTV blue gasket sealant just in case you need it. You realise you have to remove the ignition coil packs too? Not sure if you have to remove the spark plugs. I'll check.

Edit: You don't need to remove the spark plugs, just the coil packs. Here are the instructions just in case:
http://img87.imageshack.us/img87/779/rockercoverub3.jpg

[EuroAccord13]

These are the modifications I made before I sprayed the brackets black to clear the pulley, ABS module, aircon lines and bonnet issues...

There are still issues with the bonnet lining but I cannot afford to grind anymore down...










The cut for the bracket that sits on the sussy tower is angled as well to clear the AC lines...

[Chris_F]

all of a sudden, the FEELS etd seems like a no brainer :P