im buying some 99-00 angel eyes off someone cheap cause one angel eye is a bit lazy and im gonna butcher it for parts (cause mines a 96-98 civic) to retrofit my headlights. so im just trying to sus out exactly how to fix it
H4, is a single bulb setup so therefore, when low beam is on, high beam is off and when high beam is on, low beam is off.
sory to hijack but i have double bulb setup where i have a different globe for high and low beam. ive recently converted them to single so when high beam is on they're both on. is there any harm in this?? i didnt think there was but your post worried me
sory to hijack but i have double bulb setup where i have a different globe for high and low beam. ive recently converted them to single so when high beam is on they're both on. is there any harm in this?? i didnt think there was but your post worried me
what single bulb is it?
sinlge H4 bulb, i wouldn't recommend doing this cos if both are on, its going to be ****en hot inside the buld and could/may damage things.
i wouldnt know i have never seen an angel eyes in my life. is it 2 bulbs? is it 1 bulb
i dotn even know what powers the projector or lights up the angel eye
ERR WTF. what globes.. angel eyes dont use bulbs.. they are LED.. and if its broken.. or dimm.. and it aint the power.. u need to replace it.. BIG JOB.. rather buy another set
shit you serious. i thought the rings just had a light source behind them that lit them up. it wouldnt be such a big job for me because im actually pulling apart the headlights, but i wouldnt know where to start to find the rings
Bookmarks