GReddy Kit + D16Y1 SOHC VTec E-manage Untuned = 97.5WKW Not Bad!!

[hisoka]

yer not expecting it to be hardout, just doing for fun around~i would rather NA, but i wanna give this turbo honda a go~.

so ecu comes with the kit or is add on, ?

[Lukezen27]

yer not expecting it to be hardout, just doing for fun around~i would rather NA, but i wanna give this turbo honda a go~.

so ecu comes with the kit or is add on, ?

Nope includes ECU:thumbsup:

[JasonGilholme]

i think lylse (sexc86) is running a td04/05 on his d series turbo. send him a PM. should be able to help you out.

[hisoka]

yer i was talking to him on another thread lol~intresting.

[kraiye]

luke pretty sure yours is a TD04, its about a T25 equivalent
td04l? td04h?
from memory i think the 'h' is about a t25 and the 'l' is closer to a t28 ??

[Limbo]

not 100% sure but something like that,
Not that good with the td range

[Lukezen27]

Well one motor blown :(

Thrown a rod on the dyno today

[VTi_b0i]

thats unfortunate man... but u knew it would happen running such high boost

[STOCK]

at least a d series is a cheap fix

[Lukezen27]

at least a d series is a cheap fix

She hit 160wkw before she blow though lol

Dam over boost somehow but yet to work it out...

Brand new e-boost2 installed only a few weeks ago

[Webby_roller]

Thats interesting..... Were they stock rods???

I was researching the possibility of a turbo upgrade for my D and most of what i found was that the rods had an almost power barrier.....

At 220 hp/157kw, the rods were said to break.... and u made 224hp/160kw and they broke....

Are you going for forged rods next time round???

[Benson]

damn 160kw? not too bad ey...

what mph were you gettin that drag night?

[votek]

thats a shame :(

what would a b-series throw rods at?

[Lukezen27]

Guys

She was not tuned for 160wkw!!! that's what DOHC VTec Turbos make with stock internals

She was tuned at 137kw 11psi

That only happened on the dyno after a problem somewhere that caused a big boost spike..

I’m yet to working what exactly caused this but once I get my car back I’ll take a closer look…

Its more than likely at vac hose has come loose…

And yeas the weakest part of the D’s is there tiny little con rods hahah and yes completely stock

[Limbo]

there are quite a few B series pushing 200kwatw on stock internals.
B series bottom ends are alot tougher

[Weq]

Guys

She was not tuned for 160wkw!!! that's what DOHC VTec Turbos make with stock internals

She was tuned at 137kw 11psi

That only happened on the dyno after a problem somewhere that caused a big boost spike..

I’m yet to working what exactly caused this but once I get my car back I’ll take a closer look…

Its more than likely at vac hose has come loose…

And yeas the weakest part of the D’s is there tiny little con rods hahah and yes completely stock

Yeh maybe this wasnt toda's fault. Quite common for overboosting to throw a rod, probably hit about 14psi. Too much timing, too much force caused by the long R/S ratio.

[Limbo]

i'm still suprised the eboost didn't catch it

[Lukezen27]

Well guys

That in fact is what's happened..

Just got my car back and the e-boosts to Turbo hose has blown off....

[Limbo]

o well guess it wasn't the tune then

now u just need bigger turbo!

[Lukezen27]

o well guess it wasn't the tune then

now u just need bigger turbo!

No the install :o

Anyway all good

He's the bugger
http://www.scruffie.com/luke/car/hose1.jpg


Other hoses
http://www.scruffie.com/luke/car/hose2.jpg


e-boost
http://www.scruffie.com/luke/car/hose3.jpg

[Limbo]

mate this is what the rear side of the t28 looks like
http://i.ebayimg.com/21/!BKS!vQQ!Wk~$(KGrH****jIEjlLmYd13BJZHlIW9,w~~_1.JP G

[Lukezen27]

mate this is what the rear side of the t28 looks like
http://i.ebayimg.com/21/!BKS!vQQ!Wk~$(KGrH****jIEjlLmYd13BJZHlIW9,w~~_1.JP G
Line not working

[Limbo]

http://cgi.ebay.com.au/Garrett-GT28-SR20-Nissan-Pulsar-GTiR-Turbo_W0QQitemZ280304445732QQcmdZViewItemQQptZAU_C ar_Parts_Accessories?hash=item280304445732&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A1%7C39%3A1%7C240%3A1318

try this

[Lukezen27]

http://cgi.ebay.com.au/Garrett-GT28-SR20-Nissan-Pulsar-GTiR-Turbo_W0QQitemZ280304445732QQcmdZViewItemQQptZAU_C ar_Parts_Accessories?hash=item280304445732&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A1%7C39%3A1%7C240%3A1318

try this

Yeah sweet

The intercool intake is different to mine the the rest looks the same

[Limbo]

yeah i can give that over cos its only for that particular turbo
Larger ones don't have that

[kraiye]

Well guys

That in fact is what's happened..

