Page 5 of 5 FirstFirst ... 2345
Results 49 to 60 of 60
  1. #49
    Member Array
    Join Date
    Nov 2005
    Location
    Adelaide
    Car:
    XR6 Turbo
    Do you have the dyno printouts for a comparison?
    ______________________



    B20VTEC Build Thread

  2. #50
    Member Array
    Join Date
    Jun 2007
    Location
    Sydney
    Car:
    CB7> EM1>MPS3
    still waiting for the OP's dyno graphs...
    I MISS VTEC.... BOOST is OVERATED lol

  3. #51
    Member Array
    Join Date
    Sep 2004
    Location
    Melb - SE
    Car:
    737 - Ventura Bus
    lol the OP is wasting your time.
    If you stand for nothing, you will fall for anything.

  4. #52
    Member Array
    Join Date
    Nov 2005
    Car:
    Evo IX > Euro '06
    well the original question from me was to find out if the RMF replicas on my car is the better option or should i install the toda headers I have, hence the start of the thread. Now its strayed into a Toda vs Race headers, Toda vs Big Brand USA header and Dyno Battle. I think we can all agree that Toda is a good header, and great for most combination of engine/exhaust setup, but if your chasing extra figures at the top with a custom setup and willing to pay $$$ than you have other options.

    Unfortunately I couldn't get a fair dyno comparison done because the RMF exhaust setup is welded onto the cat, and in turn, this uses a shorter catback setup.

    essentially I couldn't bolt on the same headers/cat/catback combos to do testing.
    Then REcustoms bailed on me. So I stayed home and bolted up the setup myself.

    But these are the facts after bolting on the Toda Headers/Race pipe/Mugen Twin loop. I will spare you my personal feelings of enjoyment.. and simply state a few facts:

    Road was Dry, It was last night, and it wasn't such a cold night. roughly about 14 degrees according to my weather app.

    - car briefly wheel spins in vtec in first gear than chirps (it used to just chirp)
    - Car briefly wheel spins in 2nd gear on Vtec than chirps. (used to just chirp. sometimes not)
    - Car chirps on transition to 3rd gear (never used to)
    - The transition used to be very subtle and low key you can just hear the crossover, but now vtec is engagement is that all too familiar "Baaaa" sound.
    nothing to look at.........

    EVO IX > Euro '06

  5. #53

  6. #54
    nah, seems to be acoustic dyno results only...
    B20VTEC - since 2002

  7. #55
    Member Array
    Join Date
    Nov 2005
    Car:
    Evo IX > Euro '06
    sorry to disappoint.The custom exhaust welded onto the RMF's didn't allow it.

    I will be geting a dyno to check AFR's later on, but it won't mean much.
    nothing to look at.........

    EVO IX > Euro '06

  8. #56
    Member Array
    Join Date
    Nov 2005
    Car:
    Evo IX > Euro '06
    Quote Originally Posted by tinkerbell View Post
    nah, seems to be acoustic dyno results only...
    but safe to say that the brief wheel spin in each gear in the DRY is a little more than acoustic.
    nothing to look at.........

    EVO IX > Euro '06

  9. #57
    Quote Originally Posted by hengis View Post
    sorry to disappoint.The custom exhaust welded onto the RMF's didn't allow it.
    you could maybe try the header/cat combo's and leave off the cat back?
    B20VTEC - since 2002

  10. #58
    Member Array
    Join Date
    Nov 2005
    Car:
    Evo IX > Euro '06
    well RMF+cat
    vs
    Toda+racepipe

    is not a fair comparison either is it?
    nothing to look at.........

    EVO IX > Euro '06

  11. #59
    Member Array
    Join Date
    Jan 2008
    Location
    Sydney
    Car:
    legtec @2psi
    What tyres are you using>? Hmmmmmm


  12. #60
    Member Array
    Join Date
    Jun 2007
    Location
    Sydney
    Car:
    CB7> EM1>MPS3
    Quote Originally Posted by hengis View Post
    but safe to say that the brief wheel spin in each gear in the DRY is a little more than acoustic.
    beg to differ, unless it was the same temp/ same road/ same tyres /same shift point / same launch technique when you had the RMF rep headers on... then i dont see how you can compare the power , by the amount of chirping you made with the tyres... that said.. you removed the cat , so some sort of gains would be expected.

    Nvrtheless, i would have picked the current setup you have over the old setup anyday.. way to loud it was. Good upgrade =)
    I MISS VTEC.... BOOST is OVERATED lol

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.