Ah wetherill park. nice and close!
thx aaronng
Printable View
Ah wetherill park. nice and close!
thx aaronng
And if my vicegrip are broken
http://www1.istockphoto.com/file_thu...087_pliers.jpg
Is there anything else i can use to remove it?
I have another one that works REALLY nice, but its abit too small for the bolt -_-
no really, guys i think im right here. its STUCK.
I can get the socket on it good, and doesnt matter how hard i pull on it, NOTHING. It just wont move no matter what.
The socket doesnt fall off or slip or anything.
yeah get one of these. dunno what it's called but it works a treat. basically put it on the bolt and pull. the harder you pull the harder it grips.
http://i214.photobucket.com/albums/c...e455/tool2.jpg
http://i214.photobucket.com/albums/c...e455/tool1.jpg
Hmm might have one of those in the garage. Ill take a look in a minute,
But it doesnt matter how hard i tug with the socket, ( i am tugging pretty hard )
nothing....
get a hole saw and drill it out.:p
yea im about to. this thing is shitting me.Quote:
Originally Posted by gnx1987
If its not out tonight im taking it somewhere tomorrow...
lol
lol
are you serious?
where are you located?
get that tool i told you and put a really long pipe on it to increase your torque. it should come out unless someone welded it in. No offence but are you sure you trying to turn it in the correct direction? If your lying down on a wierd angle it might look like your going counter clockwise when in fact your not.
Lol trust me. im going write way.Quote:
Originally Posted by gnx1987
Im from wollongong/sydney (hinchinbrook)
But im at wollongong atm...
$10 says no here could get the pos off, lol
lol
**** it would be funny if you were goint the wrong way
ah, i was about to give you some help
lol
but way too far
lol
Dont use vice-grips or such to take it off, they will just ruin the head. Use a quality peripheral drive socket and long handle, and put a pipe on the handle.
Also, you should use half-inch sockets, anything less is for girly men.
Quote:
Give me a lever long enough and a fulcrum on which to place it, and I shall move the world.