Printable View
Guys,
i need some comfirmation on something.
im sick of my sedan front and have now decided to put the eg hatch front on it.
from what ive read i need to source out:
eg hatch front bumper
eg hatch bonnet
eg hatch front left fender
eg hatch front right fender
is this all i need ?
i got this quote from HONDWRECK for new parts
eg hatch front bumper - $100
eg hatch bonnet - $190
eg hatch front left fender - $90
eg hatch front right fender - $90
sounds resonable?
you will also need a radiator surport beam if you car is either a different model or if there was a face lift in the eg models and you have the other face, i had to do this with my civic as i went from the 98 to the 99 front end
yep, rad support needed. which means welding
damn!!! i thought it was straight bolt ons
welding shudnt cost to much
anyone recommend a place to do this????
plus u need all the lights too
it will not fit.
well it will all bolt on.
BUT.
there will be a 2 inch gap between your door and the gaurd.
btw people, this is a EG, not a EK
head lights are the same.
radiator support is the same.
hatch corner lights are different, hatch ones are shorter.
hatch gaurds are shorter.
hatch bonnet is shorter.
plus the gap where the hatch corner lights go into the gaurd are smaller.
i have attempted this myself, got a front end from a hatch, and it left about a 2inch gap between the gaurd and the door.
if you wanted to, custom make your gaurds practically.
15-POV just has the hatch bumper on his sedan, it's not perfect as it is shorter on the sides at the wheel arches, but if you are not too picky it looks reasonable
so wat ur saying is that if i did get
eg hatch front bumper
eg hatch bonnet
eg hatch front left fender
eg hatch front right fender
and hatch headlights
and bolt it on my seden
there would still be a gap between the front door and the front guards?
Isnt that why u get the new rad support?Quote:
Originally Posted by destrukshn
no.Quote:
Originally Posted by aimre
radiator support between hatch and sedan is the SAME.
yes it will go on, but won't sit flush.Quote:
Originally Posted by Boban
the corner lights won't fit properly.
and that gaurd flare is thicker on the hatch.
i had a front ender once
took hatch radiator support fitted onto my sedan
left the front guards and corners (sedan)
wacked on std front bar
put on hatch bonnet and it was perfect - though the nose of the bonnet stuck out a tad bit
weird yes lol
the last couple replies has enlighted me
ill proceed with the hatch front
should b FULLY SICK
:]
whats a radiator support?
why would u go through such a thing, with such little difference..?
looks better
in jap the last model of the eg9 came in the eg front bar but good luck finding 1.....
Ok cool,Quote:
Originally Posted by destrukshn
from the countless threads ive read, ppl said this WASNT the case. But i know u work at Spare parts so id take your word for it.
so thats one less thing i gotta change
so what are you gonna do?Quote:
Originally Posted by -[NoS]-
just use a hatch front bar?
or use the other panels as well?
if you use the gaurds, it will leave a 2 inch gap.
this guy has done it well
http://i18.photobucket.com/albums/b1...4door/home.jpghttp://i18.photobucket.com/albums/b1.../94_ferio4.jpghttp://i18.photobucket.com/albums/b1...d4door/hai.jpg
might do some more research
^ What rims are they anyway? :D
in my thought the headlight or the headlight stay will be different sedan and hatch, but after i look this thread said not.. it's hard to say with the fender, front bar, it'll leave a gap.. but my suggestion is "just go for it" :D
- going on from what JT (destrukshn) said
- u gotta use hatch guards as the corners(blinkers) are different - hence the gap
- one of the melb guys (dr4gon) one it to his sedan
- search the appearence section if its still posted
ill go for it
but i need a place that would do it
any recommendation guys????
im in southeast melb
u do not need all lights
rad suppport is the same.
all u need is the above parts mentioned and the corner indicators
is there still a 2 inch gap danny?
the guards on that sedan look aftermarket, no indicators, or maybe he shaved them. I thought about just wacking on the bumper but i can't find one that is cheap enough and in reasonable condition.
They are either cheap, or in good condition
But than again i had a look at a eg hatch today, so hopefully i might get that and get rid of my sedan
off topic, but if you want to be different
http://img410.imageshack.us/img410/2164/o25489uq6.jpg
LOL
funny shit
LOL thats soo random
-[NoS]- why don't u sell ur sedan & buy another hatch?
as Kerb Weight for Sedan is 1046kg & Hatch is 1013kg
Wheel Base for sedan is 2620mm & Hatch is 2570mm
i believe for handling hatch much better than sedan <- (just my point of view)