wiring up angel eyes

[XP02ED]

it isnt like the ones u buy from supercheap etc..

they dont use a LED which goes round the ring, its an actual circle LED... BUT im comparing this to my previous angel eyes..



I had fog lights which were the LED ur referring too.. and the US imported angel eyes.. which was a LED ring..

[steve88]

same shit as long as its hte same size like i care. what power source do they run, would it comes with appropriate resistors?

[XP02ED]

they ran of the existing line, no fuse, no relay... the fog lights ran of the battery,, wiring had the fuse for it already

[steve88]

if i can get some of those angel eye replacements at supercheap for cheap then its prob worth getting hte head lights

[XP02ED]

u'll have to replace all the LED's on the existing setup as it will differ on how it lights up

[steve88]

i dont mind doing that but are these angel eye LED's wire up the same way as existing ones?

[tiksie]

ehhh..

main beam n high beam is plug n play ..

parkers come with 2 sets of positives n 2 sets of negatives ..

and the blinkers use the OEM socket.

i just sliced off the parker plugs and wired the power in parallel and had 2 seperate grounds..(for one light .. total of 4 grounds for both)
it works fine, theres really no need for relays n all that mumbo jumbo :/

OEM parkers dont take much amperes anyway, it should already be regulated.

lol i didnt even solder mine :/
and my passenger side's wiring is so stuffed .. it comes so close to the power steering pump..

but oh well, goodluck anyway, which ever way you want to do it =]

in the end .. as long as it works .. its coolio

What do I do with the 4 wires ? 2 black and 2 red ?

[SaBReT00tH]

hey people,
just wondering with ebay angel eyes with projectors, they're basically retrofitted halogen housing right?

Does the beam pattern still get bent incorrectly because the housing was made for halogen, even if there is a projector lens there? or does the projector lens somehow fix this up?

[markoJEK1]

Hey guys, I have the ebay item projectors (halo angel eyes), Sabretooth The beam is normal and I havent had any problems with it, it is a true projector light and not a mock well the item that I got that is,

and for the wiring part, If anyone is interested I can take photos for you just pm me, I didnt wire mine up myself, I got an auto electrician to do it, I am about to replace the projects with OEM headlights once again also, so If you want to see the wiring let me know soon before I take them out.

[tiksie]

Do you have to take the front bar off to fit the angel lights ?

[XP02ED]

Do you have to take the front bar off to fit the angel lights ?

YES u do

[dahon]

hey guys,

ive fitted projectors to my ek civic and yes u gotta rewire your parks, i got a double contact socket for my signals for my park lights -5w for park 20w-ish for signals.
decided against angel eyes as ive heard they burn out and all that. Just got reflector rings and they seem fine. looks great.

what i want to know is for a 4 bulb setup, how do i get the wires set up for high beam turn on without the low beam bulb turning off - when the high beam switch is triggered to permanent on - not just temp (ie when you pull the lights towards you it clicks). even though i dont really use the highs that much anyways it still bugs me a little..