it will be cheaper than getting it off jay from xposed
Printable View
it will be cheaper than getting it off jay from xposed
just wondering if there is a k&n replacement filter for the mugen airbox?
Damn those mugen filters are exxy lol
^ did you get the one with black headlights and ambers from IMG? lol
Black lights? Pics?
it should look like black housing with orange ambercorners. mugen headlights for the ep3. i'll have a look in my phone for a picture remember taking it when i picked up my car
I think he didQuote:
Originally Posted by wtfhax
Hi, I've got a few simple questions about EP3's.
Do these cars have cruise control?
If not, has anyone on here fitted/had one fitted?
If you have, what brand?
Cheers,
Bob
No.Quote:
Originally Posted by beohbe
not sure.
unknown.
sorry Bob, that's all i know.
Cool, the first question was the important one, the rest were just hopeful ones.:thumbsup:
Cheers
I have dealt with these guys before....Quote:
Originally Posted by beohbe
http://www.cruisecontrols.com.au/prod-cc.html
Extra cool.....I'll probably have to do a self-install when I get the car (months before I actually commit, this is all research).
Thanks again.
Anyone keen on a meet up this weekend if it doesnt rain?
sunday would b alright with me :D saturday looking a lil busyQuote:
Originally Posted by Perry
If it doesnt rain on Sunday I"m going on a bike ride with some fellows on here.Quote:
Originally Posted by SuperSteve
what headers do you guys have?
and what do they give i.e. low end/high end torque etc :D
im tossing up between buddyclub or j's racing headers
was looking at this thread
http://www.s2ki.com/forums/index.php?showtopic=634406
but they dont give much info on anything...its mostly a list of what you can choose from.
with JDM stuff, most people run Toda. a few people have Spoon and J's and the baller ones have Maxim Works lol
some ppl run T1R, DC sports etc but not much info on JDM EP3.
depends on the design, it think most give improved mid range. u'll probably have much better result with catback + retune.
I'll toda but J's catless headers is tempting but its going to be loud.
just purchased some kiddracing header, willing to give them a go! I'll let you know how they go :D
If it's pedal bike ride, I would consider it, but if motor, then I'm out!..LOL...Quote:
Originally Posted by Perry
I had j's on my car and yes they were loud! But I also had a catback which prob didn't help. I felt that they gave me more high end but not sure.Quote:
Originally Posted by Perry
anyone can answer whether will need camber for 17/8/+38 rims for our cars....
Quote:
Originally Posted by white_ep3_civic
HOw bad was it?
U probably need a little at the front. This is a pretty good spec, what r u getting?Quote:
Originally Posted by ITRDC2
Just cruising it pretty quiet but as soon as u put ur foot into it, it screms.Quote:
Originally Posted by Perry
oh,but I heard most likely front will be fine just need to adjust the rear,but thx for ur info,just bought a set of ce28n in bronzeQuote:
Originally Posted by Philip Lee
just like my headers aswell. idle and normal driving its fine. really hear the difference when u put the pedal to the metal. not that i do thatQuote:
Originally Posted by white_ep3_civic
You never show me steve Hoon King hehehe :thumbsup: I might be in the area later today want to meet up finally getting my visors.Quote:
Originally Posted by SuperSteve
did you lose any/much low end torque?Quote:
Originally Posted by white_ep3_civic
stock front has very little camber but rear has some.Quote:
Originally Posted by ITRDC2
and rear can fit more aggressive offset than the front as it has lots more space. u can roll the rear guard but u can't for the front. this is my personal experience.
Serious u can rolll the front guards?Quote:
Originally Posted by Philip Lee
Did you guys need to get an aftermarket ecu when you got aftermarket headers?
You dont have to have a ECU changing headers, exhaust, intake.Quote:
Originally Posted by wtfhax
I'll be down at KK's around 7pm post here if u coming down for a chill.
I'll be in the city tonight if you want to come out and chill...LOL... :p
kk's at livo ??
there isn't a metal lip at the front to roll like the rearl. u'll need to take the plastic guard off or cut some of it.Quote:
Originally Posted by Perry
if i have spent the $$ on intake, header and catback, i'll invest on a ECU for maximum gain for the setup.Quote:
Originally Posted by wtfhax
but to answer you question, you don't need to.
Quote:
Originally Posted by Philip Lee
Thx but I did research buddy club only make rear camber kit for ep3...
