trying contacting Benson or Fatboyz i think they have use them before.
Printable View
trying contacting Benson or Fatboyz i think they have use them before.
Ouch, Got burned by benny :P.
Anyone keen for a trackday 21st of August at Marulan? $100 for the day +$30 for a license, unless you have a CAMS or WP license.
Quote:
Originally Posted by Nepolian
I've got a buddy in japan atm getting him to buy me some Endless NS97's he reckons he found the front pads for $160 is that a decent price?
Hey Perry,Quote:
Originally Posted by Perry
Who's benson or fatboyz? Are they a workshop?
Sorry I'm new this whole thing. Lol
Thanks
Their known as the BYP boys they do anything from engine swaps, tuning sourcing parts etc. Highly reccomended!
Anyone know if there's much difference between tein flex and tein monoflex in terms of ride quality and performance?
Two totatlly different shocks! Mono is stiff! Lol...Quote:
Originally Posted by will13
and flex is still stiff.
I have BC N+ on my EG and i thought that was mega stiff (10/6?)
from what I can see, mono is a 14/16, am I in for a huge shock? lol
If ur after mono flex n ur car is a daily on Sydney roads I do not recommend. Even on the softest settings its still stiff ! Feel everything on the road. Good on some twisties and around wakefield though :DQuote:
Originally Posted by will13
Sent from my Desire HD using Tapatalk
Looks like I'll just have to keep it on the softest settings and make do - i put up with a harsh ride in the EG, im sure I can do it again. Keen to test them out at wakey
Anyone know if the engine mounts on the EP need to be removed/installed in a specific order. I have some Hasport ones I'm going to put in shortly.
I used this diy instruction set: http://forums.clubep3.com/showthread.php?t=752425Quote:
Originally Posted by RPS.13
Was fairly easy except you will need to loosen up most of the mounts to try and get all the bolts lined up especially the mount that goes under the airbox area...honda decided to put the bolt in the wrong way around and it's just soooo hard to access.
Hey guys anyone have a buddy club short shifter in their EP3??
When I brought down my civic from Japland it original shifter was cross threaded so I thought it would be a good excuse to buy one.
So far I am very impressed, there is so much less throw.
Cheers, thanks for the link man. I was reading something simlar from clubRSX, again it only showed the front and rear mounts. I'm glad I only have to install 3 and not 4!Quote:
Originally Posted by Twest
Did you use a torque wrench at all?
Like b16a2 said there known as BYP they have a build thread in the build section, if you have any question feel free to PM them their happy to help and give advise.Quote:
Originally Posted by TOUGE-ITR
Id love to pm them, whats their username?
Quote:
Originally Posted by TOUGE-ITR
- Benson or **correction**
fatboyz39
If anyone is after one
http://www.speedstar-racing.com/stor...5fe91e09603422
Noo i didn't :S, i didn't believe it was entirely necessary just don't over tighten the bolts and don't under-tighten. As my dad would say 'just hand tight...handtighten' hehe.Quote:
Originally Posted by RPS.13
Has anyone removed their steering wheel before?
I'm buying a boss kit but it seems there are 2 mounting types: one where the wheel/boss is held on with a nut and the other held on with a threaded bolt.
If DC5R is anything to go by, disconnect battery, pop the plastic covers from behind the steering wheel. It'll reveal I think 4 torx bolts (2 either side) that you'll need to undo to remove the airbag. Then unclip Horn. Do not go and turn the steering wheel after airbag is removed or you'll butcher the clock spring.
Either 19 or 21mm nut, give it a few wacks with a rubber mallet (wrap it in a cloth to prevent damage to the leather) and then remove the wheel.
Why has my account been disabled?
In certain areas of this forum....I'm confused.
you've been blocked out of the asian chicks thread? ;)
hey guys, im new to the forum and nice meeting you all!Just wondering if any of you guys know where I can get bodykits for my ep3 ard victoria?
Why?Quote:
Originally Posted by djfatboy
Someone stole yours hahah
i was in need of a new rear lip and bumper hahah
That's a bad Joho lolQuote:
Originally Posted by JohnO
I HAVE BEEN BLOCKED FROM POSTING THERE ASWELL :@@@@@ ..pewpew.Quote:
Originally Posted by JohnO
Check the yennora wreakers that paul got his gearbox from. They had a rear cw bumper for 600.Quote:
Originally Posted by JohnO
A preface ep3
What! Pooface EP3?
hahaha! lol
nah, i just got my car
Quote:
Originally Posted by Lukezen27
pew pew
nah i just need to respray my whole bar and lip one day... just never bothered.
anyone keen to join me on the 21/8 for a track day at MDTC? (Marulan Driving Training Center). Some friends going down :) It's $100 for the day and $30 for the license, or if you have a Wakefield license it can be used there aswell..Or CAMS.
you can get mugen style front lip and mugen style rear spoiler from ebay but quite expensive.Quote:
Originally Posted by djfatboy
Or you can get them from Hong Kong, much cheaper
how longs the drive down there man? same distance to wakefield?Quote:
Originally Posted by Twest
i think just under 200km?
its it pretty close to wakefield?Quote:
Originally Posted by JohnO
It's shorter, like an hour and a half away. Even closer than wake :DDDQuote:
Originally Posted by JohnO
I maybe interested when the day is closer.
