*** Official - What Did You Do To Your EG Civic Today? ***

[Glocker]

well it was a b16a afi gt35r turbo 186kw on 7.5 psi new setup is k24 afi gt35r should be all done by jan ish

What manifold u using?

[89lude]

What manifold u using?

afi manifold and by january he means january 2013 :P

[Glocker]

afi manifold and by january he means january 2013 :P

LOL!

Just got some eyelet bolts and eg hatchback rails for the sparco seats. looking at the rails it looks like a massive job to fab them up :(

[egb16b]

did this today stripped it for 2012 bigger and better plans
before
http://i405.photobucket.com/albums/pp136/divads_87/320653_240805012651180_231203773611304_705072_2135 922325_n.jpg
after
http://i405.photobucket.com/albums/pp136/divads_87/IMG_2284.jpg
a teaser whats going in
http://i405.photobucket.com/albums/pp136/divads_87/IMG_2288.jpg

gangsta shititt

[myztery]

Did a home job stretch ya tyres mofo
Lol...

[Egcivicduty]

**** it just take it out. i did it to my left side because it started scraping after a drive through the north side hills.

had to tear mine in half with my bare hands, on the side of the road in the rain after work, or I couldnt drive home lol
that day sucked

[impossi13le]

sold it :(

[Loagz]

5Char

[jeremydawg]

nice work man. nothin better than a well treated d15b. got any other mods?

[SuperJDM.]

My eg4 last year. Cypher Industries intake/ pod.

http://img4.imageshack.us/img4/5662/98805340.jpg (http://imageshack.us/photo/my-images/4/98805340.jpg/)

Latest pics taken today. Custom Genie 421 headers, oem strut bar and new filter. Also have a down swept magnaflow exhaust. Skunk2 sport shocks no pics though.

http://img9.imageshack.us/img9/2199/81654700.jpg (http://imageshack.us/photo/my-images/9/81654700.jpg/)

http://img832.imageshack.us/img832/345/59007595.jpg (http://imageshack.us/photo/my-images/832/59007595.jpg/)

http://img40.imageshack.us/img40/6889/10715626.jpg (http://imageshack.us/photo/my-images/40/10715626.jpg/)

http://img12.imageshack.us/img12/8149/88637742.jpg (http://imageshack.us/photo/my-images/12/88637742.jpg/)

The leads dont hold seal to well anymore so got new ones on order and should be here soon. +1 rep for Sumitomo they have been going strong since 1994

deserve another quote for epic D15B engine... Legendary... one of one hondas best engine.

please take care of the engine man... there is no other like this one.

[Loagz]

nice work man. nothin better than a well treated d15b. got any other mods?

Nah 5char

[GSi_PSi]

Dat deefufteenbee has struck again

[NeedVtec]

dat dere deefuff is a beaut!

[mocchi]

how come that d15b dont have vtak?
or does it?

[GSi_PSi]

Living in Big-Brother's Shadow

Honda's neglected hero,

the VTEC-D15B engine



The D15B engine http://asia.vtec.net/article/d15b/dohc.jpg
In the mid 1980s, Honda's top engine in the Civic was the DOHC ZC delivering 130ps and redlining at a high 7200rpm. This engine powered the top Honda Civic models; the EF6 & EF7 Civic/CRX Si. In 1989, Honda invented VTEC, implementing it first in the DA6 Integra RSi & XSi in April and followed by the EF8/EF9 CRX/Civic SiR towards the end of that year. Honda continuously refined VTEC and migrated it to other engines and one of the first benefactors was the D15B.
The D15B has always been in the shadow of its larger, more powerful 1.6l brothers. When the DOHC ZC was the top engine, the D15B came in both single and double carb'ed SOHC versions, the dual-carb version delivering as high as 105ps in the CRX 15X. When VTEC became available, two versions of VTEC D15Bs were developed for the EG-series (1991-1995) Civic. One is the well-knowned VTEC-E which delivered an incredible 20+km/l mileage. The other is the VTEC D15B, a power implementation. The VTEC D15B is a very significant engine variant because Honda used VTEC to make it possible to generate as much power as a DOHC design from its SOHC configuration. Thus the VTEC-D15B generates 130ps and redlines at 7200rpm, ably replacing the DOHC ZC design despite having 100cc less displacement and one cam-shaft less !




http://asia.vtec.net/article/d15b/

[prada21]

Nothing today cause of work.

But im attempting to change my brake cylinder/booster tomorrow, install my system back on and maybe clean my carpet

When i done the EFI conversion it got heaps dirty :(

Is changing the alternator belt easy? i have no experience with this?

[Loagz]

how come that d15b dont have vtak?
or does it? Nah its just the non vtec variant

[Egcivicduty]

Dont you have to take an engine mount off to change the belt?
I dunno..... just seem to remember something annoying
Or maybe it was timing belt, I've confused myself :(

and I didn't do anything to my civic today :(

[prada21]

I think you are thinking of timing belt.. its under that annoying cover..

Alternator belt I think I just need to take the alternator off to replace the belt =|

Sent from my GT-I9100 using Tapatalk

[myztery]

Trying to teach my missus in her eg civic cos it's the only manual car we have :(

Bye bye clutch....

[Benson]

Nice car Robert! Its looking really good

[myztery]

Nice car Robert! Its looking really good

Thanks man, I'll let you know when Kellogg's is on the menu....

[prada21]

No love anymore rob?
I've sent u a few msgs on facebook and texted u and u haven't responded =[
Makes me a sad panda.. lol

Sent from my GT-I9100 using Tapatalk

[myztery]

No love anymore rob?
I've sent u a few msgs on facebook and texted u and u haven't responded =[
Makes me a sad panda.. lol

Sent from my GT-I9100 using Tapatalk

Sorry mate as you can see I've been pretty flat out trying to get this car ready for the eoymeet,
Sorry bud

[prada21]

Tis all good man =]
Car looks hot =]

Sent from my GT-I9100 using Tapatalk

[prada21]

Brake cylinder is changed and oil dumped and oil filter changed :)

Decent work on my day off :)

Sent from my GT-I9100 using Tapatalk

[PGB]

Jealous Rob. Good to see it all together

Nothing to report except everytime I start to actually give a shit about a ride something goes wrong.
Got it all in primer ready to go. Health put it on hold, got that sorted and then some ****in dick reversed into the front of it.
I give up till after xmas. Need some snow to cool the rage lol

[89lude]

this thread is dead whats going on no one have eg's anymore?
did this today brake line tuck
http://i405.photobucket.com/albums/pp136/divads_87/IMG_2971.jpg
http://i405.photobucket.com/albums/pp136/divads_87/IMG_2972.jpg

[JPR28610]

looks good man, what happen to your prop valve?

