Printable View
Ok so i have a D16 in my EG and now and then it like to stall straight after starting it up and you cant accelorate or anything to stop it it just stalls then you try start it again and it just turns over its like the fuel pump is on it way out but i read somewhere it could be the fuel regulator?? anyone had this problem or know how to fix it
Any help would be awesome
Mic
When cold, or warm?
Are you giving it enough time to prime the fuel lines?
mainly when cold but it has done it when warm and yea i let it prim all the time still does it
check fuel filter?
Main relay, common fault. Engine will start and conk out. Won't restart. Leave it for 5-10 minutes and it's starts no prob. Sometimes will start OK, then after a short drive to the shops or somewhere, then does the same.
Next time it does it, turn on the ignition without using the starter and listen for the sound of the fuel pump. If you can't hear it circulating fuel(whirring), it's the relay.
^
Yeah that's what I was hinting at Ray.
Main relay = re-weld job.
Yeap sounds like a main relay....
http://techauto.awardspace.com/mainrelay.html
Just had a read of that, should be stickied.Quote:
Originally Posted by JPR28610
ok how hard is this goin to be im poor as a mofo and goin to give it a go myself lol
2-3 out of 5 hardness. Got a solder?
Have you ever done any soldering ?
nope and nope ahhaha but im always up for trying something lol
yeah pop, its a good read ay..
mik give it a go! whats the most you have to lose? stuffing up a stuffed relay? plus you gain a handy solder iron anyways :)
Get some wire to practice on, or better still, find an old circuit board. I'll have a look on youtube, see if I can find some useful vids, but Milo and beddy-byes time now, so g'nite all.
wat do you think a new regulator would be worth if i screw this one up ??
Well. Youtube was b****y useless, couldn't find a decent vid that would give you something to go on. That link posted up by JPR28610 on post 7 is pretty good, so I hope you can get something from that and maybe some advice from where you get your soldering iron from. If you've got a JAYCAR shop near you, would be a good place to go.Quote:
Originally Posted by hondapop
Never had to buy one. Have to try a Honda dealer or maybe Repco. Don't forget it's the main relay you want, not a regulator haha.Quote:
Originally Posted by MIK020
I think I have a jaycar near me I'll have a look and YouTube can suck some times on tutorial videos lolQuote:
Originally Posted by hondapop
Cool thanks I might get the store man at work o find out for meQuote:
Originally Posted by hondapop
ok so went threw nearlly ever auto parts dealers and the only one that can get it is brusons auto parts and it will have to come from melbourne and will cost 200 including shipping now i dont have that i lost my job and im running on scraps lol i need it now since the car no longer runs starts and stalls almost straight away anyone in brisbane know of anywhere to get one ive tried wreckers to and there all screwed to lol