Guys i've just picked up an 00 Em1 and am looking to change the engine mounts on the b16a2. Just wanted to check if these would fit or not?
Ebay Link
Printable View
Guys i've just picked up an 00 Em1 and am looking to change the engine mounts on the b16a2. Just wanted to check if these would fit or not?
Ebay Link
Dude,
i'd double check that listing looks sus to me.
The title says 96-00 civic ...where if u read the description it states"
YEARS MAKE MODEL NOTES
1988-1991 Honda Civic/CRX
the fckin title and description dont match...even the pics of the engine mounts dont look like B-series.
this one here is the correct mounts almost the same price too.
http://www.ebay.com.au/itm/ENGINE-MO...item3ca9b19977
The mounts pictured are the right ones for an EK/EM1.
B-series, D-series EK mounts are the same.
Looks like a POS to me.Quote:
Originally Posted by dorikin
Thin bracket /mounting design, even my c0ck is thicker than these mount design .. Lol
Thats the design of the steel innovative mounts, doesnt need to be thick when using steel, The mounts you linked are made from aluminum hence the need to be thicker.Quote:
Originally Posted by IV73CI
Id prefer to get hasport mounts, The shop in the link is an authorised dealer.
http://www.ebay.com.au/itm/Hasport-9...item19cc93f20a
I guess so..Quote:
Originally Posted by TbM
Id still get the billet allum mounts rather than ugly steel look.
+1 for hasports mounts. Abit pricey but hey.
U could also try blox, Avid, other un known allum made billet mounts.
Yeh definately prefer billet mounts, ive got some hasports(62A) on my car and they look nice and do their job well.
The hasports arnt too much more when you factor in postage,
Ur link = 358.92 AU inc postage
Hasport = 376.68 AU inc postage
For less than $20 extra id definately go hasports.
Hardrace also make some oem type replacement mounts. IIRC they are meant to be softer and give you less vibrations, more like stiffened oem mounts rather than solid urethane.
http://www.ebay.com.au/itm/Hardrace-...item415f7481d9
yeh forgot to mention HARDRACE ,,
but yeh go Billet rather than POS IMO :p
Thanks for the tips ;) Also i noticed they say 2 bolt or 3 bolt whats the difference?
Which link or mounts you talkng about??Quote:
Originally Posted by welby
Its to do with the passenger side engine bracket, some came with 2 bolts some came with 3 depending on model etc, if you look at you passenger side mount you will be able to see if your has 2 or 3 bolts, should be 2 IIRC but better to check as you only have to lift the bonnet so not hard to check.Quote:
Originally Posted by welby
Heres a pic of mine before i changed to hasports, ive pointed out the bolts, they are the ones closest to the engine, mine is a 2 bolt as you can see, if yours is the same then its 2 bolt.
http://i1220.photobucket.com/albums/...IMAG1247-2.jpg
It's not dependent on model. All EK came with 2 bolt.
Reason they offer 3 bolt is if you have a B18C swap.
Ic ic.. Was thinkin of this mount but was too dark to check in the car lol
Ok makes sense thanks ;)