[89lude]

its behind the fire wall

[NeedVtec]

changed my gear knob and vacuumed my car . that is all. needs exterior clean

[joeyybruh]

Bought a handheld steamer :) ! finally steamed my SR4 Recaro's but to be honest , didnt do much . i need to buy a cleaning agent that'll clean them but not destroy them . vacuumed the inside and also wiped down the dash with UV protectant.

Now with the Recaros back in :( awhh my eg is slightly slower LOOL damn heavy seats .

also washed the car with 4 bucks from the carwash ;) great day .

[Alvis]

Bought a handheld steamer :) ! finally steamed my SR4 Recaro's but to be honest , didnt do much . i need to buy a cleaning agent that'll clean them but not destroy them . vacuumed the inside and also wiped down the dash with UV protectant.

Now with the Recaros back in :( awhh my eg is slightly slower LOOL damn heavy seats .

also washed the car with 4 bucks from the carwash ;) great day .

No need to steam alcantara seats.

Ttry get hold of some upholstery cleaner from an upholstery shop and give them a wipe down with a microfibre cloth every 2 weeks (I use one to apply and one to go over it) and give them a wipe down. Then give them a hit with the vacuum cleaner with a soft brush attachment to 're-plush' the alcantara; and also to get rid of the 'crap' (eg sounds disgusting but dead skin, dust, pollutants from air when you drive with your windows down etc etc) that builds up on them every day and you should be fine :)

[joeyybruh]

No need to steam alcantara seats.

Ttry get hold of some upholstery cleaner from an upholstery shop and give them a wipe down with a microfibre cloth every 2 weeks (I use one to apply and one to go over it) and give them a wipe down. Then give them a hit with the vacuum cleaner with a soft brush attachment to 're-plush' the alcantara; and also to get rid of the 'crap' (eg sounds disgusting but dead skin, dust, pollutants from air when you drive with your windows down etc etc) that builds up on them every day and you should be fine :)

yeah i was thinking of getting upholstery shit to give them a proper clean . their still in good condition but i wanna act on them early before stains become .. permanently stained !
thanks for the advice , i vacuum them every week to try stop dust build up .

only thing that kills it the most is .

the rain .

[dorikin]

I need to clean my Recaros too. I remember reading a good write-up about it, I'll try and find it

[Alvis]

I need to clean my Recaros too. I remember reading a good write-up about it, I'll try and find it

http://www.ozhonda.com/forum/showthread.php?132423-Restoring-Recaro-SR3-Bucket-seat/page2

;) could be others out there too...

[Alvis]

yeah i was thinking of getting upholstery shit to give them a proper clean . their still in good condition but i wanna act on them early before stains become .. permanently stained !
thanks for the advice , i vacuum them every week to try stop dust build up .

only thing that kills it the most is .

the rain .

Yeh but don't get that foaming shit rubbish for alcantara I don't think the condition of them would be that bad! Plus I've seen a guy use that one on his.. think it was a VW Jetta or something... and he totally f*cked up the alcantara and the company wouldn't reimburse him because it said on the pack to try in a small area first before applying to seats incase alcantara went funny. Ouch.

Haha, keep your windows shut! LOL.

Funny because I hate driving with my windows up...even when it is raining! I just leave the back ones open a touch if it's not too bad hehe ;)

[dorikin]

lol thats my old thread, but that was about rebuilding Recaros with new foam and trims

[dorikin]

Here it is, read this thread http://honda-tech.com/showthread.php?t=2821700

this dude had a set of Yellow, Red and Black SR3's that he cleaned. Looks mint

[Alvis]

lol thats my old thread, but that was about rebuilding Recaros with new foam and trims

Yeh I saved that one in my favourites lol ;)

[89lude]

looks like ill be massaging the rear guards
http://i405.photobucket.com/albums/pp136/divads_87/IMG_2983.jpg
http://i405.photobucket.com/albums/pp136/divads_87/IMG_2986.jpg

[VT3C]

How are the fronts Anthony?

Too hot to do too much.. fitted EG6 plastic headlights but got carried away detailing the chassis with all the front end apart.
Surprised how much lighter the plastc were versus oem glass lights but i forgot to weigh the eg6 lights before i put them on..and with the H4H bulbs MUCH better than the stock lights.
Slapped on some rice, PWJDM fender bolts, battery tie, tow ring, shift boot and new bolts for my dizzy so it doesnt fall out again lol.

[nigs]

David, guard rolling/flaring weekend? :p
My fronts still need to be done, I've been so slack.

[89lude]

How are the fronts Anthony?

Too hot to do too much.. fitted EG6 plastic headlights but got carried away detailing the chassis with all the front end apart.
Surprised how much lighter the plastc were versus oem glass lights but i forgot to weigh the eg6 lights before i put them on..and with the H4H bulbs MUCH better than the stock lights.
Slapped on some rice, PWJDM fender bolts, battery tie, tow ring, shift boot and new bolts for my dizzy so it doesnt fall out again lol.

Fronts will be fine, he's got j's racing fenders bro.

[89lude]

lol nigs anytime ill do it for you i already did mine i rolled and pulled it out lipped it whatever you wanna call it ill be able to 215 easy on rears front 225 easier as the j's fenders have heaps of clearance some pics
http://i405.photobucket.com/albums/pp136/divads_87/IMG_3254.jpg
http://i405.photobucket.com/albums/pp136/divads_87/IMG_3257.jpg
thats with 205 50 15 so heaps more room for tyres
http://i405.photobucket.com/albums/pp136/divads_87/IMG_3265.jpg

[JPR28610]

tuck my hid wires in my fenders. they were everywhere, messy!

http://farm8.staticflickr.com/7145/6617616051_1cc7cd0d2e.jpg (http://www.flickr.com/photos/73319195@N02/6617616051/)
IMG_0074 (http://www.flickr.com/photos/73319195@N02/6617616051/) by mr_rayyy (http://www.flickr.com/people/73319195@N02/), on Flickr

[kj9438]

i install a spoon front lip and fix the front light

[VT3C]

am I the only person on OZH to be running my bumper support beam ? HAHAHA

I know it weighs over 10KG's but if you guys have a frontal impact bye bye chassis !

[Red_EG4]

am I the only person on OZH to be running my bumper support beam ? HAHAHA

I know it weighs over 10KG's but if you guys have a frontal impact bye bye chassis !

I certainly have mine in there and I wouldn't even consider removing it.

