Disabling Check Light after IMM removed from ECU

[BlitZ]

Hi guys,
I got a second ECU whihc i want to use.

Its demobolised, but the check engine light is on solid. In addition,the car needs to be fully primed before it would start.

Anyone know how to fix this. There are instructionst bridge somethign somewhere.

ECU is a obd2b.

[dc2r_fAn]

Push the odometer reset button in, hold it, turn on the key. It will flash a few times then go off.

Disconnect the HOT side of the battery for a few seconds--then reconnect(will likely have to reset the radio stations, clock etc.)

To turn off the back up light you must go to the engine compartment. Open the fuse box and remove the back up fuse for 30 seconds. That will take out the check engine light.

look in your owners manuel on how to reset your light because when it comes time for the hondas to have there oil change they sometimes have a button underneith the dash on the drivers side