Front Red Honda badge for EURO R grille

[ms700]

06360 is a recall part number.

havent seen any swaybar link pins kit recall for CL9 tho.

Thats why i said "maybe"......

its not a recall, its a service bulletin. never said it was a recall either.

Correct part number is 06523 SDA A00 for the kit for both sway bar links.

[Mike Star]

Hey,

was out in the garage today sorting out parts for my K20Z cylinder head swap.. and found alot of the packaging/old parts off my car... i didnt know where to post it, but i made up a list of useful part numbers for those interested, hope this helps some people


Description Part Number

EuroR Conversion Parts

03-05 EuroR front grille 71122-SEA-901ZJ*
03-05 bonnet trim (replaces chrome) 75120-SEA-R01ZE*
CL7 front grille EuroR emblem 75732-SEA-R01
EuroR radiator bulkhead cover 71123-SEA-901
Rear EuroR badge 75731-SEA-R01
EP3R Front red H badge 75700-S9A-600
DC5R Rear red H badge 75700-S5T-E11
FN2R remote control red H backing 35114-S6M-Q11
CL7 EuroR intake manifold 17100-RBC-J00
CL7 EuroR intake manifold cover 17121-RRB-A00
CL7 EuroR rocker cover 12310-PRC-505
DC5R red engraved gearknob 54102-S6M-R00

*Note: Part Numbers for Satin Silver (replace last letter for other colours)

Lubricants, Fluids, etc

OEM Engine Oil - 5L B1767
OEM Oil Filter 15400-RTA-003
OEM Manual Transmission Fluid 06 B1710
OEM Liquid Gasket 08C70-K0334M or 08C70- X0331S
OEM Coolant - 5L B1801 (Type2)
OEM Cabin air cleaner element 80292-SDC-A01
OEM Fuel filter 16010-SDC-E01


Tools

Crank Pulley removal handle 07JAB-0010200
Crank Pulley removal socket 07JAB-0010400
Cam Chain Case handle 07749-0010000
Cam Chain Case driver attachment 07746-0010400


Non Honda Parts

Cometic K24 high compression headgasket C4311-027
Cometic K24 standard compression headgasket C4311-030
ARP K20/K24 headstuds 208-4701
Gates Micro-V belt for UR pulleys K070683
Power Rev Racing TB thermal gasket P106
Power Rev Racing TB Spacer (black) P305B
NGK Iridium spark plugs IZFR6K11

Hi there,
Do you know if these part nos will fit the CL9 MY06?
EP3R Front red H badge 75700-S9A-600 (Will it fit the Euro R Grille for the MY06?)
DC5R Rear red H badge 75700-S5T-E11 (Are the locating holes in the trunk the same for a MY06 CL9?)

Thanks very much

[EUR003act]

Hi there,
Do you know if these part nos will fit the CL9 MY06?
EP3R Front red H badge 75700-S9A-600 (Will it fit the Euro R Grille for the MY06?)

as far as im aware yes, the badges are the exact same size. if you want to be 100% the measurements are earlier in this thread...

DC5R Rear red H badge 75700-S5T-E11 (Are the locating holes in the trunk the same for a MY06 CL9?)

Thanks very much

this one im 100% on, i know because i have MY07 (same as MY06) boot on my car! so yes, it will fit perfectly!

[johnprocter]

hey dude just curious got my euro R grille today in the mail, what screws do you need to use to stick the bottom trim onto the grille? and does anyone know how to get rid of that chrome trim at the top of the grille/bonnet on a stock euro?

[Crapdaz]

hey dude just curious got my euro R grille today in the mail, what screws do you need to use to stick the bottom trim onto the grille? and does anyone know how to get rid of that chrome trim at the top of the grille/bonnet on a stock euro?

think you need to wriggle the grill into the edges, or if you want something more secure DIY drill holes and use existing clips & holes to hold it.

aren't there screws holding it on from underneath?

[aaronng]

hey dude just curious got my euro R grille today in the mail, what screws do you need to use to stick the bottom trim onto the grille? and does anyone know how to get rid of that chrome trim at the top of the grille/bonnet on a stock euro?

Nuts are underneath that chrome strip on the bonnet. Just take it off and then decide what to do with the chrome. Respray would be nice.

[EUR003act]

hey dude just curious got my euro R grille today in the mail, what screws do you need to use to stick the bottom trim onto the grille? and does anyone know how to get rid of that chrome trim at the top of the grille/bonnet on a stock euro?

i think my grille came with some small screws that hold that bottom strip onto the grille... if urs didnt, just go to hardware store and get some small self tapping screws.. make sure theyre not too long or theyll pierce the grille!

as for the chrome bonnet strip, u can order new ones, (i can get you the part no. specific to your paint colour) or easiest way is to respray it yourself

or do what im doing, and going to get a MY07 bonnet

[johnprocter]

i want a CF bonnet with scoops so my SRI can BREATHE!!

[Crapdaz]

hahahhaha goodluck on that, so much money to buy and ship one over and then you may or may not get stuffed by the cops if you haven't got it engineered either.

[johnprocter]

hahahhaha goodluck on that, so much money to buy and ship one over and then you may or may not get stuffed by the cops if you haven't got it engineered either.

yeah i know thats true! anyway i gotta worry about this grille atm LOL i'll try get it installed this weekend, is it easy to DIY? or should i take it to a shop and get them to do it, i dont know how comfortable i feel taking off the bump n stuff

[Crapdaz]

yeah i know thats true! anyway i gotta worry about this grille atm LOL i'll try get it installed this weekend, is it easy to DIY? or should i take it to a shop and get them to do it, i dont know how comfortable i feel taking off the bump n stuff

well you don't really need to take off the bumper.

as long as your good at using your hands all you do is take off the radiator cover.
1. remove the plastic clips without breaking them. flat head screw driver and wriggle the clips gently *not plucking them out*

2. take radiator cover off

3. use your hands to feel the stock grill and you can feel 4 of those plastic clips underneath it, use flat head and pry them out gently as you did with radiator cover clips.

4. put your grill on and if you need any other ways of mounting then might have to diy but should be pretty easy.

5. if you need help with removing bumper please don't hesitate to search or ask us on ozhonda for DIY by matell or ....... can't remember the other guys name who recently installed and did a DIY on sports grill.

[aaronng]

i want a CF bonnet with scoops so my SRI can BREATHE!!

When it rains, your SRI will be drinking water.