Shit get the varex mate. Just a better investment and probably would save some head aches, literally.
Where you get the quote for 450 install?
Printable View
Shit get the varex mate. Just a better investment and probably would save some head aches, literally.
Where you get the quote for 450 install?
TrueFlow in Westwood Drive. Near DeerPark.Quote:
Originally Posted by NeedVtec
They distribute for xForce, Redback, Iron Man and all that.
Which part of Melbourne are you from?
http://www.trueflowexhausts.com.au/c...t-safety-check
West burbs, 10min from there. Was keen on getting exhaust, especially for 450 indtalled. Is it straight bolt on? Need to know if I can put my stock one back on
The Varex has a flange at the back. So I think they might have to cut the pipe that connectsQuote:
Originally Posted by NeedVtec
to the stock muffler and weld a flange onto that. Well, Thats what they did to my Twin loop.
http://www.xforce.com.au/images/VMK8-250.jpg
Any chance you got a vid of your twin loop?
Like a video of me revving and all that?Quote:
Originally Posted by NeedVtec
I'll do it later tonight when mum goes out. Dont want to rev the car when parents are home
You wanna buy it? :)
I'll sell it to you for $50
Quote:
Originally Posted by Honda_FD
How bad is the damage? Affect sound?
It just has a crack on the inside of the tip.Quote:
Originally Posted by NeedVtec
And a few scratches under because cars low.
No effects to the sound. No cracks on muffler. No exhaust leak
Overall The exhaust is slightly louder than OEM. Gives the car a deeper note though.
I'll make a short clip when mum goes out. Around 5:00pm-ish
Or we can meet up somewhere and I can physically show you.
Yeh clip would be nice, working til midnight tonight.
Not straight bolt on aye? Will need to chop and weld a flange on.
Not a flange. They'll chop off your stock pipe and then weld it straight onto the Muffler.
The Varex mufflers have a Flange
Hmm would have to hear it aye
Yeah. I'll record it tomorrow. Its too dark now and cant see the crackQuote:
Originally Posted by NeedVtec
I'm gonna cut out my magna flow and install blast pipes
Drift spec.
Alright sweet. How much you reckon they charge to re weld it on to mine?Quote:
Originally Posted by Honda_FD
You can see a little crack on the tip. But it wasnt very visible as i recorded it on a iPhoneQuote:
Originally Posted by NeedVtec
Might cost around $50 to install. depending where you go
http://www.youtube.com/watch?v=Dw_AWLLJOo8
saw ya at the meet at oakleigh and chaddy meet :P
Can someone who has actually done this tell me if it is possible?
Fitting non airbag seats but still having front and curtain airbags working?
What's needed if yes?
http://www.jdmconcept.com.au/part/br...-bag-cancellerQuote:
Originally Posted by xenonkuraz
The air bag canceller is a solder-on (for you to do) airbag warning light canceller when installing aftermarket seats. Based on the ohm of the standard sensor, you need to buy the correct one. See your factory specs for which you require!
not sure if it'll trick the ecu or not.
research into it more..
What was cut and welded? My stock exhaust + cash on top? Since you're gonna get a varex anyway?Quote:
Originally Posted by Honda_FD
I dont really want another exhaust in the garage :SQuote:
Originally Posted by NeedVtec
As my stock one is just sitting there collecting dust
I just ordered the Varex today and its taking a day or two to arrive.
So if you want the Twin Loop maybe you can meet me there and do it at the same time.
Saves time and money
Is your FD Sports model?
Also, Can you please pm me your phone number?
Makes it easier to talk instead of going through OzHonda
That was my brother lol.Quote:
Originally Posted by kikimushroom
He wanted to go but i didnt so he took the car.
Its so weird driving it that high. My eye level is way off.
$40 for a resistor, no thanksQuote:
Originally Posted by jprak
Does anyone know whether the FD2R shocks & springs are a direct fit on the FD1? And what is the height difference between a VTI-L model and the FD2R?
get the FD3 set up. lower than all.
or man up and get coils. :)
can i have you FD2 exhaust? xoxo (really)Quote:
Originally Posted by Honda_FD
maybe more stiffer and abit low but too much nicho, buy springs and put them on. i had that set up but sold my springs to my mate for type S wheels.Quote:
Originally Posted by nicho
unless race car - springs.
go bags :)
woolies or coles?
coles, environmental ones (Y)
Lol Im gunna keep it.Quote:
Originally Posted by threesix
Just in case i wanna return the car back to stock. . .
. . . One day
I'll give away my one
http://i1301.photobucket.com/albums/...ps5813ae2a.jpg http://i1301.photobucket.com/albums/...ps110b8ce6.jpg
Drove up to the central coast like that scraped almost on every left turn sounds so bad it hurts lol
can also see the crack on the rear lip i mentioned before >:|
^ needs more low
Hi guys : )
Would anyone be interested in my bags if I part out my car?
