no really, guys i think im right here. its STUCK.
I can get the socket on it good, and doesnt matter how hard i pull on it, NOTHING. It just wont move no matter what.
The socket doesnt fall off or slip or anything.
Hmm might have one of those in the garage. Ill take a look in a minute,
But it doesnt matter how hard i tug with the socket, ( i am tugging pretty hard )
get that tool i told you and put a really long pipe on it to increase your torque. it should come out unless someone welded it in. No offence but are you sure you trying to turn it in the correct direction? If your lying down on a wierd angle it might look like your going counter clockwise when in fact your not.
get that tool i told you and put a really long pipe on it to increase your torque. it should come out unless someone welded it in. No offence but are you sure you trying to turn it in the correct direction? If your lying down on a wierd angle it might look like your going counter clockwise when in fact your not.
Lol trust me. im going write way.
Im from wollongong/sydney (hinchinbrook)
But im at wollongong atm...
Dont use vice-grips or such to take it off, they will just ruin the head. Use a quality peripheral drive socket and long handle, and put a pipe on the handle.
Also, you should use half-inch sockets, anything less is for girly men.
Give me a lever long enough and a fulcrum on which to place it, and I shall move the world.
Reply With Quote
Originally Posted by gnx1987
Bookmarks