wiring up angel eyes

Quote:

---

Originally Posted by Bludger

every step you said sounds so dodgy

---

lol of course man..

but it works :D

do you guys know if one angel eye decides to get lazy, is that the globe running low?
http://i93.photobucket.com/albums/l4.../angeleyes.jpg
easy fix?

check the output on power on the line with a tester.. compare to the right handed side...

if its weak then you gta look at the problem.. ie another item feeding of the line or something..

how did u wire it?

im buying some 99-00 angel eyes off someone cheap cause one angel eye is a bit lazy and im gonna butcher it for parts (cause mines a 96-98 civic) to retrofit my headlights. so im just trying to sus out exactly how to fix it :)

Quote:

---

Originally Posted by XP02ED

if its weak then you gta look at the problem.. ie another item feeding of the

---

i wouldn't think thats the problem.

even if something else is running off it, it wouldn't go dimmer.

can i simply replace the globe? they hard to source?

Quote:

---

Originally Posted by Bludger

here is the thing
stock ek is h4 i think

H4, is a single bulb setup so therefore, when low beam is on, high beam is off and when high beam is on, low beam is off.

---

sory to hijack but i have double bulb setup where i have a different globe for high and low beam. ive recently converted them to single so when high beam is on they're both on. is there any harm in this?? i didnt think there was but your post worried me :p

Quote:

---

Originally Posted by ucme

sory to hijack but i have double bulb setup where i have a different globe for high and low beam. ive recently converted them to single so when high beam is on they're both on. is there any harm in this?? i didnt think there was but your post worried me :p

---

what single bulb is it?

sinlge H4 bulb, i wouldn't recommend doing this cos if both are on, its going to be ****en hot inside the buld and could/may damage things.

Quote:

---

Originally Posted by steve88

can i simply replace the globe? they hard to source?

---

lol

what bulb is it?

i wouldnt know i have never seen an angel eyes in my life. is it 2 bulbs? is it 1 bulb
i dotn even know what powers the projector or lights up the angel eye :)

ERR WTF. what globes.. angel eyes dont use bulbs.. they are LED.. and if its broken.. or dimm.. and it aint the power.. u need to replace it.. BIG JOB.. rather buy another set

shit you serious. i thought the rings just had a light source behind them that lit them up. it wouldnt be such a big job for me because im actually pulling apart the headlights, but i wouldnt know where to start to find the rings