Rubber Seal on door/window Replacing

[Frankie]

]Hi Guys,

I need to replace both sides of the seal in the below image as its been damaged from the sun. What's the name of this part? and has anyone replaced these before? if so how difficult is it?





Thanks

[curtis265]

easy to get out.

Also easy to just paint with a rattlecan

[stevo1210]

I ended up shaving all the black bits off on the EK back in the day.

[Frankie]

Yeah might shave it all off and spray it. but just wondering roughly how much they would cost?

[grifty]

about $10-20 for each side at wreckers, takes about 1 min to change.

I got a mint set from the wreckers for free lol

[Frankie]

How does the part come off?

[grifty]

you remove the plastic door pillar trim, held in by 3 screws.

Then wind the window down and use your hands to pull it off, it needs a little force but it comes out easy. Pull it upwards and towards the end you will need to slide it out a little.

[Frankie]

Where is this plastic door pillar trim, held in by 3 screws. next to the side mirror?

[grifty]

no on the other side, you can see it in the bottom left of your first photo