Changing turbo, where to put water lines?

[FastFwd]

Guys changing my turbo soon from t04e to gt28rs...28rs is water and oil ran...my t04e is only oil soo i need to get water from somewhere...do you guys know where the best place to get the water + drain?

[SLOWEGG]

Here ya go > http://www.ozhonda.com/forum/showthread.php?t=29272&highlight=water+lines

So from the head, run to the turbo, then turbo to the TB thingy.

[FastFwd]

Thanks Slowegg,

In that pictures it shows where to get it from but is there something on there already? do you need to cut and put a T join in? or is there something else?

[tekung89]

woah , so theres another way of tapping the water? the water line closest to the injectors is one of my lines that i ran to the turbo, the other to the left wasnt my 2nd choice. i saw that the 2nd one and it connects from that area down somewhere back into the engine block or head. but yeh i reckon jus cut it and tap it with a T peice to run ur second line

[tekung89]

making life easier instead of goin to the link
http://members.optusnet.com.au/loxy/car/turbo/new_setup/install/water_lines.jpg

[superR]

as said above run the lines between the trottle body and the head.

[FastFwd]

Yeh i think i figured it out when i had a good look over the weekend