Page 1 of 2 12 LastLast
Results 1 to 12 of 19

Thread: D16Y Stalling

  1. #1
    Member Array
    Join Date
    May 2011
    Location
    Brisbane
    Car:
    92 EG Civic

    D16Y Stalling

    Ok so i have a D16 in my EG and now and then it like to stall straight after starting it up and you cant accelorate or anything to stop it it just stalls then you try start it again and it just turns over its like the fuel pump is on it way out but i read somewhere it could be the fuel regulator?? anyone had this problem or know how to fix it

    Any help would be awesome
    Mic

  2. #2
    Moderator Array
    Join Date
    Apr 2008
    Location
    Melbourne
    Car:
    '90 EF8/'94 EH9
    When cold, or warm?

    Are you giving it enough time to prime the fuel lines?

  3. #3
    Member Array
    Join Date
    May 2011
    Location
    Brisbane
    Car:
    92 EG Civic
    mainly when cold but it has done it when warm and yea i let it prim all the time still does it

  4. #4
    check fuel filter?

  5. #5
    Main relay, common fault. Engine will start and conk out. Won't restart. Leave it for 5-10 minutes and it's starts no prob. Sometimes will start OK, then after a short drive to the shops or somewhere, then does the same.
    Next time it does it, turn on the ignition without using the starter and listen for the sound of the fuel pump. If you can't hear it circulating fuel(whirring), it's the relay.

  6. #6
    Moderator Array
    Join Date
    Apr 2008
    Location
    Melbourne
    Car:
    '90 EF8/'94 EH9
    ^

    Yeah that's what I was hinting at Ray.

    Main relay = re-weld job.

  7. #7
    Member Array
    Join Date
    Nov 2011
    Location
    nimbin
    Car:
    DC5R, EG & EP3R
    Yeap sounds like a main relay....

    http://techauto.awardspace.com/mainrelay.html
    BARPPP

  8. #8
    Quote Originally Posted by JPR28610 View Post
    Yeap sounds like a main relay....

    http://techauto.awardspace.com/mainrelay.html
    Just had a read of that, should be stickied.

  9. #9
    Member Array
    Join Date
    May 2011
    Location
    Brisbane
    Car:
    92 EG Civic
    ok how hard is this goin to be im poor as a mofo and goin to give it a go myself lol
    Last edited by MIK020; 31-01-2012 at 08:56 PM.

  10. #10
    Moderator Array
    Join Date
    Apr 2008
    Location
    Melbourne
    Car:
    '90 EF8/'94 EH9
    2-3 out of 5 hardness. Got a solder?

  11. #11
    Have you ever done any soldering ?

  12. #12
    Member Array
    Join Date
    May 2011
    Location
    Brisbane
    Car:
    92 EG Civic
    nope and nope ahhaha but im always up for trying something lol

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.