Results 1 to 12 of 226

Hybrid View

  1. #1
    Member Array
    Join Date
    Aug 2011
    Location
    Brisbane
    Car:
    EP3R
    Does the steering bracket and tie rod ends really improve the handling or geometry? I'm dropped a little less than a finger gap up front, similar to your height, and been using stock bracket and tie rod for ages. I keep coming back to wondering if I really need it...
    vtak + jrsc = bwwaaaahinneeeee

    IF GUNS don't kill people, people kill people does that mean that toasters don't toast toast, toast toast toast?

  2. #2
    Member Array
    Join Date
    Jan 2012
    Location
    Japan
    Car:
    EP3 CTR
    Quote Originally Posted by UNA91 View Post
    Does the steering bracket and tie rod ends really improve the handling or geometry? I'm dropped a little less than a finger gap up front, similar to your height, and been using stock bracket and tie rod for ages. I keep coming back to wondering if I really need it...
    I dont know about handling but I would say that it does improve geometry as it brings the tie rods higher and reduces the v angle you get from lowering it. So by having the angle close to stock it will reduce bump steer so it would play a role in handling.
    Open up your hood and take a look at the tie rods, if they are angled up its probably good at looking at getting the bracket or the roll centre adjusters to correct the problem. I think that one or the other will suffice tbh. I didnt take a look at my rod angles today after the drop but I'll see if I can get some pics tomorrow.
    AKA: The Spaniard! +1 Rep me if you find my posts useful.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.