Ek wireloom into 92 eg with d16y5

[Miicky]

Ok, so I had to replace the wireing the loom is in and basiclly everything is working except the engin is not plug and play with the harness..

Having trouble hunting down the correct wire digrams can any one help?

[VTec1987]

Use the current wiring loom from your Eg (efi only), then everything thing should plug straight up, some plugs will need to be change

What Eg do you have? GL GLi Si Vti?

More information would be great

[egb16b]

So you using the ek obd2a loom in the eg??

And what have u changed exactly?? And what came with the swap? The ek engine loom only or interior loom as well?

What ecu you using??

Better off using d16y5 engine loom..plugged into stock eg shock tower plugs(going back to interior loom)
Then using ecu jumper obd1 --> obd2a for the d16y5 ecu to work with the eg loom.

May have to add a few extra wires for various sensors and plugs.

[VTec1987]

You can not use Ek loom on your eg, it will not work, ek wiring loom goes to cabin, eg/dc loom stops at shock tower