[charliebrown]

Stupid rear swaybar being an ass while im trying to put in my coilovers. And now i can't wind them any shorter cos the cspanner won't fit, the rotor heat shield thing is in the way -_-. makes me wonder how some people can get their ride slammed when they can't even fit their hand in between the rotor and top of the arch.

Car started three wheeling on flat surface as well?

[viinnh]

maybe take your coils off the car

[charliebrown]

I can't get the LCA up high enough to bolt onto the coils if i do it that way. Oh and then also there's the issue of not being able to fit the damn wheel up in the arch to screw them on. FFFFFUUUUUUUUUUUUUUU--------------------

[jdmEG5]

Use a jack and jack up the lca

[charliebrown]

Got all 4 in, rear left and rear right are same height but for some reason front left is 1cm lower than front right with the same thread length.

[89lude]

shaved bay more and painted it
http://i405.photobucket.com/albums/pp136/divads_87/IMG_3332.jpg
http://i405.photobucket.com/albums/pp136/divads_87/IMG_3349.jpg

[sebtoombs]

Got all 4 in, rear left and rear right are same height but for some reason front left is 1cm lower than front right with the same thread length.

I have the exact same issue. I imagine it comes down to small differences in parts/tolerancing between the two sides. Just measure hub to guard and you'll be fine. My mate was having the same problem with his gtr too.

In other news, I adjusted the valve clearances on my poor old d15 (340000ks) runs a load better. Recommend this to anyone who hasn't had it done in the last 50-100000 ks

[charliebrown]

Got a good DIY for valve clearances?

[charliebrown]

Took it for petrol, scrubbing hard on all 4 corners. Only time it's not making sounds is driving straight on a perfectly smooth road.
Was gonna get the rears rolled and raise the front half an inch. Will this solve my problems ya think?

http://img846.imageshack.us/img846/825/20120107122238.jpg

http://img521.imageshack.us/img521/4658/20120107122254.jpg

Sitting still, the tyre is about 5mm from the guard. Thought coilovers would be stiff enough so that they wouldn't have much travel

[Bludger]

Got a good DIY for valve clearances?
I can do it for you, along with the keyless entry, hurry up though, I'm not here forever

[charliebrown]

When ya free bro?

[Bludger]

it varies, call me to book in a cavity search.

[89lude]

i think if you roll the front and rear you shouldnt have any scrubbing issues at that height.

[charliebrown]

I had a look and it seems the front it's scrubbing on the fender lining not the actual guard. Might try and sand it down or cut it a bit, don't really wanna take it all out.

The point of it is to stop dirt/water splashing into your engine bay and to protect the wiring/loom shit?

[89lude]

dropped this in
http://i405.photobucket.com/albums/pp136/divads_87/IMG_3363.jpg

[JPR28610]

fark man looking sexy

[patchwick]

today.. woke up...drove car to work and back...took a picture ..end! :)

http://i8.photobucket.com/albums/a8/patchwick/IMG_6199-1.jpg

[PGB]

I had a look and it seems the front it's scrubbing on the fender lining not the actual guard. Might try and sand it down or cut it a bit, don't really wanna take it all out.

The point of it is to stop dirt/water splashing into your engine bay and to protect the wiring/loom shit?

Ideally leave them in whenever possible. I don't and rarely have but you probably look after your car better than I do lol and they are there for a purpose. I also think the car as a whole looks neater when they're on. Ive never had loom issues without them myself although on cars Ive owned in the past that weren't shy of a dirt road the stray rocks can knock out high spots on your fenders. Can also easily happen with road use.
One method Ive used in the past is sourcing liners from another car with suitable concave shape somewhere in its design. Cut the problem area out on Car A making allowance for the concave shape from Car B to fit. Keep all the cuts clean, even both sides,well finished off with a 20mm overlap. Throw in around 4-6 pop rivets with a little Sikaflex on the faces that meet up to seal them. I used plastic rivets but aluminium should be fine if you want to paint them. Done correctly you'll have a nice gap and no more scrubbing. If done right it can be a pain. If done roughly, well your probably just better off ripping them out lol I wouldn't do it again but I was pretty full on with the car I did it too and it worked a treat.

All that being said have you had the wheel off and looked around the chassis? You'll see patches of bare metal if it is scrubbing in there as mine is.

The green machine is well over the top. Kudos 89lude. Makes me want to dig into my pockets for just..one...more ...build when I see work like that lol

[friski]

Tried to install my boss kit, FAIL :(

They sent me the wrong one, will have to wait for the right one

[iceey]

Just purchased my new 94 Eh9 honda civic =]

removed the 17" chromies put steelies back on
put a chucked in a pod filter
removed passenger 4 point harness

[white_ep3_civic]

cleaning up my EG

Painted my rims metallic gun metal grey
Painted the rocker cover
Installed a head unit

[charliebrown]

Anyone know what size tyres/wheels these are? looks like a bit of stretch on the red one?

http://i174.photobucket.com/albums/w93/FeLLiPh3/EGs/EG2/civic_eg6_7.jpg

http://i174.photobucket.com/albums/w93/FeLLiPh3/EGs/EG2/civic_eg6_10.jpg

http://i174.photobucket.com/albums/w93/FeLLiPh3/EGs/EG2/car8-2.jpg

[viinnh]

probs 195/40/16 ? or 185

[hmetro24]

http://i174.photobucket.com/albums/w93/FeLLiPh3/EGs/EG2/civic_eg6_7.jpg

http://i174.photobucket.com/albums/w93/FeLLiPh3/EGs/EG2/civic_eg6_10.jpg


Which red is this? Any 1

[charliebrown]

probs 195/40/16 ? or 185

I think it's either 195/45/16 or 205/40/16 by how much it fills out the guards (horizontally). But the red one has some stretch? Afaik a 195 on 7 width wont look like that

[viinnh]

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/199336_1766373572703_1640077132_1688564_3681257_n. jpg
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/200305_1766372732682_1640077132_1688562_2802808_n. jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/206318_1796861774889_1640077132_1731291_3154225_n. jpg
these were on my old eg, 205/45/16 x 7

so most likely the ones on the red ones are 195/45/16

[vtecing]

http://img213.imageshack.us/img213/6893/img0615.png

[2MPRS]

got bored so I thought I would carbon wrap the boot roof and bonnet didnt turn out to bad i guess
http://i44.tinypic.com/5d06ft.jpg

[Machew]

Bought one.

[vtecing]

what wheels are they

[Machew]

To be honest I dont know what wheels they are. Previous owner put them on, and I havn't had a really close look at them.

[MIKO_OL]

Doesn't look to familiar.

[cuppa]

Chucked in the recaro seat and sri, lmao need new wheels.

[charliebrown]

Can't decide between spoon cf rep or JDM SiR 1 piece wing :/

what ya reckon?

