Page 2 of 3 FirstFirst 123 LastLast
Results 13 to 24 of 33
  1. #13
    Member Array
    Join Date
    Feb 2012
    Location
    Northern Beaches
    Car:
    EG Civic
    another question.... i have all standard eg brakes at the moment, have noticed recently that sitting in traffic or at lights whatever, i push the pedal till its hard and then it kinda gives slowly and sinks down a bit more, havent been loosing any fluid, but any ideas as to how i can fix this....
    Wakefield Park PB: 1.15.6

  2. #14
    Member Array
    Join Date
    Sep 2007
    Location
    Australia
    Car:
    your mum
    Quote Originally Posted by .Dave View Post
    another question.... i have all standard eg brakes at the moment, have noticed recently that sitting in traffic or at lights whatever, i push the pedal till its hard and then it kinda gives slowly and sinks down a bit more, havent been loosing any fluid, but any ideas as to how i can fix this....

    two possibilities.

    1)losing pressure in the system, can be a leak somewhere like brake hoses

    2) lot of air in the system, you are pushing the brake fluids around as there is lot of air trap inside, have to bleed all the air out.

  3. #15
    Member Array
    Join Date
    Sep 2007
    Location
    liverpool
    Car:
    Civic Eg
    so could i use crv or vtir integra booster and bmc or just type r
    Like my POST? why not add it with a +REP point!

  4. #16
    Member Array
    Join Date
    Feb 2012
    Location
    Northern Beaches
    Car:
    EG Civic
    Quote Originally Posted by connorling View Post
    two possibilities.

    1)losing pressure in the system, can be a leak somewhere like brake hoses

    2) lot of air in the system, you are pushing the brake fluids around as there is lot of air trap inside, have to bleed all the air out.
    cheers, i bled it when i installed new pads and im sure there was no air... ill try it again to be sure...
    Wakefield Park PB: 1.15.6

  5. #17
    Member Array
    Join Date
    Oct 2006
    Location
    Melb
    Car:
    P1.5 460F/350R
    Quote Originally Posted by .Dave View Post
    another question.... i have all standard eg brakes at the moment, have noticed recently that sitting in traffic or at lights whatever, i push the pedal till its hard and then it kinda gives slowly and sinks down a bit more, havent been loosing any fluid, but any ideas as to how i can fix this....
    does it keep sinking?
    usually the bmc need replacing
    S P A M | W O R K S
    With our special rotational tires, it will allow you to drive very fast. - JK Tyre

  6. #18
    Member Array
    Join Date
    Sep 2007
    Location
    Australia
    Car:
    your mum
    Quote Originally Posted by .Dave View Post
    cheers, i bled it when i installed new pads and im sure there was no air... ill try it again to be sure...
    like i said, it happened to me, i even took out the bmc and booster and get professional clean and rebuild it too.
    and it still feel spongy.

    i replace the bmc and bb with BB4 items, it went so much better.

  7. #19
    Member Array
    Join Date
    Feb 2012
    Location
    Northern Beaches
    Car:
    EG Civic
    Quote Originally Posted by mocchi View Post
    does it keep sinking?
    usually the bmc need replacing
    yeah sinks a fair way.... cheers, ill get onto replacing it... need a bigger one anyway
    Wakefield Park PB: 1.15.6

  8. #20
    Banned Array
    Join Date
    Apr 2011
    Location
    Perth
    Car:
    B16EG-GD3-DC2
    LOL everyone forgot about OP

  9. #21
    Member Array
    Join Date
    Dec 2007
    Location
    Cave
    Car:
    civic
    ive also got the same issue.

    connorling - did u also change pv to 40/40?

    ive gota 96 itr bmc - it doesnt brake until the last 4cms of braking

  10. #22
    Banned Array
    Join Date
    Apr 2011
    Location
    Perth
    Car:
    B16EG-GD3-DC2
    how is your fluid level, and what booster?

  11. #23
    Member Array
    Join Date
    Dec 2007
    Location
    Cave
    Car:
    civic
    if ur talking to me:

    fluids are all good. booster is itr 96 spec.. no air in lines. bled twice

  12. #24
    Banned Array
    Join Date
    Apr 2011
    Location
    Perth
    Car:
    B16EG-GD3-DC2
    your pads wouldnt be worn, or sitting far from the disc surface?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.