Ohh heres an update on my car btw! No major changes haha.. Took off black plastidip from grille and took off the yellow tint from my foggies!
http://i39.tinypic.com/1zoaiid.jpg
http://i39.tinypic.com/2dbo3ef.jpg
http://i44.tinypic.com/20z5mx0.jpg
could ya pm me the price jamie, might get another set. jks ill ask a mate if hes interested :)Quote:
Originally Posted by j_me
Nice wheels, ive been running type S for a while kinda bored of them and need dish wheels asap =(
Hey johnnayyy! Another set?! are you bagged now!!!Quote:
Originally Posted by jprak
I shall pm you when I hop on the laptop cause my phone sucks. Yeah I love my rims but I know I'll get hacked on for running replica bbs' haha :( oh well. Couldnt pass up the sizing!
yea, i swapped Aries for my Genuine BBS LM's 17x 9 + 35 all round, he made it so beautiful from 35>20 +gold bolts all around, polished lip and fix gutter rashes.Quote:
Originally Posted by j_me
its ok i thinking the same till i get abit more $$ for real ones but who knows :)
@ SharkChu - Your inbox is full! I can't reply to you!! haha
OOOOOOH I didn't know he swapped with you! That's awesome!! How are you liking the bag setup?! Yeah I want to save for real rims but I'd rather spend it on my next car! Trying to part out to have the car gone by the end of the year :( Fingers crossssssed!Quote:
Originally Posted by jprak
My rims now are 17 x 10 +15 all round! D: I'll PM you now :)
Lol Is that the lowest settings?Quote:
Originally Posted by dannyhuynh
You need 215/40 tyres
Update:
I need to remove a resonator. Car isnt even loud :(
http://i194.photobucket.com/albums/z...03785967_n.jpg
pm replied, let me know if ya wanna sell the rims and goodluck parting out :)Quote:
Originally Posted by j_me
Pm'd jmee
^ DO IT 3sex
anyone wanna buy some Viennas?
Nah ! not even the lowest setting too much weight in the car lolQuote:
Originally Posted by Honda_FD
Can we get some day time photos of your car Jamie? Preees
another rig shot of my car unedited:
https://fbcdn-sphotos-a-a.akamaihd.n...15348302_o.jpg
Dude! Your car wins!!!!!!! Everything!!!!!!
You can't buy style. Your born with it.
Also, where da FVCK is jameeeee!?
Please stop! You're making me jealous!Quote:
Originally Posted by jprak
Quote:
Originally Posted by jprak
Holy crap! Your car looks so good!!! Are you going tmoro?
Hahaha I'm here!!! I'll get a day time shot of it at tomorrows meet :)Quote:
Originally Posted by threesix
going today but not bringing car as its not worthy compare to yours :(
Rpm'd you jmee bout rims....
LOL wtf $40 for a resistor??Quote:
Originally Posted by jprak
holy damn.. i'm in the wrong industry
Y so quiet?!
can we fit spoon calipers on FD civic guys?
Vid of that exhaust pleaseQuote:
Originally Posted by Honda_FD
In the morning :)Quote:
Originally Posted by NeedVtec
Just found this..
http://firesport.com.au/js-racing-fd...--ad239793.htm
Will do unspeakable things to anyone that buys it for me!
Pick it up! I got Js FD2R exhaust, i like the sound of it. Very different :)
Daytime pics from yesterdays meet :D
http://i41.tinypic.com/6qut13.jpg
http://i43.tinypic.com/2e52hjr.jpg
http://i44.tinypic.com/21npo2a.jpg
http://i40.tinypic.com/21oosqr.jpg
If you guys know anyone who wants to buy my car as is, spread the word :(
Quote:
Originally Posted by Honda_FD
He's been trying to sell it here for a while now. 900 for catback, that's crazy. Baller spec
Hi milk
@NeedVtec
Exhaust opens at 0:20
http://www.youtube.com/watch?v=yBe7OZIRECg
Would it sound similar on an auto FD1? hm... I like.Quote:
Originally Posted by Honda_FD
any car thats auto with exhaust = 1000 sad faces :(
Auto, Manual. Same shit.Quote:
Originally Posted by SharkChu
Driving with an Auto is very... "Fart" like and Drones on the freeway.
Also, You got that one constant note through all the gears cause you
dont have the Accelerator off + Clutch sound
Other than that. Sounds the same.
Not sure if the R18 and the K20 has a different sound or not though.
That's what I'm afraid of, lol. guess it will stay stock =[Quote:
Originally Posted by Honda_FD
@j_me looks beautiful !
Varex :)Quote:
Originally Posted by SharkChu
Close it on the freeway
If you get a muffler only it will sound better. Muffler only isnt loud at all.
Dives the car a deep note but doesnt fart or drone.
Booked it in tomorrow at true flow thanks for everything manQuote:
Originally Posted by Honda_FD
Quote:
Originally Posted by j_me
needs more low :P
nice seeing the car in person. only saw it when your bf drove it in. was in line waiting for sausages w/ dirt seasoning
so like what cars have you guys ran against and what were the results?
On a private road/race track of course
Can't keep up with a euro, was about 2 car lengths behind going about $1.80
Slowly pulled on a ft86 to about 1.50
Mrs JMEEEEEEEE. I neeeeeeeed those wheeeeeels!!!!!!!
3sex wants stance to make girls danceQuote:
Originally Posted by threesix
i had a really old bloke come up to me and say what offset and camber are you running? no shit!!!
he looked to be well into his 60's
nek minut, old man drives an Bagged FD civic with epic camber ;D
Bet my mums Corolla :DQuote:
Originally Posted by NeedVtec
Rolling start though. But Stop Start Corolla pulls untill 2nd gear
Cars too low to be racing now
...so looks like it is time to part with some parts of my car, RR spoiler and CF bonnet if anyone wants
^ whys?! =(
got pic of bonnet?
Quick question would 2009+ rear bumper fit on the 2006 model?