Thats why i said "maybe"......Quote:
Originally Posted by blk_shadow
its not a recall, its a service bulletin. never said it was a recall either.
Correct part number is 06523 SDA A00 for the kit for both sway bar links.
Printable View
Thats why i said "maybe"......Quote:
Originally Posted by blk_shadow
its not a recall, its a service bulletin. never said it was a recall either.
Correct part number is 06523 SDA A00 for the kit for both sway bar links.
Hi there,Quote:
Originally Posted by EUR003act
Do you know if these part nos will fit the CL9 MY06?
EP3R Front red H badge 75700-S9A-600 (Will it fit the Euro R Grille for the MY06?)
DC5R Rear red H badge 75700-S5T-E11 (Are the locating holes in the trunk the same for a MY06 CL9?)
Thanks very much
as far as im aware yes, the badges are the exact same size. if you want to be 100% the measurements are earlier in this thread...Quote:
Originally Posted by Mike Star
this one im 100% on, i know because i have MY07 (same as MY06) boot on my car! :) so yes, it will fit perfectly!Quote:
Originally Posted by Mike Star
hey dude just curious got my euro R grille today in the mail, what screws do you need to use to stick the bottom trim onto the grille? and does anyone know how to get rid of that chrome trim at the top of the grille/bonnet on a stock euro?
think you need to wriggle the grill into the edges, or if you want something more secure DIY drill holes and use existing clips & holes to hold it.Quote:
Originally Posted by johnprocter
aren't there screws holding it on from underneath?
Nuts are underneath that chrome strip on the bonnet. Just take it off and then decide what to do with the chrome. Respray would be nice.Quote:
Originally Posted by johnprocter
i think my grille came with some small screws that hold that bottom strip onto the grille... if urs didnt, just go to hardware store and get some small self tapping screws.. make sure theyre not too long or theyll pierce the grille!Quote:
Originally Posted by johnprocter
as for the chrome bonnet strip, u can order new ones, (i can get you the part no. specific to your paint colour) or easiest way is to respray it yourself :)
or do what im doing, and going to get a MY07 bonnet :D
i want a CF bonnet :( with scoops so my SRI can BREATHE!!
hahahhaha goodluck on that, so much money to buy and ship one over and then you may or may not get stuffed by the cops if you haven't got it engineered either.
yeah i know thats true! anyway i gotta worry about this grille atm LOL i'll try get it installed this weekend, is it easy to DIY? or should i take it to a shop and get them to do it, i dont know how comfortable i feel taking off the bump n stuffQuote:
Originally Posted by Crapdaz
well you don't really need to take off the bumper.Quote:
Originally Posted by johnprocter
as long as your good at using your hands all you do is take off the radiator cover.
1. remove the plastic clips without breaking them. flat head screw driver and wriggle the clips gently *not plucking them out*
2. take radiator cover off
3. use your hands to feel the stock grill and you can feel 4 of those plastic clips underneath it, use flat head and pry them out gently as you did with radiator cover clips.
4. put your grill on and if you need any other ways of mounting then might have to diy but should be pretty easy.
5. if you need help with removing bumper please don't hesitate to search or ask us on ozhonda for DIY by matell or ....... can't remember the other guys name who recently installed and did a DIY on sports grill.
When it rains, your SRI will be drinking water. :pQuote:
Originally Posted by johnprocter