Modifying my Stock ECU P28 to not look for VTS-VTEC Spool Solenoid??

Hey Guys

Anyone know any easy ways to Modifying my P28 not to look for the 21 VTS - VTEC Spool Solenoid ?

Now the e-manage blue has taken over the VTEC cross over point the stock ECU is still looking for the VTEC Spool Solenoid..

ECU-MAN can do it no problems but he's not in Sydney and my project car is also my work car and I can't be without it for any period of time..

Both my brothers are AV PB makes and I work for an AV company so soldering will never be a problem if needed.. lol

Thanks Guys

Luke

needs to be disabled in the code. Do you have access to burning eproms?

Quote:

---

Originally Posted by ProECU

needs to be disabled in the code. Do you have access to burning eproms?

---

Hey ProECU

My ECU's not chipped so having access to ROM burner won't help?

doesnt the emanage have a feedback output wire for VTS back to the ecu?

Just connect D6 to A4

Quote:

---

Originally Posted by ProECU

doesnt the emanage have a feedback output wire for VTS back to the ecu?

---

You would think so wouldn't you but I don't think so and I'm using the very costly plug & play harness :thumbdwn:

Would just bypassing the e-manage and connecting VTS wire affect the e-managements ability to control the VTEC?

I've not opened my stock ECU but the back has
37820-P28-Q00
776-300226

Quote:

---

Originally Posted by ProECU

doesnt the emanage have a feedback output wire for VTS back to the ecu?

Just connect D6 to A4

---

Thanks bro

Any chance you can tell me how to find D6 to A4?

In pic forum would be awesome

do a search on the net for a pic. I dont keep pics coz its second nature to me.

Quote:

---

Originally Posted by ProECU

do a search on the net for a pic. I dont keep pics coz its second nature to me.

---

Dose the odb1 B16A have the same as my D16Y1 pin setup?
ie
http://b16a2.kicks-ass.net/diy/pgmfi...FI-pins1-2.jpg

Found this
http://www.superhonda.com/forum/f55/...inouts-217405/

D6-VTM VTEC pressure switch Light Blue (Purple on the e-manage), to A4-VTS VTEC solenoid GRN/YEL, (Blue on the e-manage)

Are you should connecting them will work?

Quote:

---

Originally Posted by Lukezen27

D6-VTM VTEC pressure switch Light Blue, n/a to A4-VTS VTEC solenoid GRN/YEL, n/a

Are you should connecting them will work?

---

Correct.

Quote:

---

Originally Posted by ProECU

Correct.

---

Cool

I'll go and give it a shot...

I do it on the ECU side or the wiring loom side?

Thanks

Luke

jump the emanage vtec signal and connect to ecu side of VTP

Quote:

---

Originally Posted by ProECU

jump the emanage vtec signal and connect to ecu side of VTP

---

NICE!!

The error codes gone

Now I'm off for a test drive to check if VTEC's working :thumbsup:

Then I'll solder em in :)

PS my ECU has all the wrong colours lol