ek centre console into an eg

Great stuff, keep it up dude!

i did this a couple of weeks ago,, perfect,, more compartments for me!! and its stable doesnt move will take pics soon..

Quote:

---

Originally Posted by slow_poke

I'll put up some pics when i find my camera. Also unfortunately no arm rest.

---

Fixed mine up fukn looks great but i put the whole ek centre console including part for the handbrake so i have another pocket were the handbrake lies LOL, thanks for the DIY finally i can put my shit somewhere hahaha
thanks again

including part of the handbrake?! pics pls!

Quote:

---

Originally Posted by cnez

including part of the handbrake?! pics pls!

---

When i get the camera i will, it's snug onto the clips at the end of the console.

here is my whole ek centre console in my eg
Note: diy was messy i still need to sand the top LOL

ahahah it's alright clem, we have our teg boxes for that

Quote:

---

Originally Posted by slow_poke

here is my whole ek centre console in my eg
Note: diy was messy i still need to sand the top LOL

---

that looks sweet.. did u made any modification?

well i pick up a centre console with arm rest from the wreckers for the EG so that a combo wit the EK console in my eg,, more compartment and arm rest is gud when ur not shifting gears!! :)

bad points is that the one i picked up doesnt hav ashtray and it has a small cracked, but its aight i guess :)

ok i understand tat you only need to sue ek console gear part

but every wreakers i went there no ek console with cup holders?

plus what models armrest will fit on eg? do i have to mod it to fit it on?

Quote:

---

Originally Posted by rey2009

ok i understand tat you only need to sue ek console gear part

but every wreakers i went there no ek console with cup holders?

plus what models armrest will fit on eg? do i have to mod it to fit it on?

---

i used the eg arm rest from civic SI's doesnt have to be eg6,, it does the job :)

thanksss

Did this today. Kinda screwed the eg center console up tough, shouldn't have cut the sides of. Just the middle section but o well it ain't noticable. Also put the EK arm rest in and it looks gangsta, made the top lip on the EK center console sit under the eg coin pocket where I cut for another anchorage point for EK one. And instead of ugly non stock screw holes, I used the plastic I cut, to make plastic " brackets that screwed into the stock EK screw holes and allowed me to cable tie it all down to the stock eg mounts. It really is stuck down well and looks good + no more loosing my coins and phone. Only complaint is the gap on each side up front but meh, nothing some silicone and vinyl can't fix. Might do an updated DIY on filling the gaps when I get more time