Just got my car back and the e-boosts to Turbo hose has blown off....
Tie all the hoses down mate! (and not with zip ties ;))

[Lukezen27]

Tie all the hoses down mate! (and not with zip ties ;))

lol guess so

[Lukezen27]

Nice photo :o

Just before
http://www.no-limits-performance.com/site/modules/coppermine/albums/userpics/10009/normal_img_4682.jpeg
Right before pop
http://www.scruffie.com/luke/car/on_dyno_one.jpg

Few bits and pieces out of the inside of my motor :(
After
http://www.no-limits-performance.com/site/modules/coppermine/albums/userpics/10009/normal_img_4685.jpeg

[kraiye]

sweet EG! lovin the front bar
what rims are they?

[Lukezen27]

sweet EG! lovin the front bar
what rims are they?

Thanks bro

HR's 17x7

She should be back up and running in a few weeks if all goes to plan :)

[STOCK]

Nice photo :o

Just before
http://www.no-limits-performance.com/site/modules/coppermine/albums/userpics/10009/normal_img_4682.jpeg
Right before pop
http://www.scruffie.com/luke/car/on_dyno_one.jpg

Few bits and pieces out of the inside of my motor :(
After
http://www.no-limits-performance.com/site/modules/coppermine/albums/userpics/10009/normal_img_4685.jpeg

Doesnt look like Todas workshop??? thaught Adrian took care of your management?

[Limbo]

he went for a dyno run for some reason

[Fo55il]

no offence but is that a legal dyno place?
the ones i been to are way more "professional"
looks a bit ghetto to me

[kraiye]

u need to get out more!
:p

[Lukezen27]

It was my local can club dyno day

[Weq]

hey luke, who did the install? DIY?

[Limbo]

well it was ur fav shop of course

[Weq]

I cant find any reference in the thread anymore? I would apprecite confirmation.

[Sexc86]

yeh luke really diggin your front bar mate

[kazam]

I cant find any reference in the thread anymore? I would apprecite confirmation.

alex did it didn't he???

[Lukezen27]

alex did it didn't he???

No

He did the early kit before any mods

[kazam]

ahhhh kk my mistake

[Weq]

No

He did the early kit before any mods

Things being kept on the down-low now i guess?

[Weq]

So ive installed an eboost on a greddy kit before and i know exactly why that hose popped off.

Has he explained to you how he cut corners, and as a direct result your engine is in peices? If he hasnt, i'll explain it to the whole of ozhonda tomorrow. A nice little appreciation thread for the consistantly outstanding professionalism shown this shop.

Oh, and let the blame game begin.

[kazam]

lol can't wait

[Lukezen27]

I would like to know why it came off...

It all looked tight to me

[Weq]

I would like to know why it came off...

It all looked tight to me

Isnt it interesting that every other line he installed doesnt have a cable tie. Must of been some uncertainty at the time... Taking the shortcut... But the shortcut failed. For a few reasons.

There is a reason why greddy has a pre-bent silicon hose on the OEM turbo/wastegate setup.

[Lukezen27]

Isnt it interesting that every other line he installed doesnt have a cable tie. Must of been some uncertainty at the time... Taking the shortcut... But the shortcut failed. For a few reasons.

There is a reason why greddy has a pre-bent silicon hose on the OEM turbo/wastegate setup.

No that's not correct

The Greddy kit comes with a straight blue hose you have to cut to your own length and also comes with clear cable tie's.

I’ve still got the blue hose and some of the clear tie's at home.

[Sexc86]

Just goes to show you should never use cable ties anywhere on your car. Unless your useing them to.... "Tie Cables" !

[Lukezen27]

Just goes to show you should never use cable ties anywhere on your car. Unless your useing them to.... "Tie Cables" !

Yeah I know that now Lyle :(

[hisoka]

might run one of these d turbos on a daily car lol~ just for turbo tunning fun.

[Lukezen27]

might run one of these d turbos on a daily car lol~ just for turbo tunning fun.

lol

I'll have some of that for sale soon :thumbsup:

[kraiye]

Just goes to show you should never use cable ties anywhere on your car. Unless your useing them to.... "Tie Cables" !
or to hold your gear shift boot up with ;)

[hisoka]

lol

I'll have some of that for sale soon :thumbsup:

lol nice. i might buy some shit from krayie too

i just got basic EG here the other day, might try it on. or my own EK. ive never driven turbo honda before. and i enjoy other turbo cars.

[Fo55il]

is it possible for an emanage to lose its settings, say if the batter y is taken out for a while .. etc?

[hisoka]

nope e manage has flash memory EPROM or someshit

[Fo55il]

cause my cars makin knocking sounds like its untuned....