What do you guys with the CW do with small chips and scratches in the paint? Is there a CW pen we can get here?
Mines dead quiet at idle and under 3k's, but above it starts screaming. Problem is during cold starts it is quite noisy, only after a few minutes does it become quiet, do you get that too?Quote:
Originally Posted by SuperSteve
Na not really felt the sameQuote:
Originally Posted by Antv
I had cat back, headers, intake and ran the standard ecuQuote:
Originally Posted by wtfhax
Haha from wat I've heard u Neva give ur car a hit lolQuote:
Originally Posted by SuperSteve
touch up paintQuote:
Originally Posted by mizone
yeah thats cause at cold start ur car idles abit high, and because i this i think my neighbours at me when i have early start for work and i get up early hahaQuote:
Originally Posted by mizone
yeah ! tru story !Quote:
Originally Posted by white_ep3_civic
Not true at all.Quote:
Originally Posted by SuperSteve
Becos many coilovers have pillow ball upper mount at the front or U can get camber bolts.Quote:
Originally Posted by ITRDC2
but I don't have coilcovers atm.....Quote:
Originally Posted by Philip Lee
U can use camber bolts up front.
Ingalls produced them.
hey phill i got my t1r inverted tie rod ends put on. Steering feels alot better now. At first it felt weird cause it was lighter but feels awesome now :) now im waiting to see how they hold up.Quote:
Originally Posted by Philip Lee
steve how do you yank out the scuttle, are there clips ? planning to install my gruppe m might aswell put it to good use.
cool steve. let me know how it goes. if it starts to develop play.Quote:
Originally Posted by SuperSteve
if its all good, i'd install a set.
did you put anything to protect the ball joint?
cheers
yeah the stock scuttle if i remember correctly had some clips you take off. Few years ago now cant really remember >_<Quote:
Originally Posted by JohnO
nps will let u know how they go in a month. I drive my car 7 days a week and im going to track day so that should really test them out :thumbsup: nope i didnt end up putting any protection i really couldnt b stuffed waiting anymore lolQuote:
Originally Posted by Philip Lee
Hey, I was thinking......how about you wrap the tie rod ends with condoms.....aye.....feelin it!!Quote:
Originally Posted by SuperSteve
rubber insulated plus lubbed. i am feeling it !Quote:
Originally Posted by Nepolian
hey guys just wondering if installing intake+headers+exhaust affected your mileage...
assuming the engine is breathing in more air and the ECU adjust accordingly, i'd say yes.Quote:
Originally Posted by wtfhax
Anyone around Frenchs Forest this morning?
god I hate recaro seat bolsters lol
anyone creasing their driver's thigh bolster?
one more thing will, 17 x 8.5 offset +30 fit ep3r?
In short no. Need lots of camber..........lots!
Will look tough though!
btw here is the ep3r in question
http://farm3.static.flickr.com/2688/...f88ae90d_o.jpg
is that the one with mugen headlamps+mugen bumper???
oh guys im getting tonnes of brake dust on my wheels should i change pads? dont know if the pads i got on are cheapy or not
Lol isn't that oem bumper?
Btw guys need suggestion, what you guys think of j's ecu, since I'm got 60rs and maybe going to get j's headers.. Good worth $1000?? Or am I better off with kpro and tune.. Spending 2k?
It's the Mugen bumper. You're thinking of the Mugen lip.
That's the stock bumper with mugen radiator duct.
Did mugen do headlights too?
for me, i dont think so
Its only mugen radiator airflow duct what ever you call it.Quote:
Originally Posted by denrie
yeah but i want :)Quote:
Originally Posted by Perry
ahhaha I've been bugging for it since the day we expected it love the rice mods.Quote:
Originally Posted by Philip Lee
yeah but bit scary cutting the bumper for it...
Tell me about it got to cut it right too or GG.Quote:
Originally Posted by Philip Lee
so Perry, how did you go with your little "mods"?
any pic?
Havent put them on yet been forced to cook dinner lately :( will try to get some up tonight.Quote:
Originally Posted by Philip Lee
u cooking rice? hahaQuote:
Originally Posted by Perry
ahahah thats the only thing i can cook probably and chicken.Quote:
Originally Posted by Philip Lee
Haha u fail ! mi goreng ftw !Quote:
Originally Posted by Perry
Nah dont wnt to touch instant noodles not healthy for you laa.Quote:
Originally Posted by SuperSteve