Results 1 to 5 of 5
  1. #1
    Member Array
    Join Date
    Oct 2010
    Location
    Brisbane
    Car:
    Prelude ATTS

    Auto Electrician Brisbane

    Hey guys,

    My speedo stopped working while I was driving, does anyone know of any auto electricians in brisbane preferable southside that do a good job?

    Last one I went to wasmt great

  2. #2
    Member Array
    Join Date
    Mar 2011
    Location
    Brisbane Qld
    Car:
    2 Tonne Ek Tank
    Quote Originally Posted by manolii View Post
    Hey guys,

    My speedo stopped working while I was driving, does anyone know of any auto electricians in brisbane preferable southside that do a good job?

    Last one I went to wasmt great
    Wrong section mate.
    http://www.ozhonda.com/forum/forumdi...t-Where-to-Buy



    Did you get a check engine light when the cluster stopped?
    "I have no idols. I admire work, dedication and competence." - Ayrton Senna


  3. #3
    Member Array
    Join Date
    Oct 2010
    Location
    Brisbane
    Car:
    Prelude ATTS
    Quote Originally Posted by TbM View Post
    Wrong section mate.
    http://www.ozhonda.com/forum/forumdi...t-Where-to-Buy

    Did you get a check engine light when the cluster stopped?
    Thanks for that, wasnt sure which section. No check lights nothing

  4. #4
    Member Array
    Join Date
    Mar 2011
    Location
    Brisbane Qld
    Car:
    2 Tonne Ek Tank
    Quote Originally Posted by manolii View Post
    Thanks for that, wasnt sure which section. No check lights nothing
    If no cel occurred i would think the problem might be in the cluster, check the connections are still good ie the plugs on the cluster are on tight and the screws that hold the speedo in the housing are in tight.

    also if you know someone with same car as you you could swap in there cluster to see if it starts working, if so replace speedo/cluster. If not then id start looking at vss.
    "I have no idols. I admire work, dedication and competence." - Ayrton Senna


  5. #5
    Member Array
    Join Date
    Oct 2010
    Location
    Brisbane
    Car:
    Prelude ATTS
    Quote Originally Posted by TbM View Post
    If no cel occurred i would think the problem might be in the cluster, check the connections are still good ie the plugs on the cluster are on tight and the screws that hold the speedo in the housing are in tight.

    also if you know someone with same car as you you could swap in there cluster to see if it starts working, if so replace speedo/cluster. If not then id start looking at vss.
    I have checked all the connections and they are in firmly, I removed the battery. The only thing i noticed was these screws which werent in properly, they looked to short. kinda hard to explain but they didnt look like they reached if that makes sense.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.