Page 9 of 12 FirstFirst ... 6789101112 LastLast
Results 97 to 108 of 135
  1. #97
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    Quote Originally Posted by Crapdaz View Post
    how many runs did you get? include practice run?
    Practice?! Practice what? Your car is driven up by Adrian and then he does the dyno run. I wouldn't trust even myself to drive the car up onto the dyno. You get 3 runs and he prints out the best one. I got 4 runs because I asked him to run to cutoff (no extra power made). Thing about dynos is that they are only a scientifically valid comparison to other cars who run on that same day. Run different days and you can get different results.
    --------------------------------------
    Stocky CL9 - 1:17.2

  2. #98
    Member Array
    Join Date
    Sep 2005
    Location
    Gold Coast
    Car:
    JazzVibeS/Prado
    My stock auto made 111.8kw atw so it just goes to show how dyno's can vary but maybe I got the same friday special as Aaron

    On the same day just before me ChrisF got approx 130kw (from memory) with I/H/E and is a manual.
    Jazz: stock, K&N panel filter.
    120 Series Prado GXL Petrol: Pacemaker extractors, Dual 2 1/4" exhaust, 70 series MT STZ's, ARB non-winch bullbar, snorkel, Dimpled and slotted rotors.

  3. #99
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    Quote Originally Posted by BiLL|z0r View Post
    My stock auto made 111.8kw atw so it just goes to show how dyno's can vary but maybe I got the same friday special as Aaron

    On the same day just before me ChrisF got approx 130kw (from memory) with I/H/E and is a manual.
    Different dyno though. Your numbers can't be compared to mine, same as how mine can't be compared to EUR003act's. My number is only comparable to EuroAccord13's because we dyno'd at the same place. Even then, it is not 100% comparable because we did our dyno runs on different dates.
    --------------------------------------
    Stocky CL9 - 1:17.2

  4. #100
    Team YCD President Array
    Join Date
    Dec 2003
    Location
    Earth
    Car:
    Honbaru Yum Cha
    My car got built by machines that were way overdue in their service maintenance hence the lack of power......

    If there is enough interest in Melbourne, I can slap a dyno day in 2 weeks so everyone can have fun.
    146.8Kws @ Wheels Diesel CL9 Euro (SOLD), 2009 Honda VT Shadow, NC PRHT Mazda MX-5, Boxing SG Forester, Honda Civic Sport
    RenaultSport RS265 Trophy+

    Team Yum Cha Daily - The Dim Sum Revolution

    OzHonda's Public Relations Guru

  5. #101
    YES PLEASE NICK - I need to dyno the new car.

  6. #102
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    Just to keep with the topic, here is my dyno from last year.... ahh, those were fun times...

    Only mod was the Ghetto™ intake.

    Last edited by aaronng; 03-06-2008 at 05:13 PM.
    --------------------------------------
    Stocky CL9 - 1:17.2

  7. #103
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    when getting dyno'd whats the best print out to get? Power VS RPM, speed A/F etc?

    Sorry if i am noobish at this.
    vTeK 4-Life!
    FOR SALE: CL9

  8. #104
    Team YCD President Array
    Join Date
    Dec 2003
    Location
    Earth
    Car:
    Honbaru Yum Cha
    Depends on what you want to know really but in most cases, power relative to RPM is what the general public wants as it's easy to read, for an enthusiasts, they might want to know other variables such as MAP and A/F...
    146.8Kws @ Wheels Diesel CL9 Euro (SOLD), 2009 Honda VT Shadow, NC PRHT Mazda MX-5, Boxing SG Forester, Honda Civic Sport
    RenaultSport RS265 Trophy+

    Team Yum Cha Daily - The Dim Sum Revolution

    OzHonda's Public Relations Guru

  9. #105
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    Quote Originally Posted by EuroAccord13 View Post
    Depends on what you want to know really but in most cases, power relative to RPM is what the general public wants as it's easy to read, for an enthusiasts, they might want to know other variables such as MAP and A/F...
    Thanks EuroAccord.

    Will prob start off with Power vs RPM and i'll see from there on.
    vTeK 4-Life!
    FOR SALE: CL9

  10. #106
    Member Array
    Join Date
    Mar 2006
    Location
    Sydney
    Car:
    doorstop
    Why wont anyone listen to me about the K series knock sensor

    K pro actually disables its retard ability........

    Oh ...hang on..............i know
    I dont have euro written under my avatar & i dare venture into the euro forum,I'll have to find my way back to the poverty stricken forums,bye

    btw aarong,those AF's are shocking,i think the measuring device was wrong somehow

  11. #107
    Member Array
    Join Date
    Jan 2004
    Location
    Melbourne
    Car:
    ED Civic & 380GT
    Quote Originally Posted by CRXer View Post
    Why wont anyone listen to me about the K series knock sensor

    K pro actually disables its retard ability........

    Oh ...hang on..............i know
    I dont have euro written under my avatar & i dare venture into the euro forum,I'll have to find my way back to the poverty stricken forums,bye

    btw aarong,those AF's are shocking,i think the measuring device was wrong somehow
    I think you make a fair comment. I went to a dyno day where my almost stock euro (lightweight rims) was on the dyno compared to another stock euro. My euro dynoed almost 20% higher peak numbers than the other euro (both 6mt). Was my car 20% more powerful? No way. The Euro is temperamental with its power and I don't trust dyno numbers anyway. Real world rolling acceleration figures are far more convincing.

    The Euro is the only car I have owned that is like jekyl and hyde. Some days it will rev its **** off - other days it feels weak. I know temp, pressure all make a difference but the Euro seems to be up and down more than any other car I have driven.
    Last edited by yfin; 03-06-2008 at 08:15 PM.

  12. #108
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    dyno = approximation

    can never get the perfect numbers.
    vTeK 4-Life!
    FOR SALE: CL9

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.