Wheel size for DC5S?

Quote:

---

Originally Posted by Chi

You must have a reason for your opinion.

You cant just give a opinion based on crap now can we?

Obviously you have no idea why its good lol.

And if you bothered to read other peoples reply, they are also questioning why your opinion of the offset is good.

Which you still cannot answer.

---

I already said millions times I've personally used and tried. +43 offset is from my own observation.

You must got reading incapability.:( Feel sorry for you:eek:

Quote:

---

Originally Posted by kongfu

I already said millions times I've personally used and tried. +43 offset is from my own observation.

You must got reading incapability.:( Feel sorry for you:eek:

---

Ok so what did you observe?

What did you like about that setup? Improvement?

Quote:

---

Originally Posted by EKVTIR-T

Ok so what did you observe?

What did you like about that setup? Improvement?

---

I upgraded OEM 16 to 17x7.5 +43 offset CE28N.. with JDM front end BREMBO BRAKE CONVERSION.

I think there are about 30mm gap between CE28N spoke and brembo calipers.

I feel the car is completely a different car. Camber setting is negative 2.5.:wave:

Quote:

---

Originally Posted by kongfu

I upgraded OEM 16 to 17x7.5 +43 offset CE28N.. with JDM front end BREMBO BRAKE CONVERSION.

I think there are about 30mm gap between CE28N spoke and brembo calipers.

I feel the car is completely a different car. Camber setting is negative 2.5.:wave:

---

Is your opinion of "+43 is the best offset" based upon the fact that you've previously run that setup before, which is why you think it is the best, or is there some kind of supporting evidence that your hiding from us?

Quote:

---

Originally Posted by mugsee

Is your opinion of "+43 is the best offset" based upon the fact that you've previously run that setup before, which is why you think it is the best, or is there some kind of supporting evidence that your hiding from us?

---

you think whatever is the best then its the best. No need to dicuss anymore.

Quote:

---

Originally Posted by kongfu

I upgraded OEM 16 to 17x7.5 +43 offset CE28N.. with JDM front end BREMBO BRAKE CONVERSION.

I think there are about 30mm gap between CE28N spoke and brembo calipers.

I feel the car is completely a different car. Camber setting is negative 2.5.:wave:

---

Ok now I know you are full of crap for sure.

Why? , because I have this exact setup and I can tell you there is no way it is 30mm clearance from the caliper to the spokes.

quit it lads... peace yooo

Quote:

---

Originally Posted by SiReal

quit it lads... peace yooo

---

Time to close this thread Jeff.

i would much love to but i dont have mod rights...

just take it easy guys.. its over offset and rims, no need to take cars/mods so seriously to name call/offend ppl . :)

closed/.