Page 1 of 2 12 LastLast
Results 1 to 12 of 15
  1. #1

    Calder park for the first time!!

    Hey guys, im going to calder park for the very first time this friday to see what my jdm dc2r runs on the 1/4. Just wondering if some of you guys can give me some helpful tips because i go. Like tyres pressure? Sussy setup? what rpms to launch at?

    Any helpful information would be appreciated


    cheers guy
    Last edited by dslt; 24-04-2008 at 06:09 PM.

  2. #2
    Member Array
    Join Date
    Aug 2003
    Location
    Sydney, Australia
    Car:
    '94 Civic VTi
    You kinda answered your own question.

    PS. Bench racing isnt any fun.
    [TNT] Team No Traction - Cos No Traction Is Underrated

    Two turbos, is better then one.

  3. #3
    Member Array
    Join Date
    Sep 2006
    Location
    Out in Nature
    Car:
    91 eg5 b16a
    Take a helmet!

  4. #4
    Member Array
    Join Date
    Apr 2005
    Location
    Melbourne
    Car:
    ( . )_( . )
    Isnt Calder Park no drags this month as Bobs fixing up the track or some other shit (prolly filling pot hole with all the dirt hes got around or making bigger dirt mounds)?

  5. #5
    Member Array
    Join Date
    Apr 2005
    Location
    Melbourne
    Car:
    ( . )_( . )
    yep its not on just checked....

    iMPORTANT MESSAGE to Drift & street drag competitors
    Due to major works and improvements to the Drag Strip, the Drift Practice and Legal Off Street Drag Racing events will not be held during the month of April, 2008.

    The next Legal Off Street Drag event will be held Friday night 2 May 2008 (weather permitting!).

    The next Drift Practice event - stay tuned for further notice!

  6. #6
    Quote Originally Posted by Weq View Post
    You kinda answered your own question.

    PS. Bench racing isnt any fun.

    and how did i do that?

  7. #7
    Member Array
    Join Date
    Feb 2004
    Location
    Templestowe
    Car:
    DC2R
    Coz u said ur friend did 14.0 flat in a stock jdm dc2r? but obviously u edited your post...
    bbs garage krew.
    Tuned by DYNODAVE
    Winton:
    1:42
    Wakefield: 1:12
    0-400m:
    13.8

  8. #8
    Member Array
    Join Date
    Sep 2006
    Location
    Out in Nature
    Car:
    91 eg5 b16a
    ahahahahahahahaha!

  9. #9
    are you guys even reading what this thread is about? SOME HELPFUL TIPS? like tyre pressure? Sussy setup? what rpm to launch at?

    I was stating out my mates time as an example of what times should i be getting. Obviously you guys cant read! If you guys have nothing better to post, then dont do it at all!!

  10. #10
    Account Disabled Array
    Join Date
    Sep 2004
    Location
    Sydney
    Car:
    CT9A
    what tyres? street tyres around 20psi

    Sussy setup generally for drag you want soft front and hard rear.

    RPM to launch you need to find whats best. For b18c we found 5k to be a sweet spot with sticky tyres.

  11. #11
    Member Array
    Join Date
    Dec 2005
    Location
    Point Cook, VIC
    Car:
    EK1 CXI
    as fatboyz39 said

    depending on what tyres your using around 18-20psi in the fronts and it doesnt hurt to run 40psi in the rears

    soften the front sussy but dont go too soft...i found that a little stiffer than soft on the fron worked better than fully soft and run your rears as hard as possible..............
    yeh and lunching is pretty much depending if your feathering/riding clutch off the line or dumping(which isnt that good) so just trial and error..........i usually drop it / launch it at 7000rpm.................

    p.s. good luck man, but thew next calder park is on the 2nd of may 2008
    Last edited by IEVAQ8; 26-04-2008 at 02:59 PM. Reason: adding notes

  12. #12
    sweet as thanks fatboy n ievaq8, will be heading out there next week. =)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.