[EG8 CIVIC]

sir! ftw

[Civic-Noob]

Fist time poster long time viewer, I brought this car about 3 months ago and it was a peice of shit - i have to date installed new side mirrors, King Springs, new exaust, Tail lights, CRX rims that i brought off gumtree, Cleaned the whole interior but it just isn't up to my standards and im going to have to replace. Took off the Parking assist Bumper rubber things - next to come Window trims, HEadlights, carpet, front seats, dash and many more things - will post more pics in the near future (sorry for the bad quility)

21071

[zhong]

http://i174.photobucket.com/albums/w93/FeLLiPh3/EGs/EG2/civic_eg6_10.jpg

Anyone know what exhaust this is? FHOT!

[sebtoombs]

I did this:
http://i1129.photobucket.com/albums/m506/seb_1212/Civic/IMAG0267.jpg

[mocchi]

what is that red tape shit?
good job b16a

how much b16 cost these days?

inb4catpic

[u mad?]

how much does b16 worth this day

[dorikin]

lmzo I remember that

[riruiz_88]

what is that red tape shit?

he might be getting ready to get the engine out?

[Bludger]

what is that red tape shit?
good job b16a

how much b16 cost these days?

inb4catpic
need one?

got a nice one, swap your b18?

[SuperJDM.]

lol @ these nubs talking about B series swapping. grow some balls and do a D15 swap

[mocchi]

need one?

got a nice one, swap your b18?

what? why would i want to do that? phuc dat.

you need to offer me d15b at least.

today i sanded the bonnet getting ready for paint.
still need that rear boot to buy.

[dorikin]

Fixed my slow power windows

http://www.ozhonda.com/forum/showthread.php?161111-HOW-TO-Fix-Your-Slow-or-Mis-aligned-Power-Windows-%28EG-Civic%29&p=3253453#post3253453

[nigs]

Sourced a VTEC motor for my EG.
Manifold is getting made up for the GT2871R.

Should be a K killa!!

http://i69.photobucket.com/albums/i55/vteclol/new%20egg/2012-02-23205033.jpg
http://i69.photobucket.com/albums/i55/vteclol/new%20egg/2012-02-23205050.jpg

[GSi_PSi]

Sourced a VTEC motor for my EG.
Manifold is getting made up for the GT2871R.

Should be a K killa!!

http://i69.photobucket.com/albums/i55/vteclol/new%20egg/2012-02-23205033.jpg
http://i69.photobucket.com/albums/i55/vteclol/new%20egg/2012-02-23205050.jpg


mehh no d15b no care

[SuperJDM.]

Sourced a VTEC motor for my EG.
Manifold is getting made up for the GT2871R.

Should be a K killa!!

http://i69.photobucket.com/albums/i55/vteclol/new%20egg/2012-02-23205033.jpg
http://i69.photobucket.com/albums/i55/vteclol/new%20egg/2012-02-23205050.jpg

not gonna kill shit if its not a D15B

[Temp3st]

Sold it

[na-118]

http://img17.imageshack.us/img17/7117/img9791e.jpg (http://imageshack.us/photo/my-images/17/img9791e.jpg/)

took a pic of it

[GSi_PSi]

that looks hot sam!

[na-118]

thanks sam, rego within a few weeks!

[sebtoombs]

what is that red tape shit?
good job b16a

how much b16 cost these days?

inb4catpic

just went in when i took that.

[Bludger]

would like to see irl sam.

[VT3C]

http://img17.imageshack.us/img17/7117/img9791e.jpg (http://imageshack.us/photo/my-images/17/img9791e.jpg/)


nice wheel but what's with all the yellow stripes/tape ? cant you tell which way your wheel is meant to point ? ruins a beautiful wheel IMO.

[na-118]

that's how the steering wheel is. it's a fake item from bangkok i purchased when i was over there. how can't you tell which way it points?

[white_ep3_civic]

What gear shifter is that?

[89lude]

What gear shifter is that?

fast line

[Bludger]

fast line
Are they really that effective?

[na-118]

not sure, i only bought it for rice,

[Loagz]

Changed oil to 10w40/ replaced oil filter and fuel filter too.

[EKVTIR-T]

Chrome ones with blue l.e.d man

[PGB]

Chrome ones with blue l.e.d man
:zip:
I had a set of anodised jets a few years back but even Google says they don't exist anymore lol. They were easily blocked and pretty useless after a while but the looked pretty sweet.

OT Changed the fluids then fecked it :o
I did however finish restoring my Om16's last week and its now got a full set of matching rims for the first time in god knows how long. Was planning on buying my paint this week but today's events pretty much put that off till next week :(

[mocchi]

not sure, i only bought it for rice,

cooked nicely i must say

[57U-00]

wow my old thread that i started almost 2 years ago is still running! WOOT! lol...

[shepparton]

wow my old thread that i started almost 2 years ago is still running! WOOT! lol...

should change the topic to after 2 years what did do to your eg ?

[VT3C]

OK, I know.. it's an EF.. but i couldnt find a thread for what did you do to your EF today HAHA

Refurbished Valve cover :)

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/418061_10150575505347066_509717065_9301344_1970609 210_n.jpg

[myztery]

Fixed up my big brake upgrade :( 2 1/2 days of research days off and so on, finally figured that if you run to big of a caliper your pedal travel is going to be further lol

[57U-00]

EG got written off about 16 months ago due to hail damage... since then i've had an AE102R Corolla, Subaru Sherpa, Suzuki Sierra and a Nissan Skyline GTS-T and now back in a civic again... looked for an EG but hard to find good cleans ones - was easy about 6 months ago...

[Bludger]

OK, I know.. it's an EF.. but i couldnt find a thread for what did you do to your EF today HAHA

Refurbished Valve cover :)

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/418061_10150575505347066_509717065_9301344_1970609 210_n.jpg
good job. looks very nice.

you running stock ECU? looks like OBD0 still

[dorikin]

I swapped my valve cover today too. Damn I should've went wrinkle black, red looks too orangey lol


http://img96.imageshack.us/img96/5048/img1258fp.jpg

[VT3C]

good job. looks very nice.

you running stock ECU? looks like OBD0 still
Thanks man, is all in the prep.. degreased, sanded then washed twice withwax and solvent remover before painting, then left it to bake in the sun on 36 degree day over concrete.

Yeah all stock, obd0.. ecu is socketted but just running stock program.

Red valve cover looks good, when in engine bay it wont look so bright.. good job on the masking og the plug holes etc, i was lazy n just painted the lot minus the oil filler hole and the underside obviously.

