Printable View
Hey guys this problem just came up last night, my car alarm no longer locks the doors via remote but the alarm sound and lights still go off.. The central locking still works by hand and key but the remote will no longer lock or unlock the doors. Me and my mate pulled off the door panel and reconnected the alarm cables.. No change :(
Any thoughts would be appreciated
Pablos when you press the alarm does your doors still make a sound like they are TRYING to lock? If so, then there's nothing wrong with your alarm. It's a common problem with our cars as they get older. Open up the door and clean all the metal rods, then lubricate. Make sure you lubricate well. Concentrate on all the areas where they meet. If when you are manually locking your car with your hand from the inside and it's stiff, then lubricate while locking and unlocking your car a couple of times. This should solve the issue.
If they aren't doing anything at all (i.e. your alarm isn't functioning correctly) then I cannot help you my dear sir! Good luck though!
Yeah they're not even attempting to lock T_T
Central locking still work inside the car?
need lube on the rods
What rods? The central locking still works.. Just not by the remoteQuote:
Originally Posted by rey2009
Bump for any suggestions :(
99% of the time the aftermarket door lock actuator (that they fit with the alarm) shits itself over time and gets weaker... have the same problem right now on my EG but im too lazy to fix it..works on and off
The actuator is fitted inside the drivers door and looks like this:
http://www.auto-accessories.com/powerdoor/80174big.jpg
You can either buy it and replace it yourself or take it to an auto alec/alarm installer...relatively easy fix
Have you removed the door trim and tested the door actuator?
Nah we pulled off the door trim n played with the central locking n reconnected the cables, what's the best way to test it?Quote:
Originally Posted by flipfire
absolutely right. if that actuator is screwed than your c/l wont respond to your control. when i was fitting alarms this was a common problem.Quote:
Originally Posted by dorikin
as "dorikin" said try getting a new actuator and replacing it.
get a test light, probe the lock or unlock wire wire you are lock or unlocking with the remote. if it doesnt light up then its goneskiis.Quote:
Originally Posted by pablos8
or even, take off your door trim, you sit inside, get a mate outside with your keys and press the buttons, the actuator should move, if not its gone.