Problem with Momo s/w and boss kit

hey guys
i just got a momo steering wheel, for my gen3 crx, got an original momo boss kit as well, for a civic i think, problem is that, now everything is bolted back up but not sure how to get the horn to work
also the indicators dont turn off by themself anymore
could it be that i have to cut some of the plastic casing, where the boss kit sits against, right now the back piece of metal that activates the horn doesnt seam to touch the boss kit
can anyone help, is it the boss kit, or are all honda boss kits the same

thanks louis

if u get a momo do u definately need a boss kit?

Quote:

---

Originally Posted by daniel b16a

if u get a momo do u definately need a boss kit?

---

way to hijack a thread, but to answer ur question, if u get any aftermarket wheel, u will need! a boss kit

hey everyone i got the horn workin, just had to ground the horn button,
but the indicators still dont turn off by themself, can anyone help with this

thanks louis

Take the casing off the steering column and make sure everything is in place.

I couldn't imagine it having anything to do with the steering wheel itself but you may have broken something when installing the boss kit.

GL

your boss kit is probably not touching the return collar on the column that is ment to trip the indicator return.

also it might not have the notches in it that the factory wheel had.

you either have to put the collar more forwars and give it some WD40.

or amke sure your bosskit is driving it.

heres a pic(from the stock wheel), the cirled thing on the boss kit doesnt connect to the plastic thing at the end of the steering column(might be as u said ecu man, thing that trips the indicator return

there is a gap of about 1cm between boss kit and that plastic thing

Quote:

---

also it might not have the notches in it that the factory wheel had.

---

not really sure what u mean by this, but i'll take better pics 2moro
edit: oops sorry my bad forgot to attach it

i dont see any pics !!!

there should be no gap. they are ment to touch

here are some pics i just took
as u can see there is a small gap, its as far in as the boss kit will go though

in the 1st pic the metal tab point to the left must sit into the notch on the boss kit

Quote:

---

Originally Posted by ECU-MAN

in the 1st pic the metal tab point to the left must sit into the notch on the boss kit

---

yeh kind of figured that, but the boss kit doesnt go in anymore, do i have to pull the white plastic/metal bit out(on the right in the first pic) to connect to the boss kit?

its ok now, all fixed everything works
in the end i just wedged out the white plastic thing so it sits flush with the boss kit, and now the indicators and horn work

thanks for ur help ecu man

no probs

good thinking with the plastic :thumbsup: