intake air temp wiring..

Quote:

---

Originally Posted by CRXer

red/yellow is always iat & sensor grounds likewise green/???,on untampered harness anyway lol

---

ok thanks... oh but looking at the connector on the intake the 2 pins are top to bottom, top pin ground or bottom pin??? sorry i should have explained myself more.... and what about that purge just leave it????

Quote:

---

Originally Posted by big tone

ok thanks... oh but looking at the connector on the intake the 2 pins are top to bottom, top pin ground or bottom pin??? sorry i should have explained myself more.... and what about that purge just leave it????

---

Quote:

---

Originally Posted by CRXer

doesnt matter which way iat plug is wired,its a thermistor(temp sensitive resistor) so polarity dont matter.

the other spare plug u found is prob the purge plug,see if u can see what pin the red wire goes to at ecu end to confirm.

not sure what obd2 will do with lack of purge solenoid hooked up,i assume it will CEL,but ecuman will know.

---

........

Quote:

---

Originally Posted by ECU-MAN

you should really do a continuity test back to the ECU to ensure you have the correct wire before connecting it. you dont want to blow the ECU

---

youd prob do well to follow this advice,as i dont know what is going on with your conversion harness/whatever back at ecu

k thanks for that..

ok well i have it connected like informed but the engine light is comming up.. i thought it might have stayed due to disconnecting it in the first place but so i reset the s300 error codes it still keeps popping up and now eld is appearing too,,, how can i test the iat to see where i could have gone wrong

http://www.ozhonda.com/forum/showthread.php?t=67515

ok i have checked everything and i have found that the iat has shit itself.. theinside of the sensor has melted and the wires are showing and have burnt apart.. so now to find out where i can get one from....

possibly from the full 12V it was getting from the purge plug,replacement iat should see u right.

edit,just remembered it wasnt hooked up at all,ignore me,lol.