[GD3] Rear Spoilers?!?!

Hey Guys.

I bought a "mugen style" spoiler for me jazz way back, and well when i put it on, there was kind of a problem, u see when the hatched opened it pivoted so that the top of the spilers feet would crush on the back edge of the roof.

if u can imagine it? ill upload some picks after...

the spoiler is all abs plastic ive filled the hatch holes abit further, so it hits less.
but my mum drives it now n then and she isn't thoughtfull and lets the thing flick up and crack it...

so any ideas? is i was thinking abt getting a carbon fiber GT wing or w.e but it would have to be on a large angle pointing back and then have the wing on the end, anyone know where i can get one?

heres a pic of what it looks like but this isnt it...
http://www.racingraven.net/HN-JZ-006...n_Spoiler2.JPG

you need redrill custom holes, take a pic of the screws underneath the hatch....

btw i still need to get back to you on the Js Lip just been very busy lately.

Quote:

---

Originally Posted by fillit

you need redrill custom holes, take a pic of the screws underneath the hatch....

btw i still need to get back to you on the Js Lip just been very busy lately.

---

Yeh, dont worry too much im still eager :D

and regards to the spoiler, its as far back as it can be, maybe have to cut a slot out for it :/

not too sure, i need to take a look at it i have the same spoiler but i don't have that problem (i have a real cf one though) :S i'll take a pic of mine tmr and show you

Quote:

---

Originally Posted by GU357

heres a pic of what it looks like but this isnt it...
http://www.racingraven.net/HN-JZ-006...n_Spoiler2.JPG

---

Looks like the stock spoiler.. just lifted?

Quote:

---

Originally Posted by flipfire

Looks like the stock spoiler.. just lifted?

---

my thoughts exactly, so i thought it would fit. but its just been a pain not to bad before but with the rain im getting more water in the gap.
and the gap is only there cos the spoiler keeps hitting the thing fml -.- il take a pic of mine tonight n show u guys :/

Quote:

---

Originally Posted by fillit

not too sure, i need to take a look at it i have the same spoiler but i don't have that problem (i have a real cf one though) :S i'll take a pic of mine tmr and show you

---

whilst ur at it grab a pic of that racing lip too pls ^^

http://i1184.photobucket.com/albums/...z/IMG_0820.jpg
http://i1184.photobucket.com/albums/...z/IMG_0821.jpg
http://i1184.photobucket.com/albums/...z/IMG_0822.jpg
http://i1184.photobucket.com/albums/...z/IMG_0823.jpg

despite the dirt LOL
you can see the pressure is causing it to crack :(

looks like your spoiler is abit thicker than mine, umm.. i suppose you wouldn't be interested in a cf version of that which wouldn't scrape would you? ;P

By looking at the picture of your spoiler, I think the shape is different to the normal one........where did you buy the spoiler from ???

fcukn ebay!!!

and it was an aussie shop so i thought i could trust em xD.
so far thai parts have been more compatible LOL

and yeh sure Phil if u can fit all that into the box just give me a total price

http://img651.imageshack.us/f/img0509medium.jpg/

http://img718.imageshack.us/f/img0510medium.jpg/

http://img718.imageshack.us/f/img0510medium.jpg/

here are pics of mine buddy, it's a CF mugen style one. I've added you on msn to discuss about any of the purchases and i've finally took pics of the Js lip.


pics aren't attaching to the post for some reason :(

yeh maybe the wrong code got pasted LOLOL, looks like link code rather than img tag xD

well ill tkae it how much?
and when r u parting out?

sooo.... anyone got a duckbill spoiler laying around?

anyone know who makes them other than spoooooooooooooooooooon?

wth is a duckbill spoiler?

is it like the J's racing GT wing?

Spoon duckbill.

http://www.ozhonda.com/forum/showthr...567-Long-time-!

WOW thats a nice Jazzzzzzz
and nah no ideas for the spoiler, mugen style ones seem to be easiest to get atm

guys have any idea if a GD1 spoiler fits onto a GD3?

GD1 doesn't come with a spoiler? but if it was an aftermarket one then yes.

about the fitting, is it possible to scrap/cut some of the bottom bit of the 2 support (to make it sit lower) of your spoiler?
your spoiler should be those remodel from some spoiler so the mold didn't do properly so the product became a bit larger so it touch the hatch edge...

yeh i probably could do that then just repair and repaint then i might sell it again ahaha, but i got one from fillit so maybe another day unless theres demand

hate to bring this back from the grave but this guy has those spoon spoilers ouch wanted and they are pretty cheap too

will a GE bonnet fit on a GD?

http://sydney.gumtree.com.au/c-Cars-...AdIdZ328241204

okay im confused, you mean spoiler right?

and no it wont

Hey guys i just bought gd1 recently n had no spoiler. I bought a mugen spoiler but dont know where to drill holes to attech the spoiler. If n one has time or knoes a diy can u please link me or take some pics. It would b realyy greatful

1. measure out the length between the holes and divide by 2
2. Then measure boot lid width up top and find the center.
3. use your measurement of the half distance between boot lid holes to make 2 straight line markings either side.
4. then measure the distance that the holes are in from the front of the spoiler.
5. place spoiler inlin with the middle the spoiler holes should be in line with your verticle markings from step 3
6. use the marker to create a small outline of the spoiler that intersecs the lines from step 3.
7. then use the measurements from step 4 place a small horizontal line in the appropriate spot so you create an X
8. drill on the X

or

get 2 paper squares. place one on each of the contact areas of the spoiler (1 on left and 1 on right leg) and hold it on with tape.
pop a hole though the paper with a pen or something sharp so that the pen goes through the screw hole in the spoiler.
then lightly sprinkle/spray water onto the boot lid near mounting points.
and place the spoiler on the car so it is central with same gap either sides and remove the tape from the spoiler, and getnly lift the spoiler off so that the paper remains on the car, make sure the paper doesnt move
tape the paper down and drill thought the hole indicated by the paper.

remember when drilling into the car to use a product that will prevent rust from forming and to give the surrounding area a blow and then wipe it (dry cloth). incase any steel fillaments fall around because they will rust into the paint and the car.

Thanks buddy... Mostly appriciated.... I will atempt this soon and will post up results.. Hopefully good results...

good luck!