[sebtoombs]

Wired up VTEC in my B16A2 EG swap. Oh yes yes yes.

[Loagz]

Installed NGK ignition leads to replace the stock ones. Also bought new genuine Eg front and rear mud flaps

[Drifter995]

Thought about it.. Poor banana car :(
Rest in currentlybentbutstillalive peace.

[VT3C]

Installed NGK ignition leads to replace the stock ones.

any noticable difference ? the NGK leads look really good for the price.. I actually felt the difference over stock when i changed to spoon leads but i need new leadsfor the EF9 but dont want to spend $400 on spoon items..

[Loagz]

any noticable difference ? the NGK leads look really good for the price.. I actually felt the difference over stock when i changed to spoon leads but i need new leadsfor the EF9 but dont want to spend $400 on spoon items..

Well the stock leads I had on were quite old.. so the difference I've found is how well the car turns on and runs, its so dam smooth like new. It used to take a few cranks and be a touch rough. For the price though you cant really go wrong.. This is also paired with new NGK plugs.

[vinhy]

sprayed my interior

http://img718.imageshack.us/img718/1508/dsc0010vc.jpg

[VT3C]

Well the stock leads I had on were quite old.. so the difference I've found is how well the car turns on and runs, its so dam smooth like new. It used to take a few cranks and be a touch rough. For the price though you cant really go wrong.. This is also paired with new NGK plugs.

interesting.. my EF9 cranks over a few times to start in the mornings - my EG is one click VROOM.
do you have a linky link for those ? Thanks !

[Loagz]

interesting.. my EF9 cranks over a few times to start in the mornings - my EG is one click VROOM.
do you have a linky link for those ? Thanks !

I got the leads from a local Veals @ mates rates $87, they retail at $120. As for the NGK plugs I got them off ebayUS since they are Iridium :thumbsup:

[Egxris]

Installed my new set of Accel 8mm Thundersport 300 leads.$40 delivered from the states. and my J's Racing Carbon intake duct for the front bar.

[vtec_cpu]

sprayed my interior

http://img718.imageshack.us/img718/1508/dsc0010vc.jpg

Nice work Vinhy, love the color!

[VT3C]

Thanks for the info and links guys - will look at some new leads me thinks.

did a FAIL on the weekend, thought I was rad getting a brand new OEM Type R Throttle Cable to do a tucked style under the IM.. but stoopid idiot forgot the US was LHD so the cable is WAY too short :(

[na-118]

brother, if you want to do a throttle cable tuck use a ek one, i did it on the weekend

[VT3C]

brother, if you want to do a throttle cable tuck use a ek one, i did it on the weekend

I thought i was :( checked pics 100 times to make sure it was the shorty one and blehh completely forgot US is LHD..

so AUS spec CXi cable will do the job ? thanks for the heads up ! anyone want a new stumpy cable for a LHD conversion ? LOL.

[na-118]

yeas it will do the job, if you require pics please let me know, dont pay more then 10 bucks for a cable,

[Bludger]

I have dc2 vtir one, that's pretty short, will it work for you?

[Loagz]

Installed my overnight parts from Japan.. well the rears at least, fronts will go on when I can paint the skirts a fresh coat of black


http://img403.imageshack.us/img403/8907/49422761.jpg (http://imageshack.us/photo/my-images/403/49422761.jpg/)

[NeedVtec]

how much for the set of 4 mun if you dont mind me asking? can pm me if you want

oh and where did you get them from?

[charliebrown]

how much for the set of 4 mun if you dont mind me asking? can pm me if you want

oh and where did you get them from?

$110USD for these bro

http://www.ebay.com/itm/New-OEM-Genuine-Honda-92-95-Civic-3Dr-Si-VX-CX-EG6-D16Z6-Mud-Flaps-Splash-Guards-/130653298907?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3ACivic&hash=item1e6b8b20db&vxp=mtr#ht_2570wt_929

[Bludger]

CB knows, I bought a mint set off him, good price.

thanks CB.auto, great service

[VT3C]

I have dc2 vtir one, that's pretty short, will it work for you?

any chance you can Measure it for me Bludger ? i was thinking the VTiR cable might be the best bet..

[Loagz]

$110USD for these bro

http://www.ebay.com/itm/New-OEM-Genuine-Honda-92-95-Civic-3Dr-Si-VX-CX-EG6-D16Z6-Mud-Flaps-Splash-Guards-/130653298907?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3ACivic&hash=item1e6b8b20db&vxp=mtr#ht_2570wt_929

Yep they are the ones! Was good because I got a few other parts and they combined the postage which saved 20 bucks

[na-118]

install oem mudflaps to eg hatch
paint stripped plus wire wheel b series rocker cover, waiting for 2 -10an bungs to arrive to be welded on cover for catch can setup.
will be spraying rocker cover metallic bronze!

[Glocker]

http://img254.imageshack.us/img254/6560/img1781j.jpg

mmmmmmm

[shepparton]

slowly prep for my next wsid .. :(

removed motor last weeknd

http://img189.imageshack.us/img189/7921/motorok.jpg (http://imageshack.us/photo/my-images/189/motorok.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

shave the block for more shaft clearance

http://img208.imageshack.us/img208/5083/blockok.jpg (http://imageshack.us/photo/my-images/208/blockok.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

[89lude]

someone else doing a h2b aye? whats the plans for this build?

[CRXDEL501]

http://i.imgur.com/oU6E4.jpg

new headlights...

[shepparton]

my plan basically still the same the car will running stock h22 motor but this time with new clutch, lighthen flywheel, cam gear, new seal because too much oil leak, new hasport mount, hondata etc

[89lude]

Where you getting all your h22 seals from? I found it hard getting seals for Jdm h22a when I was putting together my h2b cause most of it is discontinued

[shepparton]

what seal you looking for? i think jdm h22 or not or type sh are the same, except the head gasket different

you can buy from ebay and jdmyard also selling em but anyway i bought my vrs kit for h22 from local store it comes with everything

[89lude]

just curious in case my mate needs it, i sold the h2b setup ages ago just wondering because when i wanted vrs kit i couldnt get a hold of one and yonas didnt have any either. so you just got it from a local honda?

[shepparton]

i got it from my local spare part shop not from honda

[VT3C]

well.. on the weekend anyway..

http://i89.photobucket.com/albums/k210/VTEChnique/100420121800.jpg

[zhong]

http://www.zcd.com.au/eg/front.jpg

[na-118]

nice setup what power etc you running?

