Printable View
hi all,
installed my foglights into my eg hatch today, i know the switch is getting powr because its lighting up when i push it in, but the fog lights will not come on, i think it may be the relay because its not making a sound when i click the interior switch, any ideas?
are u in melb? if u are ill help you do it.
need a bit more info, does the switch supply ground or +12v, how have you wired the relay, check the pins and let us know
is this genuine or aftermarket harness?
genuine will have two connectors to power under the dash + 1ground and one to the switch the aftermarket will ahve 1 connector and 1 ground, the other end goes direct to the battery for +12.
suijin i pm'd you
why not post all details here?
ive got the same issue!
i suspect its my grounding but have yet to fix this,.
heres what mine looks like,
http://i73.photobucket.com/albums/i2...a/Untitled.jpg
oem style fog light with aftermarket harness and so on.
although it only shows 1 ground, there might of been another ground attached to the other light (so one each) but i forgot.
the fuse and the relay may of been the other way around, but thats generally my set up
suijin i pm'd u man, in the meantime im going to go see if an auto elec is open today...
mine is an ebay one..so aftermarket, i have one earth in the engine bay and one earth inside under dash, im getting power to the interior switch but cannot hear the ticking of the relay so im assuming that the power is not getting to the relay, and i doubt that a brand new relay could be faulty...
obviously your not getting power to the relay. make sure the coil side of the relay has power either by accessories or ignition. and make sure the other end of the coil is properly grounded.
his kit has two grounding points, dw we're remaking the harness :D eg6 harness conversion.
care to give me a detailed description of what i need to do suijin?Quote:
Originally Posted by SuiJin
i believe mine is the same as the OP's.
same ebay kit!
i bought mine off a user on here, but its an ebay kit too. i re-did the wire loom so i wouldnt have cables that could be seen in the engine bay. its fairly easy.
though one thing that gets me puzzled. the OEM switch has:
-1x red/yellow
-2x red/black (crimped together)
-2x black.
there are more cables in the OEM switch than the EBAY switch. anyone know what cables are3 for what?
thanks suijin! a huge help man :) i might take it out sometime monday so let me know when i can drop it off
Care to give a explanation to those that need it rather then ignoring kcokla ?
hehe foglights done and installed. :D
yep all done, moral of the story is dont buy foggies from ebay :)
oem eg6 harness n foggies sitting here atm. as kcokla said, the button has the 5 wires.
the harness itself doesnt seem to have a relay on it. the harness is made up of 2 wires, a blue/red one and black (grnd).
suijin care to shed some light with a diagram of how the eg6 harness should be all connected?
ps ; theres another ground at the switch , except i forgot to draw it.
i installed the lights with the wiring i have drawn but it hasnt ever worked and has been sitting as is for sometime.
recheck the wiring again id say
as mentioned above, i too have a set of foglights that i am meaning to install. my problem is that i dont know how the wiring should be. these are oem eg6 foglights and for some reason there doesnt seem to be any sort of relay on the harness.
its not aftermarket like kcoklas but i'm sure both can be sorted out if someone can drop some knowldge.
post pics up, even without mine working perhaps i/and others can suggest something to ese what you've actually got/and maybe missing!
yeah man get some pics up of the wiring
ive gotten mine done;Quote:
Originally Posted by cnez
heres a diagram how it should be -
http://i73.photobucket.com/albums/i2...a/Untitled.jpg
this link may also help:http://www.honda-tech.com/showthread.php?t=2526151
ok - take note
the fuse area thing -
it should go in the 2nd slot from the RIGHT hand side - and they only turn on when your parker lights are on - be aware(accessory slot)
there is also a grounding which i havent drawn in the same spot as the switch/accessory slot.
if you have that setup, i dont see why it wouldnt work.
If they still dont;
check your grounds,
check the slot
check the relay (does it even get warm? if so theres obviously power going through)
another test you can try :
unplug one of the foglights and see if one out of the two works, and try it both ways.
if it ever does work (one of them) ibelieve your fuse will blow which you can replace, and then you've found the problem with the wiring on the foglight plug itself may be bad/not very good. Make sure the wires go straight in and arnt exposed to the metal bracket
any problems feel free to pm me, ill try my best
What was my problem? i had it plugged into the wrong accessory the entire time(mis-read other DIY's and was reading up many last night only to realise it took a simple change!! stupid me!)
awesome post.
i should have a relay with the stanley foglights correct? i dont seem to have one....
well done
im not sure if you'd get one because you have a real oem one :(Quote:
Originally Posted by cnez
but if your wiring is similar to that minus the relay, i guess you could try that!
to ppl interested,
found wiring diagram of the oem harness. heres what i used:
http://docs.google.com/File?id=dgw2d6hg_175fxxsgrd2_b
used 4mm wiring all round (10 or 15amps if i can remember), should be fine as its thicker than aftermarket so i should be safe from fires :P
bought a 12V 30 amp relay from jaycar as i couldnt be bothered salvaging/ searching for a mitsuba relay. same difference.
on a side note...after working for 5 minutes or so, the jdm foglight button as decided to kill itself and now doesnt 'click' in by itself. after opening the button i cant seem to find anything wrong with it, theres no shortage...its a button all it is made of is 2 small bulbs and a switch.
any ideas? cause of an overload of power or just bcuz the button is in bad condition? as far as i can see the inside looks exactly the same as the rear demister button, except the demister actually clicks.
do the lights come on when you press the button, then go off when you take your finger off the button? if this is so, then your relay is fine so then the problem lies at the switch. could be that the switch latch mechanism has broken.
the button doesnt work at all anymore. it is as if the connection/circuit is broken. ive tried a spare demister button as well an the same thing has just happened. i'm certain its not the button now, which means theres an issue with the wiring.
problem is...it all seems right. its exactly the same as the above oem wiring diagram. most likely is the relay i guess. it is wired up correctly to the relay. does anyone know the specs on the oem relay? the jaycar one is rated 30amps, 12v.
can you hear the relay "click" when you press the switch? maybe you just mismatched the wires going to the relay, as it could be different for the jaycar relay.