lowered springs for 1994-1997 Accord

[YBQ13T]

Hey all i'm just wondering how much you's have lowered your 1994-1997 Accords. I'm looking at doing 3 and a 1/2 inches in the front and 2 and a 1/4 this should give me a nice stance and work well with the custom kit. So if yas don't mind tell us ya drop height and how they drive cheers all.

[28RAG]

im on king lows, rides well but i want lower

[Dominik]

I'm on custom Kmacs, i measured it and its 3.5" drop all round. Bouncy as hell, but looks sweet :)
http://img.photobucket.com/albums/v257/dbloemhard/My%20Accord/DBC_130.jpg

[Spoon-Accord]

http://img.photobucket.com/albums/v216/spoon-accord/a7ff36e5.jpg

here's my previous ride.. with tannabe Super down procedeos
i duno bout the height.. but it was low..
not too low.. but enough to look schick

lolz

the ride is bumpy.. but u'll survive

Ken

[YBQ13T]

thanks all the problem i have with the rear is my big ass rear lip is about 8cm from the ground as is, so i think 21/4 will be enough. i'm low as now but my springs have been reset twice so they are way to soft the underside of the car hits the ground before the springs take the load. no good. will book her in for thursday ozzy does any height fitted for $390 on kmacs. does anywhere no a place cheaper then this?

[28RAG]

psst dont tell anyone but im just gonna cut mine this weekend

[b00std]

psst dont tell anyone but im just gonna cut mine this weekendlol

[b00std]

thanks all the problem i have with the rear is my big ass rear lip is about 8cm from the ground as is, so i think 21/4 will be enough. i'm low as now but my springs have been reset twice so they are way to soft the underside of the car hits the ground before the springs take the load. no good. will book her in for thursday ozzy does any height fitted for $390 on kmacs. does anywhere no a place cheaper then this?
any pics mate??

[YBQ13T]

psst dont tell anyone but im just gonna cut mine this weekend
hahahahaha nice work mate your secrets safe with me..... gold. As for pics there are links in my intro, in the intro threads.
cheers all it goes in friday will try and post some pics then.

[b00std]

hmmmm nice.. what would make it real pimp would be a set of bags!!

[poid]

get the Kmac's, they work well. And that price isnt too bad either. I had them make the springs about double the normal stiffness though...helped with bottoming out

[YBQ13T]

hmmmm nice.. what would make it real pimp would be a set of bags!!
hell yeah i'd love bags but a set installed and engineered is over $3500 thats just way to much for suspension at the moment, plus the problem of no where to put the tank and compressors due to boot full of audio.
And as for the springs i'm getting kmacs they will be stiff but not tooo stiff it still has to be cruizy. cheers all

[YBQ13T]

alright springs are done its hell low and has a tough stance will try and post some pics soon
cheers all

[razaman]

What shocks are you using with the drop?

And pics or it didn't happen:p

Raz

[28RAG]

yeah i wanna see some pics :P didnt end up chopping mine, ust gonna get the kit and bigger rims then lower to suit

[YBQ13T]

yeah i wanna see some pics :P didnt end up chopping mine, ust gonna get the kit and bigger rims then lower to suit
Yeah with bigger rims and a kit you wont need to touch ya springs it will be plenty low enough but kits for kords are so hard to find in Aus you will have to go custom. A for shocks i've still got my standards in and pics not yet but soon.