[zhong]

I havent had it tuned or dynod yet. It's running on a basemap we made. Haha nothing to crazy, but definitely quicker. :P

[hmetro24]

Good job Onion nice to see it done, tune it and post some dyno's :). Gonna start building my B20 vtec ;) soon

[Gtstripes]

cleaned up my engine bay for abit on my sedan.

and nothing on my hot pink hatch

[ericl33]

I havent had it tuned or dynod yet. It's running on a basemap we made. Haha nothing to crazy, but definitely quicker. :P
get on it!!!

[zhong]

get on it!!!

Waiting for my tuning kit! :D But it is now equipped with pidgeons. lol

[na-118]

9" 6uls bronze will be wrapped in 225/50/ tyres
http://img641.imageshack.us/img641/9254/20120421151451.jpg (http://imageshack.us/photo/my-images/641/20120421151451.jpg/)

Picked up a ITR rocker cover that had paint damage. waiting for some 10 an bungs to be welded for catch can. purchased spray on paint stripper and clean it up, ready to be painted bronze metallic.
http://img193.imageshack.us/img193/2448/20120421154508.jpg (http://imageshack.us/photo/my-images/193/20120421154508.jpg/)

Purchased hardrace steering rack bushes,
http://img546.imageshack.us/img546/2615/20120421154757.jpg (http://imageshack.us/photo/my-images/546/20120421154757.jpg/)

Purchased ITR intake manifold, cleaned, hot washed + acid bathed, thanks to dynall and 89 lude for wrinkle black inspiration.
http://img24.imageshack.us/img24/764/20120421154543.jpg (http://imageshack.us/photo/my-images/24/20120421154543.jpg/)

Purchased extended studs for the 6uls to fit over. + purchased 1 wheel nut as i misplaced one years ago.
http://img15.imageshack.us/img15/7966/20120421154810.jpg (http://imageshack.us/photo/my-images/15/20120421154810.jpg/)

Purchased hardrace roll centre adjusters. front end parts nearing a complete!
http://img842.imageshack.us/img842/5548/20120421154822.jpg (http://imageshack.us/photo/my-images/842/20120421154822.jpg/)

Purchased Rear trailing arm bushes hardrace.
http://img811.imageshack.us/img811/3038/20120421154944.jpg (http://imageshack.us/photo/my-images/811/20120421154944.jpg/)

Purchased aftermarket front bar replacement, as i hacked up my old one for track. will be painted in a few weeks along side with spoon mirrors and rocker cover and js racing air duct.
http://img837.imageshack.us/img837/6442/20120421155123.jpg (http://imageshack.us/photo/my-images/837/20120421155123.jpg/)

Purchased oem eg6 lip for daily, js racing one will be on order shortly for hardcore spec.
http://img855.imageshack.us/img855/531/20120421155317.jpg (http://imageshack.us/photo/my-images/855/20120421155317.jpg/)

[ericl33]

^^^^^

http://gifsforum.com/images/gif/omg/grand/glass_drop_gif.gif

[r3ckless]

Asdffghjkk

[ericl33]

^^^^^

http://i1087.photobucket.com/albums/j480/tbmindustrys2/el-meme-mother-of-god-animado.gif

[mrwho]

http://www.zcd.com.au/eg/front.jpg

Are you running air conditioning? I still see the running gear but no condenser?

[Red_EG4]

Purchased oem eg6 lip for daily, js racing one will be on order shortly for hardcore spec.
http://img855.imageshack.us/img855/531/20120421155317.jpg

Where'd you get that bad boy from? :eek:

[zhong]

Are you running air conditioning? I still see the running gear but no condenser?

Haven't put it back in yet, need to get some welding done before I can slap it all back! It's cold these days anyway..

[na-118]

Where'd you get that bad boy from? :eek:
Jdmyard yo

[MIK020]

well did all 4 rotors and pads also did spark plugs with oil and all filters also did the washer bottle and jets and wiper blades car is amazing now lol

[jdm18c]

Got new front tyres
DIY sprayed my calipers Holden perfect blue
Fitted blue work lug nuts!!http://img.tapatalk.com/31b20403-5ab1-5119.jpg

[Lanzamus]

My mate and I Matt black wrapped my roof, installed DC2R springs , DIY amber indicators for $2.50 lol. And on my mates ek did an oil change, tidied up his front lip and swapped spark plugs. :)

http://i51.photobucket.com/albums/f399/soultrain69/IMG_1005.jpg

http://i51.photobucket.com/albums/f399/soultrain69/IMG_0987.jpg

http://i51.photobucket.com/albums/f399/soultrain69/IMG_0990-1.jpg

http://i51.photobucket.com/albums/f399/soultrain69/IMG_0991.jpg

[EG52NV]

My mate and I Matt black wrapped my roof, installed DC2R springs , DIY amber indicators for $2.50 lol. And on my mates ek did an oil change, tidied up his front lip and swapped spark plugs. :)

Pics or this post is useless :P

And you forgot to mention we ****ed off your stupid roof rack rail for a cleaner looking roof

[connorling]

installed defi rev gauge with shift light and installed the oil pressure and water temp gauge in the A pillar mount and bolt it onto somewhere above the glove box.

personally i dont like it, will see if i can make it not too stand out.

http://i1168.photobucket.com/albums/r500/hks071/interior1.jpg
http://i1168.photobucket.com/albums/r500/hks071/interior2.jpg

[GSi_PSi]

sorry to say but that interior needs some serious work !..
eww

[connorling]

sorry to say but that interior needs some serious work !..
eww

haha yes. soon when i have time off from work.
track car anyway, dont really care.

[Lanzamus]

Nice work, but if track car remove more plastics and shit? :P

[GSi_PSi]

haha yes. soon when i have time off from work.
track car anyway, dont really care.

Removing carpet and leaving sounddeadening looks bad imo. Respray your shifter plastic back to black.
Whats the point of the guages if there all the way in the passenger view, pretty sure if ur racing and need to check ur gauges it
would be easier in the pillar or on the dash slightly to the middle. Why did u need a 11,000rpm tacho slap bang in the middle of your cluster,
are you revving more than 9,000rpm?. Take it as constructive criticism

[na-118]

http://img515.imageshack.us/img515/9141/p5030001large.jpg (http://imageshack.us/photo/my-images/515/p5030001large.jpg/)

put on for wicked wednesday but was cancelled due to weather forecast!

[white_ep3_civic]

Color coded my mirrors and side strips, took off my shitty cannon and installed a new sound system.

[ericl33]

Color coded my mirrors and side strips, took off my shitty cannon and installed a new sound system.
no pics, no care.

