DIY PGMFI Fuel Filter Change

make sure your turning it the correct way,

anti clockwise to undo

^^ that too. :)

... how do you prime the fuel pump?
or wat ever it was in the 1st post before you start the car

turn the igniton on to pos II, then off and on again a few times

Quote:

---

Originally Posted by aaronng

Take 2 spanners, place one on the filter side and the other on the nut on the fuel line. Arrange them so that they form a squeezable angle. With your left hand, hold the heads of the spanner in place so they don't fall off the nut and filter. With your right hand in a leather gardening glove, squeeze as hard as you can. Don't worry, you will be able to get it loose. I'm a thin guy, and by squeezing I managed to get it off, while twisting the metal on the nut!

---

oh really.. dang. its kinda hard because i didnt have good angle to turn it. not sure anymore.

Quote:

---

Originally Posted by ECU-MAN

turn the igniton on to pos II, then off and on again a few times

---

for the noobs, posII is when all the dash lights come to life right before you kick over the motor.

hey ECU-MAN do you like have a mechanic shop here in SA or do you do everything at home. If like people payed you would you do an engine swap for them cos i wanna buy a new engine soon.

Ill PM you dude