ITR bits into an EG conversion.. Lot's of questions

Quote:

---

Originally Posted by Benson

Post up some pics dude:p. Im in the process of doing my door trims.

---

Don't get the ITR trims till christmas. Once I have them I will update that thread.

dude, did u not see that i have already addressed the point of the installer wanna more money from me?????????? thats y he made up all this crap......thanks:thumbsup: for ur comment with a little reading on people post;)

Quote:

---

Originally Posted by Benson

Dc2 radiator can fit in the easy with a little modification of the bottom brackets

ITR Master cylinder and booster fits in an EG with no problem.

Dash board is easy to put in, jsut take abit of time.

Dude stop posting misleading informtion. Do some research noob

---

Quote:

---

Originally Posted by steve88

if your doing a k series swap, youll need new fuel lines and tank anyway so getting carbie wouldnt make a difference anyway

---

Yes it does if you cant source the parts. Im having so much trouble finding the gear for this EFi conversion, i seriously wish i just went with a fuel injected car. I think i might end up needing custom hardlines from the tank.

I'll keep trying to find these parts. No luck as yet though. Ive tryed all the melb wreckers, and PM'ed a few people here.

Quote:

---

Originally Posted by Paul1985

Yes it does if you cant source the parts. Im having so much trouble finding the gear for this EFi conversion, i seriously wish i just went with a fuel injected car. I think i might end up needing custom hardlines from the tank.

I'll keep trying to find these parts. No luck as yet though. Ive tryed all the melb wreckers, and PM'ed a few people here.

---

http://nzhondas.com/phpBB2/fs-heaps-...ght=fuel+lines
;)

If you get desprite :)

You know what.
I dont see why you need lines off an EFi EG.
Im gonna use my carb ones.

I need rear brake lines though

does the itr rear seats fit a eg perfectly?

it fits, but a few gaps .. thats what ive heard from everyone.

Quote:

---

Originally Posted by connorling

dashboard( carby dashboard doesnt have rpm)
thanks

---

umm you sure. Mine does and it's a November 92 Build GL Twin carb.

http://img143.imageshack.us/img143/5521/cimg0071sd6.jpg

Quote:

---

Originally Posted by defect

does the itr rear seats fit a eg perfectly?

---

You need to get:
- DB8 (4 door DC2R) bottom cushion
- DC2 (2 door DC2R) back cushions

That will make it a perfect fit in an EG.

Quote:

---

Originally Posted by Paul1985

You know what.
I dont see why you need lines off an EFi EG.
Im gonna use my carb ones.

I need rear brake lines though

---

You still need a return line.

As paul has said above those are the parts that will give you the best result in a hatch.

Quote:

---

Originally Posted by BaNaNaMaN

You still need a return line.

As paul has said above those are the parts that will give you the best result in a hatch.

---

I looked at my lines of the EG GL and there are 3.
-return
-feed
-vapour (to canister/emission control)

honbits in smithfield quoted me $400 for new fuel lines, fuel tank, fuel pump and efi wiring harness for behind the dash for my itr eg carby coversion, if you have any sort of mechanical knowlege anyone can remove the tank an lines an replace them with efi ones its the wiring behind the dash that becomes the fun part :p