[connorling]

Removing carpet and leaving sounddeadening looks bad imo. Respray your shifter plastic back to black.
Whats the point of the guages if there all the way in the passenger view, pretty sure if ur racing and need to check ur gauges it
would be easier in the pillar or on the dash slightly to the middle. Why did u need a 11,000rpm tacho slap bang in the middle of your cluster,
are you revving more than 9,000rpm?. Take it as constructive criticism

thanks for the reply. there was a reason i put the gauge in the passenger side, because there is a hole there, and i was thinking for to cover it.

as for the deadening, i work FIFO, havent really got time to get to it, the carpet was stripped when i bought the shell months ago, and it was full of dog hairs, so i decided to take the carpet out, and it was summer, so i didnt wanna work on the sdeadening in that heat, and it was dragging on til now.
will clean it up when i go back home next.

as for the techo, i dont revv til 11000rpm, i wanted a rev gauge because i always ovr revv the engine when the turbo kicks in, and i want to keep my eyes on the road, i wanted that guage for shift light really, and my mate was selling it, so i said y not.

will show picture once i touch up the car a bit more.

:)

[PGB]

http://i874.photobucket.com/albums/ab310/swiftaddiction/EG%20Body%20Work/DSC03548.jpg
Finally got around to painting it

[EG52NV]

Wow beautiful colour!

[PGB]

Its a tuxedo black metallic and isn't as silver in person. There is a lot of white reflection from the booth in most of the pics. Actually looks similar to original colour in the above picture which would be highly disappointing lol
This picture gives a better idea I think. Sorry for the huge pics.
http://i874.photobucket.com/albums/ab310/swiftaddiction/EG%20Body%20Work/DSC03546.jpg

[jdmek]

big booth man truck booth?
nice job

[na-118]

yes it's a truck booth chief runs the shop :)

[CivicEGSI]

http://www.carsales.com.au/private/details/honda-civic-1992-12475739?base=1216&vertical=Car&cr=3&eapi=2&__N=1246%201247%201252%201282%204294965322%2042949 65250%201216&silo=Stock&Range=Price:Min,2500~0.5&sort=default

Thinking of buying this, input?

[2MPRS]

http://www.carsales.com.au/private/details/honda-civic-1992-12475739?base=1216&vertical=Car&cr=3&eapi=2&__N=1246%201247%201252%201282%204294965322%2042949 65250%201216&silo=Stock&Range=Price:Min,2500~0.5&sort=default

Thinking of buying this, input?


that looks like a d15b7 motor with a d16y7 valve cover and by the looks of it a small front end hit bumper doesnt line up still isnt a bad price i guess

[B18C VVTi]

Are those Buddyclub QFs mate? Always wanted a set of those. Got a pic zoomed out? want to see how they look on an eg.

ta.


Got new front tyres
DIY sprayed my calipers Holden perfect blue
Fitted blue work lug nuts!!http://img.tapatalk.com/31b20403-5ab1-5119.jpg

[white_ep3_civic]

no pics, no care.

I'll post some pics tonmorow

[PGB]

http://www.carsales.com.au/private/details/honda-civic-1992-12475739?base=1216&vertical=Car&cr=3&eapi=2&__N=1246%201247%201252%201282%204294965322%2042949 65250%201216&silo=Stock&Range=Price:Min,2500~0.5&sort=default

Thinking of buying this, input?

Decent platform to start with. I'd try bargain them down the price of the clutch though considering it'll need rego soon.

Yeah, Its a truck booth jdmek. I should post the pic from outside the booth. It looks ridiculous with a little car in it lol

Also picked these up. Delivered cheaper than I could pick up a set of std corner lamps locally lol. I really wanted the reflected part orange because I did a blinker delete but these will do. Will be getting orange LED globes because the globes supplied are quite frankly shit lol
http://www.ebay.com.au/itm/270910876431?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_1999wt_1037

[jdmek]

PGB do you run the shop???
your boss hire the booth out??
i love big booth

[ericl33]

I'll post some pics tonmorow
I wonder if you posted this and then went to sleep or you have been up since 3am.....

cos if you went to bed, now is tomorrow.

[PGB]

PGB do you run the shop???
your boss hire the booth out??
i love big booth

To be honest you'd get it cheaper elsewhere. It costs a fortune to run a bake cycle on this booth

[white_ep3_civic]

I wonder if you posted this and then went to sleep or you have been up since 3am.....

cos if you went to bed, now is tomorrow.

By tommorrow I mean sometime this week.

[Egxris]

installed a different lip on the eg. mugen style

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash3/525903_10150723887612539_738212538_9203183_5315651 27_n.jpg

[slow_poke]

installed a different lip on the eg. mugen style

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash3/525903_10150723887612539_738212538_9203183_5315651 27_n.jpg

Bro that's wings west, thats my old one that i gave to mango lol i can tell by the hit on your left hand side of the lip.

[Egxris]

Hahaha cheers for that (guessing the black front bar). *edit wings west.

[PGB]

http://i874.photobucket.com/albums/ab310/swiftaddiction/EG%20Body%20Work/DSC03559.jpg
http://i874.photobucket.com/albums/ab310/swiftaddiction/EG%20Body%20Work/DSC03557.jpg
Fit up early this morning. Coffee and down the shed to fit the doors up now

[ericl33]

that looks not bad.....

what's under the hood?

[PGB]

All the engine bay contains a whole lot of priorities at this point in my life. None of them involve horsepower unforunately lol
Its just a family car dude. If it ever blows up then I'll have a think about it

[ericl33]

All the engine bay contains a whole lot of priorities at this point in my life. None of them involve horsepower unforunately lol
Its just a family car dude. If it ever blows up then I'll have a think about it
ahh, ok:)

good luck with plans.

[zhong]

Looking good, how much lower are your rear's from stock? And are you on lowered springs or on a different setup?

[white_ep3_civic]

Here's the mirrors and side strips. The mirrors turned out good but the side strips came out shit
http://i945.photobucket.com/albums/ad292/cree182/95da4255.jpg
http://i945.photobucket.com/albums/ad292/cree182/dab01193.jpg

[PGB]

Looking good, how much lower are your rear's from stock? And are you on lowered springs or on a different setup?

Cheers Zhong. I'm unsure of the drop they were on the car when I purchased it but I presume its only slight. Mabye 1 1/2 inch with Eibach shocks and King springs.

[CivicEGSI]

Looking to H2B swap, and gurus here willing to answer a few FAQ's?

[ericl33]

By tommorrow I mean sometime this week.
waiting.

[white_ep3_civic]

waiting.

I already put pics up

[ericl33]

I already put pics up
sorry, too much in my mind.

