Page 1073 of 1384 FirstFirst ... 73573973102310631070107110721073107410751076108311231173 ... LastLast
Results 12,865 to 12,876 of 16607

Thread: EP3 Type R

  1. #12865
    Quote Originally Posted by UNA91 View Post
    Anyone know how to change the brakelight bulbs (Pre-FL)? Thinking of doing an LED conversion, but theres this red cap covering the socket from inside the boot. It seems pretty solid. :S
    Its pretty difficult to access the bulbs from the inside of the boot. I found it easier to just take off the whole light overall and replace it from there.

    You have to remove the bumper and mounting brackets in order to get out the lights and just go from there.

  2. #12866
    Member Array
    Join Date
    Aug 2011
    Location
    Brisbane
    Car:
    EP3R
    Silly me, theres was no bulb behind the red cap, didn't think the brake light shared the same bulb as when you turn your headlights on. :|

    Another question. Looking at getting race headers and am interested in the Kidd Racing header, however, as much as they claim to have excellent ground clearance, i'm still a little worried since I scrape my mid pipe every now and then. Anyone running RH have any clearance issues?
    Last edited by UNA91; 05-06-2012 at 10:49 PM.
    vtak + jrsc = bwwaaaahinneeeee

    IF GUNS don't kill people, people kill people does that mean that toasters don't toast toast, toast toast toast?

  3. #12867
    Quote Originally Posted by UNA91 View Post
    Silly me, theres was no bulb behind the red cap, didn't think the brake light shared the same bulb as when you turn your headlights on. :|

    Another question. Looking at getting race headers and am interested in the Kidd Racing header, however, as much as they claim to have excellent ground clearance, i'm still a little worried since I scrape my mid pipe every now and then. Anyone running RH have any clearance issues?
    Kiddracing headers have good clearence. My EP is pretty damn low, I'm now tucking about 1/2 an inch of tyre on 205/50/16's on the fronts. My mid pipe gets 99% of the scrappage. I've only managed to tear a small section of the heat wrap off the lowest point on the headers, haven't scrapped it yet.

  4. #12868
    Member Array
    Join Date
    Apr 2012
    Location
    Brisbane
    Car:
    '05 Civic
    So, I've replaced all of the lights I could get my hands on with LED's . . . The hatch trim isn't that bad, only broke one clip, and since there is about 48 in it, I didn't bother replacing it.

    Moving onto some more massive mods now . . . socks!

    WTF is with Mugen socks being $20-$30 a pop? Seriously, its a bloody tennis wristband with a logo on it! I'd really like to stay with the red (or orange even) theme with this car. Found some 'spoon' (not likely to be genuine, but surely this is a part you can afford to skimp on?) ones for under $10 a pair on fleabay here, but they are blue
    http://www.ebay.com.au/itm/120830957...84.m1423.l2649

    The only difference I can see between them and the Mugen ones is that they come with a rubber o-ring (which I can get anywhere for a few cents) and a massive price tag. Any tips?
    Last edited by -JC-; 06-06-2012 at 06:51 PM.

  5. #12869
    Member Array
    Join Date
    Jan 2012
    Location
    Japan
    Car:
    EP3 CTR
    Quote Originally Posted by -JC- View Post
    So, I've replaced all of the lights I could get my hands on with LED's . . . The hatch trim isn't that bad, only broke one clip, and since there is about 48 in it, I didn't bother replacing it.

    Moving onto some more massive mods now . . . socks!

    WTF is with Mugen socks being $20-$30 a pop? Seriously, its a bloody tennis wristband with a logo on it! I'd really like to stay with the red (or orange even) theme with this car. Found some 'spoon' (not likely to be genuine, but surely this is a part you can afford to skimp on?) ones for under $10 a pair on fleabay here, but they are blue
    http://www.ebay.com.au/itm/120830957...84.m1423.l2649

    The only difference I can see between them and the Mugen ones is that they come with a rubber o-ring (which I can get anywhere for a few cents) and a massive price tag. Any tips?
    lol yeah man you skimp out on these parts 100% or you can always use an old sock and make em yourself
    AKA: The Spaniard! +1 Rep me if you find my posts useful.

  6. #12870
    Member Array
    Join Date
    Apr 2012
    Location
    Brisbane
    Car:
    '05 Civic
    $5 imitation spoon socks it is!

  7. #12871
    Member Array
    Join Date
    Aug 2011
    Location
    Brisbane
    Car:
    EP3R
    I never understood the concept of those socks :S
    vtak + jrsc = bwwaaaahinneeeee

    IF GUNS don't kill people, people kill people does that mean that toasters don't toast toast, toast toast toast?

  8. #12872
    Member Array
    Join Date
    May 2010
    Location
    Melbourne, West
    Car:
    EP3
    To absorb the fluid in case of spillage under hard braking.

  9. #12873
    Also for hard parking

  10. #12874
    Member Array
    Join Date
    Aug 2011
    Location
    Brisbane
    Car:
    EP3R
    But if there was fluid spillage wouldn't that be a problem in the first place? :S
    vtak + jrsc = bwwaaaahinneeeee

    IF GUNS don't kill people, people kill people does that mean that toasters don't toast toast, toast toast toast?

  11. #12875
    Stops fluid from getting all over your engine bay :P

  12. #12876
    Member Array
    Join Date
    Apr 2012
    Location
    Brisbane
    Car:
    '05 Civic
    Quote Originally Posted by UNA91 View Post
    But if there was fluid spillage wouldn't that be a problem in the first place? :S
    Yeah it would be, but if you have a look here . . . http://www.ozhonda.com/forum/showthr...s.-Word./page5

    It's already eaten the paint off Trav's rocker cover before he had a chance to notice and rectify the problem. I'm going to fork out the $5 + postage to save having to repaint a rocker cover. I originally thought they were a hard park item only till I saw Trav's thread.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.