you fucking what mateQuote:
Originally Posted by Honda_FD
Printable View
you fucking what mateQuote:
Originally Posted by Honda_FD
Lol it comes out as **** when i say the F-WordQuote:
Originally Posted by lolmclol
****ing
****ed
****
****en
need ozhondie sponsor gold account to enable swearing :thumbsup:
Was gonna get some off eBay for like <30Quote:
Originally Posted by Honda_FD
http://www.ebay.com.au/itm/06-11-Civ...item5af39ab3caQuote:
Originally Posted by NeedVtec
You can. Just make sure they're a good fit.Quote:
Originally Posted by NeedVtec
I only got it from the wreckers cause they were OEM.
Are the eBay ones genuine Honda Item?
Nah they're fakes, Honda OEM are about $80 if I remember correctly.Quote:
Originally Posted by Honda_FD
Would look funny on a stock height car though
depends what colour your car is, they're pretty low profile so it might be alright.Quote:
Originally Posted by NeedVtec
Blaaaaaaackk, what ya rknQuote:
Originally Posted by lolmclol
Do it :thumbsup:Quote:
Originally Posted by NeedVtec
The black FD was a mod on here if correct. Stig.Quote:
Originally Posted by Honda_FD
Yeah. Do it. It'll look nice.Quote:
Originally Posted by NeedVtec
OEM Mate :thumbsup:
Why are there screws? There should be holes already made by factory.
You just need the clips and a small screw.
Those new screws looks massive.
yo, what's the wheel width and Offset for stock OEM honda civic 2011 vti-l models? Trying to input into a tyre calculator
16x6.5 +42?? (my guess...)
pic for reference:
http://www.webwombat.com.au/motoring...view-2-big.jpg
16x6.5 is definitely right ... offset not sure ... but definitely around 40~45
16 x 6.5 + 50 or 55
hi guys, 17x9 +22 which tyres are the best for this set up? 215/40/17 or 235/40/17
215/40/17
how about 235/40/17? Are there any problems for this set up? (on stock suspension, natural camber)Quote:
Originally Posted by lolmclol
Thanks
its a bit too chucky, thus increasing your chances of scrubbingQuote:
Originally Posted by iou
with that set up, you should go 215/45/17 you'll get that stretch on the wheels and looks nice. 40 is too thinQuote:
Originally Posted by iou
I run 215/45 on the rears. Nice natural stretch
235/40 on the front for traction
17x9 +20 all around
Stock suspension natural canberra
45 profile will feel much softer on the street compare to 40 profile?Quote:
Originally Posted by xenonkuraz
yes cause its thicker...+ less chance to buckle your rims
350z rims on fd??
17x8 +30/33
I know they fit but what ya reckon?
200 for a set, wonder if it will okay
The ones that concave in the centre? They'll look ok. Just spray them another color
get it, interested how it looks like
Flat face ones, them concave look a lot better but are 18Quote:
Originally Posted by xenonkuraz
Flat face ones are not nice. On my 350 got rid of them straight away
WTF! Where?!Quote:
Originally Posted by NeedVtec
I'll buy them if you're not getting them!
Srs
@IOU
I would go 215/40
BUT Didnt you say you wanted to track your car?
Or was that your friend? (I cant remember) If you are going for track build then 235/45 or even 255
But that will require some stiff coilovers and a reasonable height.
235 too thick..need 225 instead
even for a track car?Quote:
Originally Posted by jprak
When i got my CR Kais they had 255 on the 9" rim and it wasnt that chunky.
Quote:
Originally Posted by Honda_FD
Fires port man
LOL, now i am even more confused.
215,225,235/40,45
I understand that if i want to get the comfortable then i have to sacrifice the look or if I want to get the good look I have to give up the comfortable.
To be simple, the tyres I want are:
1) Not to thick (to get the good look)
2) Not to thin (to get the comfortable)
3) Not getting scrubbed or anything when full load
I'm thinking about xenonkuraz's set up. 235/40 (fronts) and 215/45 (rears)
Should I run 235/40 all around, any issues?
@ honda_FD: i have a set of DC5R brembo brakes. If you are interested pm me, I will give you a surprising price.
or somebody's got FD civic want to get Brembo set, pm me. (I have a special price for honda civic FD' users only, because I want to see this Brembo brakes to be installed on honda civic)
cant find it. Link please?Quote:
Originally Posted by NeedVtec
If i had money i would put these on =(Quote:
Originally Posted by iou
i ran 235/45 with 1.5 drop F and 1.4 drop R and were scrubbing.
i wouldnt have a clue on stock height but if lowered you may need 215 or 225
maybe that car was different. running 255 on our civics will scrub for sureQuote:
Originally Posted by Honda_FD
No thanks :DQuote:
Originally Posted by iou
Im saving up for a new project car. So no major mods for a while
Are you going to buy them? If not i may consider it hahaQuote:
Originally Posted by NeedVtec
*first link doesnt work*
Nah you take em man.
Lol you sure? I feel bad nowQuote:
Originally Posted by NeedVtec
Nah srs just take it this guy.
I want dc5s rims
^ only if in syd, would of sold mine to ya
got a rolling shot of my car using a rig pro lastnight.
more pics will come later
https://fbcdn-sphotos-c-a.akamaihd.n...96308224_o.jpg
Ohhhhh damnnnnn Niceee!Quote:
Originally Posted by jprak
I wanna take mine for a shoot but nothing special about it.