[Egxris]

Put my new wheels on and lowered the rear end and installed front camber arms (Front -4 rear -3 camber). running Federal 595 Evo's all round now 205/45/16, Weds sports SA90 16x8 +33

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/319712_10150797595677539_738212538_9284628_2930670 22_n.jpg

[shepparton]

today i was checking piston to valve clearance, for my h2b with skunk stage 2 pro

http://img252.imageshack.us/img252/7719/h2ba.jpg (http://imageshack.us/photo/my-images/252/h2ba.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

[PGB]

After years of struggle between man, machine and tasty beverage I finally found and installed a cup holder.
Also considering a roof swap for a factory sunroof. Worth it?

[BOO IT]

Pics of cupholders?

[PGB]

Didn't think it was needed, Same as everyone else's lol
Ignore the grubby carpet. New one coming ;)
http://i874.photobucket.com/albums/ab310/swiftaddiction/EG%20Body%20Work/EGcupholders.jpg

[BOO IT]

Didn't think it was needed, Same as everyone else's lol
Ignore the grubby carpet. New one coming ;)
http://i874.photobucket.com/albums/ab310/swiftaddiction/EG%20Body%20Work/EGcupholders.jpg

That looks sweet ive been trying to work out how I can put them in my car without it looking terrible. Where did you get that from? :)

[PGB]

From a wrecker I visited yesterday. It was a lucky find though. Went to buy something else and got a pleasant suprise.
I think they only came in Si models. Could be wrong though.
Few on Ebay but all from overseas sellers at the moment. Search 'EG cup holders'

[SajadEG]

Bro that's wings west, thats my old one that i gave to mango lol i can tell by the hit on your left hand side of the lip.

Did you buy the lip from Aus or the states?

[FAITHLESS]

Put my new wheels on and lowered the rear end and installed front camber arms (Front -4 rear -3 camber). running Federal 595 Evo's all round now 205/45/16, Weds sports SA90 16x8 +33

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/319712_10150797595677539_738212538_9284628_2930670 22_n.jpg

http://chzmemebase.files.wordpress.com/2011/07/memes-do-want.jpg

[BOO IT]

From a wrecker I visited yesterday. It was a lucky find though. Went to buy something else and got a pleasant suprise.
I think they only came in Si models. Could be wrong though.
Few on Ebay but all from overseas sellers at the moment. Search 'EG cup holders'

Sweet thanks heaps!!! :)

[myztery]

Just installed traction bar
Cos I was bored
http://img.tapatalk.com/3aa65496-a070-1471.jpg

And replaced worn exhaust rubbers

[PGB]

Tasty as always Myztery. New car all up and running now?


Sweet thanks heaps!!! :)
I wouldn't buy what on Ebay at the moment though. Shop around locally and you might find one for $30-$40

Received and installed my new corner lamps and not really a fan of them lol
Better than the bare housings i had previously though. Anyone know where I can get these with the orange reflective section?
http://i874.photobucket.com/albums/ab310/swiftaddiction/DSC03581.jpg

[charliebrown]

^fitment looks goood man, i like it without the amber bit. looks something different nomsayin

[na-118]

any difference with traction bar rob?

[Alexx]

205/45/16, Weds sports SA90 16x8 +33



looks great! Nice work bud

[myztery]

any difference with traction bar rob?

I don't know yet I couldn't get it off my driveway lolz traction bar is 30mm lower than the exhaust lol...
Gonna change rims and tyres to try and raise it :)

[Egxris]

Installed my new set of Rays Blue Wheel nuts to go with the Weds Sports SA90's :)

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-prn1/564816_10150812515547539_738212538_9323471_1488287 795_n.jpg

[myztery]

[QUOTE=PGB;3410100]Tasty as always Myztery. New car all up and running now?

yeh bubddy been up and running for a little bit now

[BOO IT]

Tasty as always Myztery. New car all up and running now?


I wouldn't buy what on Ebay at the moment though. Shop around locally and you might find one for $30-$40

Im in Townsville, I wont find jack up here without ebay, im ringing around wreckers everywhere though.

[PGB]

Nice one Rob. Sorry if you already posted it here lol Been pretty busy. Link me up if you got pics please

I meant local Ebay or even here on OzHonda BOO IT :) Postage kills the value if getting it overseas. They pop up from time to time ;)

[zhong]

http://zcd.com.au/eg/old_skool.jpg

[charliebrown]

^them challengers from firesport? shietttt

[EKVTIR-T]

Nice man

[zhong]

Yep. A bit too aggressive, but meh better than the steelie 5.5" shiet.

[Bludger]

http://zcd.com.au/eg/old_skool.jpg
damn, looks super tough.....

[PGB]

They look great zhong. Now sure I'd feel them same if she wasn't black. Made for it.
Too aggressive :/ Never!

[na-118]

http://www.ozhonda.com/forum/showthread.php?143280-na-118-s-eg-h22-build../page17

[Egxris]

Installed a Type R Distributor and got rid of my pesky check light. Now i have VTEC again :)

[Rayseuro04]

Put in rear camber kit, EG6 Lip, EG6 wing.

http://i1260.photobucket.com/albums/ii580/rays2701/122.jpg

http://i1260.photobucket.com/albums/ii580/rays2701/118.jpg

[zhong]

^^^ Nice!

Specs on wheels and camber?

[Dmitar]

Great cars guys keep up the great work! i am now in hunt for a Eg/Ek hopefully get something soon.

[Rayseuro04]

^^^ Nice!

Specs on wheels and camber?

Thanks man......The specs on the wheels are 15x8 + 22 offset. Not sure what the camber settings are in the rear I took the rear camber kit off a mates car. All I know is that is scrubbing pretty bad before the camber kit and now it doesn't scrub at all.

[zhong]

Nice.. Looks like I need myself some adjustable camber arms.. 15X7 +8 with full tyre ain't guard friendly at all.. :(

[charliebrown]

Nice.. Looks like I need myself some adjustable camber arms.. 15X7 +8 with full tyre ain't guard friendly at all.. :(

what tyres is it got? 205/50? not worried about wheel bearings?

[zhong]

195/50 - I was thinking about that yesterday to be honest.. lol Might go stretched.. Mate runs 16X8 +11 on his CRX but with a tad of camber and he's not worried - so I think I'll be okay.. *fingers crossed*

[Egxris]

It will be fine. im running -4 front and -3 rear to fit 16x8 +33(205/45) under the guards.

[dorikin]

nearly finished refurbishing these bad boys

http://img254.imageshack.us/img254/1424/img2423d.jpg

[Egxris]

Installed my new arm rest

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-prn1/564341_10150843522037539_738212538_9425168_5054616 83_n.jpg

[zhong]

^^^ Want shifter extension. Where?

[na-118]

shifter extensions are shit, invest in fastline shifter