FAQ / Usefull threads

[wynode]

Post up links here if you have em :)

General
Suspension Technical Definitions (http://www.ozhonda.com/forum/showthread.php?t=6396)
Swaybar / Camber fitting (http://www.ozhonda.com/forum/showthread.php?t=6043)
Swaybars function/explanation (http://www.ozhonda.com/forum/showthread.php?t=322)
What is offset? (http://www.ozhonda.com/forum/showthread.php?t=22590)
Honda's with / without swaybars (http://www.ozhonda.com/forum/showthread.php?t=26820) - A listing of which models come with front/rear swaybars and their sizes
Tyre size / rim calculator (http://www.miata.net/garage/tirecalc.html) This tool helps calculate and compare your current stock rims/tyre dimensions compared to others.
Stiffer Chasis (http://www.ozhonda.com/forum/showthread.php?t=26132) - Adding bars to increase chasis rigidity

Integra
DC2 Vti-R stock suspension upgrade recommendations (http://www.ozhonda.com/forum/showthread.php?t=26105)

[bennjamin]

here is a small add-on , linked from

http://www.enkei.co.jp/en/t_know.html (http://www.enkei.co.jp/en/t_know.html)



http://www.enkei.co.jp/en/images/elem_global_dot333.gif
NAME OF WHEEL PARTS
http://www.enkei.co.jp/en/images/elem_global_dot999.gif

http://www.enkei.co.jp/en/images/elem_local_t_know_sketch01.gif
http://www.enkei.co.jp/en/images/elem_global_dot333.gif
WHEEL SIZE
http://www.enkei.co.jp/en/images/elem_global_dot999.gif

http://www.enkei.co.jp/en/images/elem_local_t_know_sketch02.gif



http://www.enkei.co.jp/en/images/elem_global_dot333.gif
OFFSET
http://www.enkei.co.jp/en/images/elem_global_dot999.gif
http://www.enkei.co.jp/en/images/elem_local_t_know_sketch03.gif The offset indicates the distance from the center of the rim to the attaching disk part (unit:m/m). As seen in the attached drawing, the offset is indicated by "+" when the fitting surface extends beyond the central line of the rim and "-" when it is falls within. Caution is required to prevent the tire from coming into contact with the fender of the vehicle or the brake caliper if the offsets are very different.



http://www.enkei.co.jp/en/images/elem_global_dot333.gif
P.C.D
http://www.enkei.co.jp/en/images/elem_global_dot999.gif
http://www.enkei.co.jp/en/images/elem_local_t_know_sketch04.gif The number of bolts used to install a wheel varies from 4 to 6 depending on the vehicle model (except for some vehicle type), thus the wheel to be installed should also possess the same number of hub bolt holes. P.C.D. stands for pitch circle diameter, and indicates the diameter of the circle in mm connecting the center of each hub bolt. Since the P.C.D. also varies according to the vehicle model, make sure a suitable one is selected.



http://www.enkei.co.jp/en/images/elem_global_dot333.gif
CLEARANCE
http://www.enkei.co.jp/en/images/elem_global_dot999.gif
http://www.enkei.co.jp/en/images/elem_local_t_know_sketch05.gif
Fender clearance indicates the marginal space between the tire and the fender or body of the vehicle. Inner clearance indicates the distance between the tire and wheel and the body part which is positioned closest to the tire and wheel. Dimensions for both right and left clearance should be measured on a level surface, and the smaller value is then considered as the inner clearance.



http://www.enkei.co.jp/en/images/elem_global_dot333.gif
TIRE SIZE
http://www.enkei.co.jp/en/images/elem_global_dot999.gif

http://www.enkei.co.jp/en/images/elem_local_t_know_sketch06.gif

1-Tire width (mm or inch)
2-Aspect ratio
3-Radial construction
4-Rim diameter
5-Load index
6-Speed symbol
7-Tire outer diameter (inch)
8-Ply rating




(http://www.enkei.co.jp/en/t_know.html#pagetop)
http://www.enkei.co.jp/en/images/dummy.gif http://www.enkei.co.jp/en/images/elem_grobal_bgcorner_b.gif