will 17" x 9jj. +17 offset fit a dc5r?
Printable View
will 17" x 9jj. +17 offset fit a dc5r?
I doubt it. Stock offset for DC5S is +45 with a 7" rim. I am unsure of DC5R but it shouldn't be too different to that.
I say that will fit as ive seen 17x9.5s fit on a dc5r in person.
The right mix of camber and drop and you should be fine.
Will look hot too ;)
Hmm
http://forums.clubrsx.com/showthread.php?t=368629
Should be able to get an idea of correct offsets here
Borrowed from CITR member - chargeR
17x9.5 +15
http://img231.imageshack.us/img231/1...bitchesrd0.jpg
As Q says it will fit with the right amount of camber and the right tyre size ;). That is my car pictured in Q_ball's post and those wheels just tuck with 5.something camber and 245/40 tyres. They are probably going to rub on the fenderliner clips though. When I want bigger tyres I will have to flare my guards.Quote:
Originally Posted by EG_VTEC
Very difficult to fit that at the rear though. Rolled and pulled guards, lots of camber (>5) and smaller tyres would be required.
wow -5 camber? wouldn't you get heaps of camber wear?
I have been running -4.6 for nearly a year and 20,000ks. Wear is acceptable and I have had my tyres flipped inside out.Quote:
Originally Posted by 2002 TeGgY
oh ok. hopefully ill be looking for some wheels with a crazy offset next year sometime after all the engine work is done...your wheel setup is the hottest i've ever seen on a dc5 btw! props to u
isn't that much negative camber a bit overboard for a road car?Quote:
Originally Posted by chargeR
i mean too much can make the car unstable in a straight line, and then there's the increased tyre wear..?
Dont be soft ;)Quote:
Originally Posted by rbk_212
Its obvious you have never gone to clubitr :pQuote:
Originally Posted by rbk_212
Some of the Aus boys are showing the yanks how its really done!