It's in the weekend, right?
Its on a Sunday Guys!
Anyone running fixed back bucket seats in our cars? Hows the driving position and whats your set up!?
anyone need a k&n drop in air filter?
then im interested in marulan!
I heard marulan hasn't had their grass cut for a few months. :PQuote:
Originally Posted by JohnO
Sent from my Desire HD using Tapatalk
Anyone who is interested please let me know ASAP as I need to inform my friend who is booking everyone in.
Sent from my Desire HD using Tapatalk
Looks like its gonna be an ep3 all out battle lol
Quote:
Originally Posted by JohnO
Quote:
Originally Posted by Twest
No they don't have much grass but they have trees.
How about a day being a tree cutter at MTDC LOL?
Callin all ep3 boys, cruise this weekend any thoughts???
Day or Night Paul?
Um I'm not to sure about a day or night thing, I will speak with the other drivers and see what they think, so I'll get back to ya mate............ How's day sound???
National Pk? Putty Road woot woot lol
I havnt done that run in my car yet, that sounds like a bit of fun
putty rd is good fun
HAHAHA ohh sh##TTT...LOL I really hope no one desides to start a logging business...Quote:
Originally Posted by Poeter
We went on putty road last time so i doubt we'll go there this time. Plus the road is way too tiring. We need a place to go where we can eat and chill too this time.
Maybe robertson pie shop so we can go pass royal national park too.
sunday arvo? im just up for a small meet since perry just wants to have a look at my rims
there's this road out near marulan I really really want to take a drive on. It takes you too nowra from inland it was just dirt road before and they redid it now and it's BRAND NEW! turpentine Road...Looks heaps sick....and it's pretty much empty...always http://maps.google.com.au/maps?saddr...ra=ls&t=h&z=11Quote:
Originally Posted by Blackep3
Why dont we just do the drive too cronulla or something. ORRR La perouse?Quote:
Originally Posted by stienerv2
I'll make it Sunday 12pm. Location has not been chosen yet so im open for ideas. La perouse is alrite, what does everyone else think?Quote:
Originally Posted by JohnO
how the hell did this thread get to 972 pages lol
We've Got a lot of love <3 #nohomoQuote:
Originally Posted by unl3a5h
Help needs the link to the cheap window repair man??
Gonna do a oil change in the next week or so, does anyone know the part number for a oil filter? Would it be the same as the FN civic R or Intergra type r ones since they are similar K20
You can actually use ether ones listed for the K20Quote:
Originally Posted by supabob
Correct ones long and thin and its easier to remove but if like me ya got some B16/B18 ones short and fat left over they fit too but coze they fat they a pain to install and remove as pipes and stuff get in the way
cause i like to spam. :)Quote:
Originally Posted by unl3a5h
Quote:
Originally Posted by Lukezen27
Thanks mate, usually how many litre of oil does the ep3 take?
A bit over 5
5.2 from memory
Hey guys my car just got complied and the compliance guy did a engine oil and filter change filter is OEM I dont know what oil he used.
I want to put some motul 5w30 in myself now though.
My question is; is it worth changing the oil filter as it is brand new anyway and it is the one I was going to buy anyway or should I just drain the oil?
Thanks :)
Na leave the filter broQuote:
Originally Posted by EP3TYPER
As long as your sure he changed it
I know that the filter was changed 100% along wit.h the oil just not sire what oil was used but the filter is OEM.
Only concern was the oil he used would remain in the filter but i guess it wouldnt make a difference?
Anybody after the rubber skirt that sits just under the front bumper?
nah last time the dealer told me that my ep3 gets serviced before delivery it turned out to be a shonky chinese filter and oil was like sludge.
Hey guys found a link for those annoying bumper clips.
http://www.ebay.com.au/itm/20-Bumper...#ht_5225wt_998
i'm happy to buy a pack with you.
I bought a few packs from America. Got about 40 all up. Cost me almost $50 after shipping costs. Wished I looked harder and found those first lol. My splash guard ones are completely destroyed and I can't even get them out so most of the clips went to waste too. :p
Thanks for the link ^^^
I bought a few packs too from the states, from memory it cost me about $12 AUD shipped for 20, they were a lot harder than the OEM ones and shiny (misleading images on ebay!!!). My panel beater didn't even end up using them. They must have used there own ones.
I think i'll buy a pack... Damn cheap!
Hey guys looking at getting a mugen grill for my EP3 just wandering if I need to cut into the front bumper to fit it? As it looks as though you need to?