Page 2 of 3 FirstFirst 123 LastLast
Results 13 to 24 of 30
  1. #13
    Newcomer Array
    Join Date
    Nov 2009
    Location
    melburn city
    Car:
    eg hatch
    thanks suijin! a huge help man i might take it out sometime monday so let me know when i can drop it off
    eat the rice with your spoon

  2. #14
    Member Array
    Join Date
    Jul 2007
    Location
    JDMD15B
    Car:
    14EGs/8EDs/3EKs
    Care to give a explanation to those that need it rather then ignoring kcokla ?
    JDM D15B - you wouldn't understand

    No K-SWAP ? No worries - Unfriend

  3. #15
    Member Array
    Join Date
    Dec 2007
    Location
    Melbourne
    Car:
    1992 Del Sol
    hehe foglights done and installed.

  4. #16
    Newcomer Array
    Join Date
    Nov 2009
    Location
    melburn city
    Car:
    eg hatch
    yep all done, moral of the story is dont buy foggies from ebay
    eat the rice with your spoon

  5. #17
    Member Array
    Join Date
    Jan 2009
    Location
    garage
    Car:
    eg4
    oem eg6 harness n foggies sitting here atm. as kcokla said, the button has the 5 wires.
    the harness itself doesnt seem to have a relay on it. the harness is made up of 2 wires, a blue/red one and black (grnd).

    suijin care to shed some light with a diagram of how the eg6 harness should be all connected?

  6. #18
    Member Array
    Join Date
    Mar 2008
    Location
    SYD-SG-JPN-MY
    ps ; theres another ground at the switch , except i forgot to draw it.

    i installed the lights with the wiring i have drawn but it hasnt ever worked and has been sitting as is for sometime.

  7. #19
    Newcomer Array
    Join Date
    Nov 2009
    Location
    melburn city
    Car:
    eg hatch
    recheck the wiring again id say
    eat the rice with your spoon

  8. #20
    Member Array
    Join Date
    Jan 2009
    Location
    garage
    Car:
    eg4
    as mentioned above, i too have a set of foglights that i am meaning to install. my problem is that i dont know how the wiring should be. these are oem eg6 foglights and for some reason there doesnt seem to be any sort of relay on the harness.

    its not aftermarket like kcoklas but i'm sure both can be sorted out if someone can drop some knowldge.

  9. #21
    Member Array
    Join Date
    Mar 2008
    Location
    SYD-SG-JPN-MY
    post pics up, even without mine working perhaps i/and others can suggest something to ese what you've actually got/and maybe missing!

  10. #22
    Newcomer Array
    Join Date
    Nov 2009
    Location
    melburn city
    Car:
    eg hatch
    yeah man get some pics up of the wiring
    eat the rice with your spoon

  11. #23
    Member Array
    Join Date
    Mar 2008
    Location
    SYD-SG-JPN-MY
    Quote Originally Posted by cnez View Post
    as mentioned above, i too have a set of foglights that i am meaning to install. my problem is that i dont know how the wiring should be. these are oem eg6 foglights and for some reason there doesnt seem to be any sort of relay on the harness.

    its not aftermarket like kcoklas but i'm sure both can be sorted out if someone can drop some knowldge.
    ive gotten mine done;

    heres a diagram how it should be -


    this link may also help:http://www.honda-tech.com/showthread.php?t=2526151

    ok - take note
    the fuse area thing -
    it should go in the 2nd slot from the RIGHT hand side - and they only turn on when your parker lights are on - be aware(accessory slot)

    there is also a grounding which i havent drawn in the same spot as the switch/accessory slot.

    if you have that setup, i dont see why it wouldnt work.

    If they still dont;

    check your grounds,

    check the slot

    check the relay (does it even get warm? if so theres obviously power going through)

    another test you can try :

    unplug one of the foglights and see if one out of the two works, and try it both ways.
    if it ever does work (one of them) ibelieve your fuse will blow which you can replace, and then you've found the problem with the wiring on the foglight plug itself may be bad/not very good. Make sure the wires go straight in and arnt exposed to the metal bracket

    any problems feel free to pm me, ill try my best


    What was my problem? i had it plugged into the wrong accessory the entire time(mis-read other DIY's and was reading up many last night only to realise it took a simple change!! stupid me!)
    Last edited by kcokla; 26-01-2010 at 09:51 AM.

  12. #24
    Member Array
    Join Date
    Jan 2009
    Location
    garage
    Car:
    eg4
    awesome post.

    i should have a relay with the stanley foglights correct? i dont seem to have one....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.