No one cares about a slammed FD2 on stock wheels :(
You are in Sydney, otherwise i would give you a deal on Brembo set that you might not say no, lolQuote:
Originally Posted by jprak
^ dw man im like that as well. its just plasti dip type S wheels<.<
Does anyone know if the material used for fd2r seats is the same as the material used for recaros? needa clean mine :D
im assuming you bought the FD2R front seats from tyre king?Quote:
Originally Posted by dannyhuynh
yea they're the same. just wet and dry vacuum. i just cleaned my evo 7 and FD2R rear seats last week
nah it wasnt i got it from egb a long while back :DQuote:
Originally Posted by jprak
ah ok, well wet and dry vacuum hire from kennards...did mine and turned out well :)
Yeah 235/45 will rub, 40 profiles better but it will still rub on big bumps,
Im gunna run some spacers up front on the fendrs and run 255s for ze track right after the boost goes to 10 or 12psi.
Iou id be interested but I can get new brembo calipers for alot less,, I already have s2000 rotor, pm me a price if ya really get desperate pm with a reverse lowball offer ! Lol
Nearly sold, as I told, I will sell with the best price for civic FD lover.Quote:
Originally Posted by Stevil
I dont think Im gunna get them.Quote:
Originally Posted by NeedVtec
I honestly dont think they will suit my car very well.
I might find some G35 wheels instead
http://www.350z-tech.com/wiki/images...G35_wheels.jpg
Yeah. I was talking to him about it. And he sent me a bunch of images like that to me.Quote:
Originally Posted by NeedVtec
He must really want them gone lol
I want it but I don't. Would my tyres on the oem fl rims fit these even though they 1inch wider?
What tyres do you have?Quote:
Originally Posted by NeedVtec
I ran 215/45/17 on a 17x9 rim and worked fine
Factory tyre size I guess. I'll double check though
It should be 215/45/17.Quote:
Originally Posted by NeedVtec
Theres a guy near my area selling DC5S rims.
http://www.ozhonda.com/forum/showthr...ugen-Wing-More
I managed to lowball him to $250 :D
But unsure which one to go for now
Show me what your FD Looks like. please :)
Im curious to see what type of FD's we have in Melbourne
^get type S wheels :)
I do! Stock looks boss.Quote:
Originally Posted by Honda_FD
I REALLY wanna get a rollin shot of mine one day before I piff it.
:thumbsup::thumbsup::thumbsup::thumbsup:Quote:
Originally Posted by jprak
http://i745.photobucket.com/albums/x...ps263515a5.jpg
My car looks like a 4x4!!! Defo need coils and 17's.
Bit depressing had to switch back to 98 fuel from E85 and lost 20hp and 40nm atw's !! lol
lending my car to my brother while Im up in QLD fishing, he's heading bush where E85 is non existance.
Anyone here got a stock civic sport intake that they wanna get rid of?
Same here bro.Quote:
Originally Posted by threesix
Slammed on stock wheels are the way to go!
Car looks high in this picture though. But driving it is quite
a handful. Tiny bump on the road and im smashing my frame on the ground
both front Tow Hooks have actually bent upwards. The chassis behind the front wheel
is just as bad. Just a Car Park Whore really...
http://i194.photobucket.com/albums/z...60198305_n.jpg
http://i194.photobucket.com/albums/z...04550314_n.jpg
Bone stock man. Just a regular fd sportQuote:
Originally Posted by Honda_FD
Will give him a buzz tomorrow
I haveQuote:
Originally Posted by aznboiio1
yeah, 18's make my car stand high. my car never scrapes though. i want 17x9 all around. + diiissshhh.Quote:
Originally Posted by Honda_FD
17x9 +20-35? YEA YEA?! DO IT!
only thing you might need to do is roll the rear guards but thats it.
my set up was:
BBS LMs
17x9 + 35 all round
215/45 for tyres (minor stretch)
rear guards rolled.
was on springs (1.5F and 1.4R)
perfect!
i had to get my guards hella rolled to fit 18x9 up back.
Replica mugen visors slowly stripping off haha mad flapping sounds when driving fast lolol
shouldnt happen unless you pushed it accidently like i did (my genuine ones) OR didnt clean the area properly =/Quote:
Originally Posted by dannyhuynh
Shieeeeeeeeeeeee
http://www.carpart4u.com/product/211...70RS-Dual.html
Mud flaps look fine with stock Civic IMO. I had them on my car from new. Rear ones held on with screws and one clip... front held on with screws which penetrate the fender clips.Quote:
Originally Posted by NeedVtec
Will have to let mine go in the future so the Modulo side skirts can be installed.
makes my FD2R 60RS a toy =='Quote:
Originally Posted by Baygon
Ballin'Quote:
Originally Posted by Baygon
So as you may know. My car was rear ended recently.
And because of that my xForce Twin Loop Muffler was damaged in the accident.
Since its not an illegal modification they're paying me out for a brand new one ($300)
But since they're going to deposit the money into my bank I'm thinking of putting in a
little extra for a Varex Muffler (VMK8-250) They go for $450 fitted
That way i can fart around town and then close it up when im near home.
My twin loop in fine though. It just has a cracked tip.
Thoughts?