[hisoka]

a honda or something else ?

you might have a airleak. have you done anything new to the car since last tune

[Fo55il]

hmm nah nothin at all,

airleak as in cooler piping?

ye its a honda

[hisoka]

yer could be~lol i dont know much about hondas man. but from other cars i know could be your airflow sensor has been damaged or is dirty.

[Limbo]

knocking noises?
If its knocking it would be pretty loud
are you sure its not a tappet noise?
Also what fuel you running?

[Fo55il]

running the unleaded 95,

nah it ssounds like its knocking, as in wen ur cars not turned and the injectors dun pump enough fuel,

it happens wen ...
say i rev to 3k n then hold it there n then 5 secs later makes this sound.
soudns like wen sumthin flexxible is poked in a fan ..

dunno if that made sense

[Limbo]

get a dyno run and it will tell what the problems are.
Was it tuned for ULP95?

[Fo55il]

yeah tuned on that

everythin was cool then like last week / 2 weeks ago it started happening.

1 year of boost no problem

[Lukezen27]

yeah tuned on that

everythin was cool then like last week / 2 weeks ago it started happening.

1 year of boost no problem

Hm bent something?

How much boost?

[Fo55il]

stock boost

:S

[Lukezen27]

stock boost

:S

5psi yeah

Hm doubt anythings bent then...

Just get it on the dyno

[Fo55il]

yeah wateva STOCK IS for d greddy kit.

motor runs fineexcept for d sound.

oh yeah and the oil light keeps comin on now, engine oil level is fine but it flashes sumtimes

ive noticed mostly wen i put it in neutral / at a halt/ low revs

[Lukezen27]

yeah wateva STOCK IS for d greddy kit.

motor runs fineexcept for d sound.

oh yeah and the oil light keeps comin on now, engine oil level is fine but it flashes sumtimes

ive noticed mostly wen i put it in neutral / at a halt/ low revs

Get it checked out bro

Sounds like somethings a miss

[Limbo]

engine light usually comes on from knocking

[Fo55il]

not engine, oil light

[Limbo]

if that's the case get an oil pressure sensor to test the pressure thru the rev range to see if u have any blockages

[Lukezen27]

GReddy Turbo mounted on my new B-series manifold thanks to Limbo (http://www.ozhonda.com/forum/member.php?u=2672)

Front
http://www.scruffie.com/luke/car/new_manifold_front.jpg

Side
http://www.scruffie.com/luke/car/new_manifold_side.jpg

Fits like a glove but sits a little different so I think the down pipe will need moding

Wounder how well she'll hold up on a B16A

[SHOGUNOVDDRK]

:)

Can't wait Luke

[Limbo]

we'll see how he goes, cos i'm getting mne setup also ;)

have to say i like the positioning of the Greddy dump pipe, looks like it give heaps of clearance

[Lukezen27]

:)

Can't wait Luke

Thanks Lloyd ;)


we'll see how he goes, cos i'm getting mne setup also ;)

have to say i like the positioning of the Greddy dump pipe, looks like it give heaps of clearance

At lest I'll be up and running...

Plus I doubt this turbo could kit my new engine lol

[VTi_b0i]

have u got the B16 yet Luke?

[Lukezen27]

Here's a nice photo

BANG
http://www.scruffie.com/luke/car/blown_up.jpg


Custom 2.5" Down pipe
http://www.scruffie.com/luke/car/custom_downpipe.jpg

[steve88]

that'll buff right out luke :P

[Limbo]

is that a hole in your block????
You know that's like almost impossible to weld cos its cast?

[Lukezen27]

that'll buff right out luke :P

Yeah tried that and blow my dremel up hahah



is that a hole in your block????
You know that's like almost impossible to weld cos its cast?

Yeah that blocks fuked lol

[JasonGilholme]

if it was a race engine they would have welded it up.

[steve88]

could of just replaced the block for a few hundred bucks lol, treat my baby well luke

[SHOGUNOVDDRK]

lol@Hole.

I thought my car had problems right now...

[Lukezen27]

Ben's butt just before the fun begins


http://www.scruffie.com/luke/car/Bens_butt.jpg


JDM B16A on the tyre to the right :thumbsup:

[VTi_b0i]

good luck :p

[Lukezen27]

good luck :p

Don't you know that's bad luck Christian lol

[VTi_b0i]

haha ahh no its not :p what are u doing on here? get on with it lol

[Lukezen27]

haha ahh no its not :p what are u doing on here? get on with it lol

hahah

Waiting for a new clutch :o

[VTi_b0i]

ahhh doesnt that suck! gotta wait till monday?

[Lukezen27]

ahhh doesnt that suck! gotta wait till monday?

More like 10 days :o

Coming from OS

[VTi_b0i]

OUCH! got run around? LOL

[Lukezen27]

OUCH! got run around? LOL

Hey Christian

Yeah look'n for this and that :thumbsup: